A&D Scale HT Series Calibration and Function Setting Procedures User Manual
View the A&D Scale HT Series Calibration and Function Setting Procedures User Manual for free. All the A&D manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.
![Page 1
1
Calibration switch cover
Calibration switch
HT series Compact Scale
Calibration and Function Setting Procedures
Calibration
When is Calibration Required?
Calibration may be required when the HT series compact scale was initially installed or has been moved to
another location.
Calibration Using a Calibration Weight
1. Entering the calibration mode
Remove the calibration switch cover located on the bottom of the scale.
Press the [ON:OFF] switch to turn the scale on.
Press the...](http://img.usermanuals.tech/thumb/100/1699/w300_scale-ht-series-calibration-and-function-setting-procedures-1478516881_d-0.jpg "Page 1
1
Calibration switch cover
Calibration switch
HT series Compact Scale
Calibration and Function Setting Procedures
Calibration
When is Calibration Required?
Calibration may be required when the HT series compact scale was initially installed or has been moved to
another location.
Calibration Using a Calibration Weight
1. Entering the calibration mode
Remove the calibration switch cover located on the bottom of the scale.
Press the [ON:OFF] switch to turn the scale on.
Press the...")
![Page 4
4
Function Setting
Selecting Units
1. While pressing the [UNITS] key, press the [ON:OFF] key to turn the scale on.
1Unit will be
displayed.
2. Press the [RE-ZERO] key once. ゜
Unit g will be displayed.
3. Each time the [RE-ZERO] key is pressed, the display switches between ゜Unit g and ゜Unit g .
Note: The STABLE indicator in the upper left corner of the display indicates that the unit is selected and
can be used for weighing.
4. Press the [UNITS] key to select a unit. Units are displayed...](http://img.usermanuals.tech/thumb/100/1699/w300_scale-ht-series-calibration-and-function-setting-procedures-1478516881_d-3.jpg "Page 4
4
Function Setting
Selecting Units
1. While pressing the [UNITS] key, press the [ON:OFF] key to turn the scale on.
1Unit will be
displayed.
2. Press the [RE-ZERO] key once. ゜
Unit g will be displayed.
3. Each time the [RE-ZERO] key is pressed, the display switches between ゜Unit g and ゜Unit g .
Note: The STABLE indicator in the upper left corner of the display indicates that the unit is selected and
can be used for weighing.
4. Press the [UNITS] key to select a unit. Units are displayed...")