Acco Nobo Projector S17E User Manual

English
31
Appendices
Problem: No image appears on screen
4 Ensure all the cables and power connections are correctly and 
securely connected as described in the “Installation” section.
4 Ensure the pins of connectors are not crooked or broken.
4 Check if the projection lamp has been securely installed. Please 
refer to the “Replacing the lamp” section.
4 Make sure you have removed the lens cap and the projector is 
switched on.
4 Ensure that the “Hide” feature is not turned on.
Problem: Partial,...

English
32
Appendices
5.  Select the “Change” button under the “Monitor” tab .
6.  Click on “Show all devices.” Next, select “Standard monitor 
types” under the SP box; choose the resolution mode you need 
under the “Models” box. 
4  If you are using a Notebook:
1.  First, follow the steps above to adjust resolution of the computer.
2.  Press the toggle output settings. Example: [Fn]+[F4]
  
4  If you experience diffi  culty changing resolutions or your monitor 
freezes, restart all equipment including...

English
33
Appendices
4  Make sure the projection screen is between the required distance 
4.9 to 39.4 feet (1.5 to 12.0 meters) from the projector. See page 16.
Problem: The image is stretched when displaying 16:9 DVD
The projector automatically detects 16:9 DVD and adjusts the aspect 
ratio by digitizing to full screen with 4:3 default setting.
If the image is still stretched, you will also need to adjust the aspect 
ratio by referring to the following:
4 Please select 4:3 aspect ratio type on your DVD...

English
34
Appendices
Problem: Message Reminders
4 Fan failed: 
4 Replacing the lamp:  
 
 4 Temperature Error:   

English
35
Appendices
 Replacing the lamp
The projector will detect the lamp life itself.  It will show you a 
warning message 
“ 
” When you see 
this message, change the lamp as soon as possible.  
Make sure the projector has been cooled down for at least 30 
minutes before changing the lamp. 
Warning: Lamp 
compartment is hot!  
Allow it to cool down 
before changing lamp!
Warning: To 
reduce the risk of 
personal injury, do not 
drop the lamp module 
or touch the lamp bulb. 
The bulb may shatter 
and...

English
36
Appendices
Remark : 
1.> “
*”compressed 
computer image.
 Compatibility  Modes
Mode Resolution(ANALOG)V.Frequency
(Hz) H.Frequency
(kHz) 
VGA 640 x 350 70 31.5
640 x 350 85 37.9
640 x 400 85 37.9
640 x 480 60 31.5
640 x 480 72 37.9
640 x 480 75 37.5
640 x 480 85 43.3
720 x 400 70 31.5
720 x 400 85 37.9
SVGA 800 x 600 56 35.2
800 x 600 60 37.9
800 x 600 72 48.1
800 x 600 75 46.9
800 x 600 85 53.7
XGA 1024 x 768 60 48.4
1024 x 768 70 56.5
1024 x 768 75 60.0
1024 x 768 85 68.7
SXGA 1152 x 864 70...

English
37
Appendices
VGA-In Connector
RS232 Commands
Pin no. NameI/O (from projec-
tor side)
1
TXDOUT
2 RXD IN
3 GND __
Pin no. Spec.
1
R(RED)/Cr
2G(GREEN)/Y
3 B(BLUE)/Cb
4NC
5 GND
6 GND
7 GND
8 GND
9 DDC 5V
10 HOT_DET
11 NC
12 DDC Date
13 HS/CS
14 VS
15 DDC Clock
1 2 3 4 5
6 7 8 9 10
11 12 13 14 151
2
3
RS232 Connector 

English
38
Appendices