Acer Aspire 2930 Service Guide
Have a look at the manual Acer Aspire 2930 Service Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 720 Acer manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 381 5.Lift the cable from the housing guide as shown. 6.Ensure the modem cable is disconnected from the bottom of the mainboard as well. 7.Pry the edge of the Lower Base outward then lift and pivot the Mainboard slightly upwards. Do not pull up completely.
82Chapter 3 8.Continue to pry the base outward, while lifting the mainboard at the same time. 9.Once the bottom of the mainboard is clear of the lower case, continue lifting the mainboard. Take note of the DC-IN cable. 10.Remove the Mainboard from the lower base.
Chapter 383 Removing the RJ-11 Jack 1.Remove the Mainboard. See “Removing the Mainboard” on page 80. 2.Locate the RJ-11 cable end and remove to the mylar cover. 3.Remove the RJ-11 jack. 4.Turn the Lower Base over and pull back the mylar cover to release the cabling.
84Chapter 3 5.Ensure all parts of the cabling are no longer secure to the base, and pull the cable completely through to remove.
Chapter 385 Removing the Fan/Thermal Module 1.Remove the Mainboard. See “Removing the Mainboard” on page 80. 2.Disconnect the Fan cable from the mainboard. 3.Loosen the four (4) captive screws in numerical order from 4 to 1. IMPORTANT:Lift the Fan/Thermal Module by the thermal assembly to avoid damage to the CPU 4.Grip the Thermal Module and pivot upwards to remove.
86Chapter 3 Removing the CPU 1.Remove the Mainboard. See “Removing the Mainboard” on page 80. 2.Take note of the indicators on the socket cam screw. Using a flat screwdriver, turn the CPU socket screw counter-clockwise until it indicates unlocked. k 3.Lift the CPU clear of the Mainboard.
Chapter 387 LCD Module Disassembly Process LCD Module Disassembly Flowchart Screw List StepScrewQuantityPart No. LCD Bezel M2.5*5 4 86.ART02.004 Inverter Board M2.5*4 1 86.ART02.003 Camera Board M2.5*4 1 86.ART02.003 LCD Panel M2.5*4 2 86.ART02.003 LCD Brackets M2*4 4 86.ART02.002 Rem ove LCD Panel Rem ove Inverter Board Rem ove LCD Bezel Rem ove AntennasRem ove Internal MicrophoneRem ove LCD FPC Cable Rem ove Camera Module Rem ove Left/Right LCD Bracket LCD AssemblyLCD Panel Remove LCD Panel from Main Unit before proceeding
88Chapter 3 Removing the LCD Bezel 1.Remove the LCD Module. See “Removing the LCD Module” on page 66. 2.Remove the four rubber covers and screws. 3.Starting from the inside edges, pry the inside of the bezel upwards from the panel. Continue moving left until the bezel is removed. If necessary, use a plastic pry to release the corners of the bezel. StepSizeQuantityScrew Type LCD Bezel M2.5*5 4
Chapter 389 4. Lift up the bezel and disconnect the MIC module. 5.Remove the bezel from the LCD module.
90Chapter 3 Removing the Inverter Board 1.Remove the LCD Bezel. See “Removing the LCD Bezel” on page 88. 2.Pull back the adhesive strip to expose the cabling. 3.Remove the single securing screw. 4. Lift the Inverter board clear of the LCD Module. StepSizeQuantityScrew Type Inverter Board M2.5*4 1