Acer Aspire S3 Ms2346 Service Guide
Have a look at the manual Acer Aspire S3 Ms2346 Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Machine Maintenance3-57 5. Connect the keyboard cable to the mainboard (1) and then push the connector latch ( 2) until it locks into place. Figure 3-92. Keyboard Cable 6. Connect the WLAN & mini 1 cables ( 1) to the mainboard, then press the connector latch ( 2 ) until it locks into place.Connect the power cable to the mainboard ( 3). Figure 3-93. WLAN, Mini 1 & Power Cables
3-58Machine Maintenance 7. Connect the touchpad cable to the mainboard (1) and then press the connector latch ( 2) until it locks into place. Figure 3-94. Touchpad Cable
Machine Maintenance3-59 Replacing the Card Reader Board0 1. Place the card reader board in its slot in the upper case. Figure 3-95. Card Reader Board 2. Secure the card reader board to the upper case using two screws. Figure 3-96. Card Reader Board Screws Table 3-96. Screws StepScrewQuantityScrew Type Card Reader Board Reassembly M2 x L3 2
3-60Machine Maintenance 3. Connect the card reader cable to the mainboard and the card reader board. Figure 3-97. Card Reader Cable
Machine Maintenance3-61 Replacing the HDD Module0 NOTE:NOTE: For models that have SSD disk drive installed, please proceed to page 3-64, “ Replacing the SSD Module ” 1. Place the HDD module in the bracket ( 1) and then secure the HDD bracket using four screws ( 2). Figure 3-98. HDD Bracket Screws 2. Connect the cable to the HDD module. Figure 3-99. HDD Cable Table 3-98. Screws StepScrewQuantityScrew Type HDD Bracket Reassembly M3 x L44
3-62Machine Maintenance 3. Place the HDD module in its slot in the upper case. Figure 3-100. HDD Module 4. Secure the HDD module to the upper case using one screw. Figure 3-101. HDD Module Screw Table 3-101. Screw StepScrewQuantityScrew Type HDD Module Reassembly M2 x L31
Machine Maintenance3-63 5. Connect the HDD cable to the mainboard. Figure 3-102. HDD Cable 6. Secure the HDD cable to the upper case using adhesive tape. Figure 3-103. HDD Cable Adhesive Tape
3-64Machine Maintenance Replacing the SSD Module0 1. Place the SSD module in the bracket (1) and then secure the SSD bracket using four screws ( 2). Figure 3-104. SSD Bracket Screws 2. Connect the cable to the SSD module. Figure 3-105. HDD Cable Table 3-104. Screws StepScrewQuantityScrew Type SSD Bracket Reassembly M3 x L44
Machine Maintenance3-65 3. Place the SSD module in its slot in the upper case. Figure 3-106. SSD Module 4. Secure the SSD module to the upper case using one screw. Figure 3-107. SSD Module Screw Table 3-107. Screw StepScrewQuantityScrew Type SSD Module Reassembly M2 x L31
3-66Machine Maintenance 5. Connect the SSD cable to the mainboard. Figure 3-108. SSD Cable 6. Secure the SSD cable to the upper case using adhesive tape. Figure 3-109. SSD Cable Adhesive Tape