Acer Aspire 5737z Service Guide
Here you can view all the pages of manual Acer Aspire 5737z Service Guide. The Acer manuals for Notebook are available online for free. You can easily download all the documents as PDF.
Page 81
Chapter 371 4.Lift the back edge of the TouchPad bracket first to clear the securing clips and remove it as shown.
Page 82
72Chapter 3 Removing the Left Speaker Module 1.See “Removing the Upper Cover” on page 66. 2.Remove the two securing screws from the module. 3.Remove the adhesive tape as shown. 4.Lift the Left Speaker Module upward to remove it from the chassis. StepSizeQuantityScrew Type Left Speaker ModuleM2.5*3 2
Page 83
Chapter 373 Removing the Right Speaker Module 1.See “Removing the Upper Cover” on page 66. 2.Remove the single securing screws from the Right Speaker Module. 3.Remove the Right Speaker Module from the chassis as shown. StepSizeQuantityScrew Type Right Speaker ModuleM2.5*6 1
Page 84
74Chapter 3 Removing the USB Board 1.See “Removing the Upper Cover” on page 66. 2.Disconnect the USB cable from the USB Board. 3.Remove the single securing screw from the board. 4.Remove the board from the chassis. StepSizeQuantityScrew Type USB Board M2.5*6 1
Page 85
Chapter 375 Removing the Bluetooth Module 1.See “Removing the Upper Cover” on page 66. 2.Disconnect the Bluetooth cable from the Bluetooth Module. 3.Lift the module clear of the chassis.
Page 86
76Chapter 3 Removing the Mainboard 1.See “Removing the Upper Cover” on page 66. 2.Disconnect the USB cable from the Mainboard. 3.Disconnect the Bluetooth cable from the Bluetooth Module. 4.Remove the three securing screws from the Mainboard. StepSizeQuantityScrew Type Mainboard M2.5*5 3
Page 87
Chapter 377 5.Pivot the Mainboard upward and remove it from the chassis, right side first. Place the Mainboard on a clean, dust-free surface. 6.Turn the Mainboard over and disconnect the Bluetooth cable.
Page 88
78Chapter 3 Removing the Thermal Module 1.See “Removing the Mainboard” on page 76. 2.Disconnect the fan cable from the Mainboard. 3.Remove the four securing screws (in reverse numerical order from screw 4 to screw 1) from the Thermal Module. 4.Using both hands, lift the Thermal Module clear of the Mainboard. StepSizeQuantityScrew Type Thermal Module CPU_SCREW_SPRIN 4 1 2 3 4
Page 89
Chapter 379 Removing the CPU 1.See “Removing the Thermal Module” on page 78. 2.Turn the securing screw 180° to release the CPU from the socket. 3.Remove the CPU from the socket as shown. IMPORTANT:The pins on the underside of the CPU are very delicate. If they are damaged, the CPU may malfunction. Place the CPU on a clean, dry surface when it is not installed.
Page 90
80Chapter 3 Removing the RTC Battery IMPORTANT:Follow local regulations for disposal of all batteries. The RTC Battery is soldered to the Mainboard. To replace the battery, solder the new battery to the connections shown.