Acer Extensa 5630z Service Guide
Have a look at the manual Acer Extensa 5630z Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 365 Removing the Hard Disk Drive Module 1.See “Removing the Battery Pack” on page 54. 2.See “Removing the Lower Cover” on page 57. 3.Remove the one screw (B) securing the hard disk drive module. 4.Using the plastic tab, slide the hard disk drive module away from the connector; lift up the hard disk module to remove from the bay. NOTE: To prevent damage to device, avoid pressing down on it or placing heavy objects on top of it. StepSize (Quantity)ColorTo r q u e 1 M2 x L4 (1) Silver 1.6 kgf-cm
66Chapter 3
5.Remove the two screws (E) securing the hard disk to the bracket and remove the hard disk from the
bracket.
Removing the Optical Drive Module
1.See “Removing the Battery Pack” on page 54.
2.See “Removing the Lower Cover” on page 57.
StepSize (Quantity)ColorTo r q u e
1~2 M3 x L4 (2) Silver 3.0 kgf-cm
Chapter 367 3.Remove the one screw (C) from the bottom panel. 4.Use a screw driver to carefully push the odd drive tray out as shown. 5.Slowly pull out the odd module from the odd drive bay. StepSize (Quantity)ColorTo r q u e 1 M2.5 x L6 (1) Black 3.0 kgf-cm
68Chapter 3 6.Remove the one screw (A) securing the locker bracket and remove the locker bracket from the optical disk drive module. StepSize (Quantity)ColorTo r q u e 1 M2 x L3 (1) Silver 1.6 kgf-cm
Chapter 369 Main Unit Disassembly Process Main Unit Disassembly Flowchart Screw List ItemScrewColorPart No. A M2 x L3 Silver 86.9A552.3R0 B M2 x L4 Silver 86.9A552.4R0 C M2.5 x L5 Black 86.00E33.736 D M2 x L8 Black 86.00E34.738 F M2 x L3 Silver 86.00E13.524 H M2 x L3 Silver 86.00C07.220 MAIN UNIT KEYBOARD MAIN BOARD Bx3 MAIN UNIT DISASSEMBLY LCD MODULE Bx2 Bx2, Dx2 UPPER CASE Cx14 CPU/VGA THERMAL MODULE CPU SCREWX5(CPU) MODEM BOARD MODULE HEAT SINK FAN TOUCHPAD BRACKET MIDDLE COVER VGA CARD SCREWX4(VGA) Bx2 POWER BOARD SPEAKER MODULE Hx2Fx2,Ax1 Ax 1 LAUNCH BOARD TOUCHPAD MODULEFINGERPRINT MODULE Ax 2 Ax1 Bx2 USB BOARD MODULEBx1
70Chapter 3 Removing the Middle Cover 1.See “Removing the Battery Pack” on page 54. 2.Use a plastic screw driver to pry loose the side of the middle cover. 3.Carefully pry loose the middle cover from the latches securing it and turn it over on the keyboard to gain access to the cable connected to the power board. 4.Disconnect the cable connected to the power board and remove the middle cover from the system.
Chapter 371 Removing the Power Board 1.See “Removing the Battery Pack” on page 54. 2.See “Removing the Middle Cover” on page 66.
72Chapter 3 3.Remove the one screw (A) securing the power board to the middle cover. 4.Release the power board from the latches and remove it from the middle cover. StepSize (Quantity)ColorTo r q u e 1 M2 x L3 (1) Silver 1.6 kgf-cm
Chapter 373 Removing the Keyboard 1.See “Removing the Battery Pack” on page 54. 2.See “Removing the Middle Cover” on page 66. 3.Remove the two screws (A) securing the keyboard. 4.Carefully pry loose the keyboard and turn it over on the touchpad area. StepSize (Quantity)ColorTo r q u e 1~2 M2 x L3 (2) Silver 1.6 kgf-cm
74Chapter 3 5.Disconnect the keyboard cable from the main board to remove the keyboard. Removing the Heatsink Fan Module 1.See “Removing the Battery Pack” on page 54. 2.See “Removing the Lower Cover” on page 57. 3.Disconnect the heat sink fan connector from the main board.