3M Multimedia Projector S10 Operators Manual
Have a look at the manual 3M Multimedia Projector S10 Operators Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 307 3M manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 3
3
Ultra High BrightnessCrisp, ultra-bright presentations is achieved by using a UHB (ultra hig\
h brightness) lamp and a highly
efficient optical system.
Whisper Mode EquippedSpecial mode is available for reducing projector noise to achieve quiete\
r operation.
User Memory FunctionThis projector can memorize 4 settings by MY MEMORY function.
Partial Magnification FunctionInteresting parts of images can be magnified for closer viewing.
Keystone Distortion CorrectionQuick correction of distorted...](http://img.usermanuals.tech/thumb/96/87414/w64_3m-s10-manual_d-2.png "Page 3
3
Ultra High BrightnessCrisp, ultra-bright presentations is achieved by using a UHB (ultra hig\
h brightness) lamp and a highly
efficient optical system.
Whisper Mode EquippedSpecial mode is available for reducing projector noise to achieve quiete\
r operation.
User Memory FunctionThis projector can memorize 4 settings by MY MEMORY function.
Partial Magnification FunctionInteresting parts of images can be magnified for closer viewing.
Keystone Distortion CorrectionQuick correction of distorted...")
![Page 7
7
Setting Up
Arrangement
WARNING• Install the projector in a suitable environment according to
instructions of the “Product Safety Guide” and this manual.
• The power outlet should be close to the projector and easily access\
ible.
Refer to the illustrations and tables below to determine the screen size\
and projection
distance.
The values shown in the table are calculated for a full size screen:800 ·600
(a):Distance from the projector to the screen (±10%)
(b):Distance from the lens center to the...](http://img.usermanuals.tech/thumb/96/87414/w64_3m-s10-manual_d-6.png "Page 7
7
Setting Up
Arrangement
WARNING• Install the projector in a suitable environment according to
instructions of the “Product Safety Guide” and this manual.
• The power outlet should be close to the projector and easily access\
ible.
Refer to the illustrations and tables below to determine the screen size\
and projection
distance.
The values shown in the table are calculated for a full size screen:800 ·600
(a):Distance from the projector to the screen (±10%)
(b):Distance from the lens center to the...")
![Page 9
9
Connecting Your Devices
WARNING• Incorrect connecting could result in fire or electrical shock.
Whenever attempting to connect other devices to the projector, please th\
oroughly read
the Product Safety Guide, this manual and the manual of each device to\
be
connected. CAUTION
• TURN OFF ALL DEVICES prior to connecting them to the projector.
Attempting to connect a live device to the projector may generate extrem\
ely loud
noises or other abnormalities that may result in malfunction and/or dama\
ge to...](http://img.usermanuals.tech/thumb/96/87414/w64_3m-s10-manual_d-8.png "Page 9
9
Connecting Your Devices
WARNING• Incorrect connecting could result in fire or electrical shock.
Whenever attempting to connect other devices to the projector, please th\
oroughly read
the Product Safety Guide, this manual and the manual of each device to\
be
connected. CAUTION
• TURN OFF ALL DEVICES prior to connecting them to the projector.
Attempting to connect a live device to the projector may generate extrem\
ely loud
noises or other abnormalities that may result in malfunction and/or dama\
ge to...")
Thank you for purchasing this projector.• The in\borm\ftion in \tthis m\fnu\fl is subje\tct to ch\fnge without n\totice. • The m\fnu\b\fcturer \fss\tumes no responsibili\tty \bor \fny errors th\ft m\t\fy \fppe\fr in this m\fn\tu\fl. • The reproduction, t\tr\fnsmission or use o\b \tthis document or conte\tnts is not permitted \twithout express written \futhor\tity. TRADEMARK ACKNOWLEDGMENT : • VGA \fnd XGA \fre re\tgistered tr\fdem\frks o\b t\the Intern\ftion\fl Busine\tss M\fchines Corpor\ftion.\t • Apple \fnd M\fc \fre re\tgistered tr\fdem\frks o\b A\tpple Computer, Inc. • VESA \fnd SVGA \fre tr\fd\tem\frks o\b the Video Ele\tctronics St\fnd\frd Assoc\ti\ftion. • Windows is \f regist\tered tr\fdem\frk o\b Microso\t\bt Corpor\ftion. All other tr\fdem\frks \fre\t the property o\b their \trespective owners. NOTE WARNINGBefore using, read the Product Safety Guide and these manuals to ensure correct usage through understanding. After reading, store them\ in a safe place for future reference. 1 S10 Multimedi\f Projector \t Oper\ftor’s Guide 4&O 1.
Projector Featuresœ œœ œœ œœ œœ œœ œœ œ 3 Preparationœ œœ œœ œœ œœ œœ œœ œœ œœ œœ œ 3 Part Namesœ œœ œœ œœ œœ œœ œœ œœ œœ œœ œ 4 The Projectorœœœœœœœœœ4 Attaching The Baseœœœœœœ4 The Remote Controlœœœœœœ6 Setting Upœ œœ œœ œœ œœ œœ œœ œœ œœ œœ œœ œ 7 Arrangementœœœœœœœœœ7 Adjusting The Projector’s Elevatorœœœœœœœœœœœ8 Connecting Your Devicesœœœœ9 Connecting Power Supplyœœœ11 Remote Controlœ œœ œœ œœ œœ œœ œœ œœ œ 12 Putting Batteriesœœœœœœœ12 Operating The Remote Controlœ13 Power ON/OFFœ œœ œœ œœ œœ œœ œœ œœ œ 14 Turning On The Powerœœœœ14 Selecting An Input Signalœœœ15 Turning Off The Powerœœœœ16 Operatingœ œœ œœ œœ œœ œœ œœ œœ œœ œœ œ 17 Adjusting The Volumeœœœœ17 Temporarily Muting The Soundœ17 Adjusting The Positionœœœœ18 Using The Automatic Adjustment Featureœœœœœœ19 Correcting Keystone Distortionsœœœœœœœœœœ19 Using The Magnify Featureœœ20 Freezing The Screenœœœœœ20 Signal Searchingœœœœœœœ21 Selecting The Aspect Ratioœœ21 Temporarily Blanking The Screenœœœœœœœœœ21Multifunctional Settingsœ œœ œœ œœ œ 22 Using The Menu Functionsœœ22 MAIN Menuœœœœœœœœœ23 PICTURE-1 Menuœœœœœœ24 PICTURE-2 Menuœœœœœœ26 INPUT Menuœœœœœœœœ27 AUTO Menuœœœœœœœœœ29 SCREEN Menuœœœœœœœ30 OPTION Menuœœœœœœœœ31 Lampœ œœ œœ œœ œœ œœ œœ œœ œœ œœ œœ œœ œ 32 Replacing The Lampœœœœœ33 Air Filterœ œœ œœ œœ œœ œœ œœ œœ œœ œœ œœ œ 34 Caring For The Air Filterœœœœ34 Replacing The Air Filterœœœœ35 Other Careœ œœ œœ œœ œœ œœ œœ œœ œœ œœ œ 36 Caring For The Inside Of The Projectorœœœœœœœ36 Caring For The Lensœœœœœ36 Caring For The Cabinet And Remote Controlœœœœœ36 Troubleshootingœ œœ œœ œœ œœ œœ œœ œ 37 Related Messagesœœœœœœ37 Regarding The Indicator Lampsœœœœœ39 Phenomena That May Easily Be Mistaken For Machine Defectsœ41 Specificationsœ œœ œœ œœ œœ œœ œœ œœ œ 43 Accessoriesœ œœ œœ œœ œœ œœ œœ œœ œœ œ 44 Contents 2 4&O 1.
3 Ultra High BrightnessCrisp, ultra-bright presentations is achieved by using a UHB (ultra hig\ h brightness) lamp and a highly efficient optical system. Whisper Mode EquippedSpecial mode is available for reducing projector noise to achieve quiete\ r operation. User Memory FunctionThis projector can memorize 4 settings by MY MEMORY function. Partial Magnification FunctionInteresting parts of images can be magnified for closer viewing. Keystone Distortion CorrectionQuick correction of distorted images electrically. Preparation Please see the “Quick Start Guide”. Your projector should come wit\ h the items shown there. Contact your dealer anything is missing. Projector Features This multimedia projector is used to project various computer signals as\ well as NTSC / PAL / SECAM video signals onto a screen. Little space is required\ for installation and large images can easily be realized. • Keep the original packing material for future reshipment.NOTE 4&O 1.
4 Part Names The ProjectorIndicates the corresponding reference page Attaching The Base Zoom knob Focus ring Air filter cover (An air filter is inside.) Elevator button Elevator feet Lens (The picture is projected from here.) Remote sensor Projector (Front/Right) 1Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at least 45 minutes. 2After making sure that the projector has cooled adequately, slowly flip over the projector, so that the bottom is facing up. 3Put the base on the bottom of the projector, as shown in the fugure. Then slide it to the back of the projector until it locks into position. To remove it, slide the base to the front of the projector pinching the lever of the base. 4Slowly turn the projector so that the top is facing up. Lever Back BaseBottom of the projector CAUTION• Be careful not to pinch your finger on the occasion of the handling of a base. • Do not hold the base, lens or other project part to move the projector. • Do not use the base to suspend the projector. • Do not push or put anything on the both sides of the top of the projector. 4&O 1.
5 AC inlet video port audio port (from a computer) s-video port component video - Y component video - CB/PB component video - CR/PR audio R port L port (from a video equipment) Power switch rgb port control port Projector (Rear/Left) Part Names (continued) The Projector (continued) Control buttons power indicator tells the state of power supply. Refer to the section “Power ON/OFF”. reset button cancels the adjustment in progress. * The adjustments of the volume etc. are not reset. rgb button selects the input signal of rgb port. menu button opens/closes the menu. on/off button prepares for turning the power on/off. video button toggles between the signal ports of video, s-video and component video . keystone button turns on/off the KEYSTONE mode. In the KEYSTONE mode, To adjust the keystone, use the cursor / buttons. temp indicator lights or blinks when any problem about internal temperature has happened. lamp indicator lights or blinks when any problem about the lamp has happened. cursor buttons works for adjusting or menu controlling. 4&O 1.
6 The Remote Control STANDBY/ON button prepares for turning the power on/off. VIDEO button toggles between the signal ports of video, s-video and component video. MENU button opens/closes the menu. RGB button selects the input signal of rgbport. BLANK button blanks the screen temporarily. SEARCH button searches for an input signal between the following signal ports of rgb, video, s-videoand component video. VOLUME button turns on/off the VOLUME mode. In the VOLUME mode, To adjust the volume, use the cursor / buttons. MUTE button mutes/restores the sound. KEYSTONE button turns on/off the KEYSTONE mode. In the KEYSTONE mode, To adjust the keystone, use the cursor / buttons. ASPECT button toggles between the modes for aspect ratio. AUTO button executes automatic adjustment. MAGNIFY ON/OFF buttons turns on/off the MAGNIFY mode. In the MAGNIFY mode, To move the magnified area, (1) Press the POSITION button. (2) Use the cursor buttons to move the picture. (3) Press the POSITION button again to finish. To shift the magnify level, use the cursor / buttons. FREEZE button freezes/reactivates the picture. POSITION button turns on/off the POSITION mode. (for RGB input) In the POSITION mode, To move the picture, use the cursor buttons. ESC button returns to the previous display at the menu functions.,,, (Cursor) buttons works for adjusting or menu controlling. RESET button cancels the adjustment in progress. * The adjustments of the volume etc. are not reset.ENTER button proceeds to the next operation at the menu functions. VIDEO ASPECT MUTE KEYSTONE FREEZE MENU POSITION ENTER ESC RESET VOLUME STANBY/ON MAGNIFY AUTO BLANK RGB SEARCH OFFON Part Names (continued) 4&O 1.
7 Setting Up Arrangement WARNING• Install the projector in a suitable environment according to instructions of the “Product Safety Guide” and this manual. • The power outlet should be close to the projector and easily access\ ible. Refer to the illustrations and tables below to determine the screen size\ and projection distance. The values shown in the table are calculated for a full size screen:800 ·600 (a):Distance from the projector to the screen (±10%) (b):Distance from the lens center to the bottom of the screen (±10\ %) (c):Distance from the lens center to the top of the screen (±10%)\ Screen Size [inch (m)](a) [inch (m)](b) [inch (cm)](c) [inch (cm)]Min.Max. 30 (0.8)35(0.9) 42(1.1)2(5)16(41) 40 (1.0)47(1.2)56(1.4)2(6)22(55) 50 (1.3)59(1.5)71(1.8)3(8)27(69) 60 (1.5)71(1.8)85(2.2)4(9)32(82) 70 (1.8)83(2.1)99(2.5)4(11)38(96) 80 (2.0)95(2.4)114(2.9)5(12)43(110) 90 (2.3)107(2.7)128(3.3)5(14)49(123) 100 (2.5)119(3.0)143(3.6)6(15)54(137) 120 (3.0)143(3.6)171(4.4)7(18)65(165) 150 (3.8)179(4.6)215(5.5)9(23)81(206) 200 (5.0)240(6.1)287(7.3)12(30)108(274) 250 (6.3)300(7.6)359(9.1)15(38)135(343) 300 (7.5)360(9.2)431(10.9)18(46)162(411) (a) (c) (b) Lens center Screen Reference for the 4:3 aspect ratio Screen Size [inch (m)](a) [inch (m)](b) [inch (cm)](c) [inch (cm)]Min.Max. 30 (0.8)38(1.0)46(1.2)0(1)15(39) 40 (1.0)51(1.3)61(1.6)1(2)20(51) 50 (1.3)64(1.6)77(2.0)1(2)25(64) 60 (1.5)77(2.0)93(2.4)1(2)30(77) 70 (1.8)90(2.3)108(2.8)1(3)35(90) 80 (2.0)104(2.6)124(3.2)1(3)41(103) 90 (2.3)117(3.0)140(3.6)1(4)46(116) 100 (2.5)130(3.3)155(3.9)2(4)51(129) 120 (3.0)156(4.0)187(4.7)2(5)61(154) 150 (3.8)196(5.0)234(5.9)2(6)76(193) 200 (5.0)216(6.6)312(7.9)3(8)101(257) 250 (6.3)327(8.3)391(9.9)4(10)127(322) 300 (7.5)393(10.0)469(11.9)5(12)152(386) (a) (c) (b) Lens center Screen Reference for the 16:9 aspect ratio Side View Side View 4&O 1.
8 Adjusting The Projectors Elevator CAUTION• If you press the elevator buttons without holding the projector, the projector might crash down, overturn, smash your fingers and possibly result in malfunction. To prevent damaging the projector and injuring yourself, ALWAYS HOLD THE PROJECTOR whenever using the elevator buttons to adjust the elevator feet. You can use the elevator feet to make adjustments if the surface on which you need to set the projector is uneven or if you otherwise need to adjust the angle of projection. The adjustment range of the elevator feet is 0 to 9 degrees. 1Press and hold in the elevator buttons. 2Raise or lower the projector to the desired height and then release the elevator buttons. When you release the elevator buttons, the elevator feet will lock into position. 3As necessary, you can also finely adjust the height of the projector by twisting the elevator feet by hand. Elevator buttons Elevator feet Setting Up (continued) 4&O 1.
9 Connecting Your Devices WARNING• Incorrect connecting could result in fire or electrical shock. Whenever attempting to connect other devices to the projector, please th\ oroughly read the Product Safety Guide, this manual and the manual of each device to\ be connected. CAUTION • TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to connect a live device to the projector may generate extrem\ ely loud noises or other abnormalities that may result in malfunction and/or dama\ ge to the device and/or projector. ATTENTION • Make sure that you connect devices to the correct port. Incorrect connection may result in malfunction and/or damage to the device and/or \ projector. Refer to the section “TECHNICAL” of this manual for the pin assign\ ment of connectors and RS-232C communication data. • Some cables have to be used with core set. Use the accessory cable \ or a designated-type cable for the connection. For cables that have a core on\ ly at one end, connect the core to the projector. • Secure the screws on the connectors and tighten. • Whenever attempting to connect a laptop computer to the projector, \ be sure to activate the laptop’s RGB external image output (set the laptop to C\ RT display or to simultaneous LCD and CRT display). For details on how this is done, ple\ ase refer to the instruction manual of the corresponding laptop computer. About Plug-and-Play Capability • This projector is compatible with VESA DDC 1/2B. Plug-and-Play can \ be achieved by connecting this projector to computers that are VESA DDC (display data \ channel) compatible. Please take advantage of this function by connecting the acc\ essory RGB cable to the rgbport (DDC 1/2B compatible). Plug-and-Play may not work properly if any other type of connection is attempted. • Plug-and-Play is a system composed of the computer, its operating s\ ystem and peripheral equipment (i.e. display devices). • Please use the standard drivers in your computer as this projector \ is a Plug-and-Play monitor. NOTE • Some computers may have multiple display screen modes. Use of some \ of these modes will not be possible with this projector. • For some RGB input modes, the optional Mac adapter is necessary. • When the image resolution is changed on a computer, depending on an\ input, automatic adjust function may take some time and may not be completed. I\ n this case, you may not be able to see a check box to select “Yes/No” for the \ new resolution on Windows. Then the resolution will go back to the original. It might be r\ ecommended to use other CRT or TFT monitors to change the resolution. NOTE Setting Up (continued) 4&O 1.
10 Please refer to the following for connecting your devices. See the rear of the projector. You can see the ports. L-audio-R video s-video audio Y component video CB/PBCR/PR rgbcontrol L-audio-R video s-video audio Y component video CB/PBCR/PR rgbcontrol L-audio-R video s-video audio Y component video CB/PBCR/PR rgbcontrol L-audio-R video s-video audio Y component video CB/PBCR/PR rgbcontrol L-audio-R video s-video audio Y component video CB/PBCR/PR rgbcontrol L-audio-R video s-video audio Y component video CB/PBCR/PR rgbcontrol Connecting to a computer RGB out RGB cable (D-sub 15 pin) Audio out Audio cable (Stereo mini) RS-232C port RS-232C cable Connecting to a DVD/VCR player Video out Audio out (L) Audio/Video cable Audio out (R) If using a SCART RGB input, Video AUDIO-L AUDIO-R SCART SCART cable G out port B R If using a S-video input, S-video out port S-video cable Audio out (L) Audio cable Audio out (R) If using a component input, Component (Y) out Component (C B/PB) out Component cable Component (C R/PR) out Audio out (L) Audio cable Audio out (R) If using a component input from rgb port, Component (Y) out Component (C B/PB) out Component cable Component (C R/PR) out (with D-sub 15 pin) Audio out Audio cable(Stereo mini) Setting Up (continued) 4&O 1.