Acco Nobo Projector S17E User Manual

English
21
 User  Controls
Menu Tree 

English
22
User Controls
 Language
 Language
Choose the multilingual OSD menu. Use the   or  key to select 
your preferred language. 
Press “Enter” to fi  nalize the selection.  

English
23
 User  Controls
 Menu location
Choose the menu location on the display screen.
 Projection
 4    Front-Desktop
The factory default setting.
 
4    Rear-Desktop 
When you select this function, the projector reverses the image 
so you can project behind a translucent screen.
 
4    Front-Ceiling 
When you select this function, the projector turns the image 
upside down for ceiling-mounted projection.
 
4    Rear-Ceiling 
When you select this function, the projector reverses and turns 
the image...

English
24
User Controls
 Keystone 
Adjusts image distortion caused by tilting projector. (±16 degrees)
 Digital Zoom
4 
Press the  to reduce the size of an image.
4 Press the  to magnify an image on the projection screen.
 Projector ID
Allows RS232 control of an individual projector. Range 01-99.
 Security 
4 
Security Timer: Can be select the time (month/day/hour) func-
tion to set the number of hours the projector can be used. Once 
the time has elapsed you will be requested to enter your pass-
word...

English
25
 User  Controls
 Projection hours
Displays the projection time.
 Lamp hours
Displays the cumulative lamp operating time.
  Reset lamp hours
Resets the lamp life hour counter after replacing the lamp. 
 Lamp Reminder
Choose this function to show or to hide the warning message 
when the changing lamp message is displayed. The message will 
appear 30 hours before end of life.
 High altitude
Choose “On” to turn on High Altitude mode. Operates the fans at 
full speed continuously to allow for...

English
26
User Controls
Image-I
(Computer Mode / 
Video Mode)
 Display mode
There are many factory presets optimized for various types of im-
ages.
4 Presentation: For computer or notebook.
4 Bright: For brightness optimization.
4 Movie: For home theater.
4 sRGB: Best colour reproduction.
4 User: Memorize user’s settings.
 Brightness
Adjust the brightness of the image.
4 Press the  to darken image.
4 Press the  to lighten the image.
 Contrast
The contrast controls the degree of difference between the...

English
27
 User  Controls
 Saturation
Adjusts a video image from black and white to fully saturated 
colour.
4 Press  the  to decrease the amount of saturation in the image.
4 Press the  to increase the amount of saturation in the image.
 Sharpness 
Adjusts the sharpness of the image.
4 Press  the  to decrease the sharpness.
4 Press  the  to increase the sharpness.
 Film mode 
Choose “On” to turn on Film Mode to eliminate the sawtooth edge 
on the projected image (if any) when the DVD movie format is...

English
28
User Controls
Image-II
(Computer Mode / 
Video Mode)
 Frequency
“Frequency”changes the display data frequency to match the fre-
quency of your computer’s graphic card. If you experience a vertical 
fl  ickering bar, use this function to make an adjustment.
 Phase
“Phase” synchronizes the signal timing of the display with the 
graphic card. If you experience an unstable or fl  ickering image, use 
this function to correct it.
  Hor. position (Horizontal Position)
4 
Press the  to move the image...

English
29
 User  Controls
  Ver. Shift (16:9)
Adjust the image position up or down, when you select the aspect 
ratio of 16:9.
4 Press the  to move the image down.
4 Press the  to move the image up.

English
30
User Controls
Full Range: 
+Red+ Red - RedEnhance Red
 Colour setting 
Adjust the Red, Green, Blue, Yellow, Cyan and Magenta colors for 
advanced adjustment of the individual colors.
 : Full range color adjustment that effects all color space.
 : Enhanced individual color adjustment that effects itself only.
Each display mode (Present/ Bright/ Movie/ sRGB/ User) has its 
own color temperature and can memorize user’s selection.
When you adjust the color setting item, the color temperature will...