Acco Nobo Projector S17E User Manual

							English
31
Appendices
Problem: No image appears on screen
4 Ensure all the cables and power connections are correctly and 
securely connected as described in the “Installation” section.
4 Ensure the pins of connectors are not crooked or broken.
4 Check if the projection lamp has been securely installed. Please 
refer to the “Replacing the lamp” section.
4 Make sure you have removed the lens cap and the projector is 
switched on.
4 Ensure that the “Hide” feature is not turned on.
Problem: Partial, scrolling or incorrectly displayed image
4 
Press “Re-Sync” on the remote control or control panel.
4  If you are using a PC:
For Windows 3.x:
1.  In the Windows Program Manager, double click the “Windows 
Setup” icon in the Main group.
2.  Verify that your display resolution setting is less than or equal to 
1280 x 1024.
For Windows 95, 98, 2000, XP:
1.  Open the “My Computer” icon, the “Control Panel” folder, and 
then double click on the “Display” icon.
2.  Select the “Settings” tab
3.  Click on the “Advanced Properties” button.
If the projector is still not projecting the whole image, you will 
also need to change the monitor display you are using. Refer to 
the following steps.
4.  Verify the resolution setting is less than or equal to 1280 x 1024 
resolution.
 Troubleshooting
If you experience trouble with the projector, refer to the 
following information.  If the problem persists, please 
contact your local reseller or service center. 
						

							English
32
Appendices
5.  Select the “Change” button under the “Monitor” tab .
6.  Click on “Show all devices.” Next, select “Standard monitor 
types” under the SP box; choose the resolution mode you need 
under the “Models” box. 
4  If you are using a Notebook:
1.  First, follow the steps above to adjust resolution of the computer.
2.  Press the toggle output settings. Example: [Fn]+[F4]
  
4  If you experience diffi  culty changing resolutions or your monitor 
freezes, restart all equipment including the projector.
Problem: The screen of the Notebook or PowerBook computer 
is not displaying a presentation
4If you are using a Notebook PC:
Some Notebook PCs may deactivate their own screens when a 
second display device is in use. Each has a different way to be 
reactivated.  Refer to your computer’s documentation for detailed 
information.
Problem: Image is unstable or fl ickering
4 Use “Phase” to correct it.
4 Change the monitor color setting from your computer.
Problem: Image has vertical fl ickering bar
4 Use “Frequency” to make an adjustment.
4  Check and reconfi  gure the display mode of your graphic card to 
make it compatible with the product. 
Problem: Image is out of focus
4  Adjusts the Focus Ring on the projector lens. 
Compaq 
>   [Fn]+[F4]
Dell >   [Fn]+[F8]
Gateway 
>  [Fn]+[F4]
IBM >  [Fn]+[F7]
Mac Apple: 
System Preference > Display > Arrangement > Mirror 
display
Packard 
 >
 [Fn]+[F4]
Hewlett 
NEC >   [Fn]+[F3]
Toshiba >   [Fn]+[F5] 
						

							English
33
Appendices
4  Make sure the projection screen is between the required distance 
4.9 to 39.4 feet (1.5 to 12.0 meters) from the projector. See page 16.
Problem: The image is stretched when displaying 16:9 DVD
The projector automatically detects 16:9 DVD and adjusts the aspect 
ratio by digitizing to full screen with 4:3 default setting.
If the image is still stretched, you will also need to adjust the aspect 
ratio by referring to the following:
4 Please select 4:3 aspect ratio type on your DVD player if you are 
playing a 16:9 DVD.
4 If you can’t select 4:3 aspect ratio type on your DVD player, please 
select 4:3 aspect ratio in the on screen menu.
Problem: Image is reversed
4 Select “Management 

						

							English
34
Appendices
Problem: Message Reminders
4 Fan failed: 
4 Replacing the lamp:  
 
 4 Temperature Error:   
						

							English
35
Appendices
 Replacing the lamp
The projector will detect the lamp life itself.  It will show you a 
warning message 
“ 
” When you see 
this message, change the lamp as soon as possible.  
Make sure the projector has been cooled down for at least 30 
minutes before changing the lamp. 
Warning: Lamp 
compartment is hot!  
Allow it to cool down 
before changing lamp!
Warning: To 
reduce the risk of 
personal injury, do not 
drop the lamp module 
or touch the lamp bulb. 
The bulb may shatter 
and cause injury if it is 
dropped.
 Lamp Replacing Procedure: 
1.  Turn off the power to the projector by pressing the Power/
Standby button.
2.  Allow the projector to cool down at least 30 minutes.
3.  Disconnect the power cord.
4.  Use a screwdriver to remove the screw from the cover.n
5.  Push up and remove the cover.o
6.  Remove the 2 screws from the lamp module.p
7.  Pull out the lamp module. q
To replace the lamp module, reverse the previous steps.
 13
4 2 
						

							English
36
Appendices
Remark : 
1.> “
*”compressed 
computer image.
 Compatibility  Modes
Mode Resolution(ANALOG)V.Frequency
(Hz) H.Frequency
(kHz) 
VGA 640 x 350 70 31.5
640 x 350 85 37.9
640 x 400 85 37.9
640 x 480 60 31.5
640 x 480 72 37.9
640 x 480 75 37.5
640 x 480 85 43.3
720 x 400 70 31.5
720 x 400 85 37.9
SVGA 800 x 600 56 35.2
800 x 600 60 37.9
800 x 600 72 48.1
800 x 600 75 46.9
800 x 600 85 53.7
XGA 1024 x 768 60 48.4
1024 x 768 70 56.5
1024 x 768 75 60.0
1024 x 768 85 68.7
SXGA 1152 x 864 70 63.8
1152 x 864 75 67.5
1152 x 864 85 77.1
1280 x 1024 60 63.98
MAC LC 13” 640 x 480 66.66 34.98
MAC II 13” 640 x 480 66.68 35
MAC 16” 832 x 624 74.55 49.725
MAC 19” 1024 x 768 75 60.24
MAC 1152 x 870 75.06 68.68
MAC G4 640 x 480 60 31.35
i Mac DV 1024 x 768 75 60
i Mac DV 1152 x 870 75 68.49
i Mac DV 1280 x 960 60 60.0 
						

							English
37
Appendices
VGA-In Connector
RS232 Commands
Pin no. NameI/O (from projec-
tor side)
1
TXDOUT
2 RXD IN
3 GND __
Pin no. Spec.
1
R(RED)/Cr
2G(GREEN)/Y
3 B(BLUE)/Cb
4NC
5 GND
6 GND
7 GND
8 GND
9 DDC 5V
10 HOT_DET
11 NC
12 DDC Date
13 HS/CS
14 VS
15 DDC Clock
1 2 3 4 5
6 7 8 9 10
11 12 13 14 151
2
3
RS232 Connector 
						

							English
38
Appendices