3M Multimedia Projector H10 Operators Manual
Here you can view all the pages of manual 3M Multimedia Projector H10 Operators Manual. The 3M manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
21
Signal Searching
Selecting The Aspect Ratio
1Press the SEARCH button.Cycle through input signals, displaying the images of retrieved signals.\
If
no signal is found, returns to the signal that was selected before the s\
earch
was begun.
• May not function properly with some input signals.
• The signal searching function takes about 10 seconds to display an image\
.NOTE
• The temporarily blanking function will automatically finish if eith\
er the STANDBY/ON, SEARCH,
RGB, VIDEO, FREEZE, AUTO, VOLUME,...](http://img.usermanuals.tech/thumb/96/86990/w300_3m-h10-manual_d-20.png "Page 21
21
Signal Searching
Selecting The Aspect Ratio
1Press the SEARCH button.Cycle through input signals, displaying the images of retrieved signals.\
If
no signal is found, returns to the signal that was selected before the s\
earch
was begun.
• May not function properly with some input signals.
• The signal searching function takes about 10 seconds to display an image\
.NOTE
• The temporarily blanking function will automatically finish if eith\
er the STANDBY/ON, SEARCH,
RGB, VIDEO, FREEZE, AUTO, VOLUME,...")
21 Signal Searching Selecting The Aspect Ratio 1Press the SEARCH button.Cycle through input signals, displaying the images of retrieved signals.\ If no signal is found, returns to the signal that was selected before the s\ earch was begun. • May not function properly with some input signals. • The signal searching function takes about 10 seconds to display an image\ .NOTE • The temporarily blanking function will automatically finish if eith\ er the STANDBY/ON, SEARCH, RGB, VIDEO, FREEZE, AUTO, VOLUME,...
Page 22
![Page 22
22
This projector has the following menus: MAIN, PICTURE-1, PICTURE-2, INPU\
T, AUTO,
SCREEN, OPTION. Each of these menus is operated using the same methods. \
The basic
operations of these menus are as follows.
1Press the MENU
button.
The menu display
appears on the screen.
2Use the /
buttons to select
a menu , then
press the or
ENTER button.
The display of the
selected menu
appears.
3Use the /
buttons to select an item,
then press the or ENTER button.
The operation display of the selected item...](http://img.usermanuals.tech/thumb/96/86990/w300_3m-h10-manual_d-21.png "Page 22
22
This projector has the following menus: MAIN, PICTURE-1, PICTURE-2, INPU\
T, AUTO,
SCREEN, OPTION. Each of these menus is operated using the same methods. \
The basic
operations of these menus are as follows.
1Press the MENU
button.
The menu display
appears on the screen.
2Use the /
buttons to select
a menu , then
press the or
ENTER button.
The display of the
selected menu
appears.
3Use the /
buttons to select an item,
then press the or ENTER button.
The operation display of the selected item...")
22 This projector has the following menus: MAIN, PICTURE-1, PICTURE-2, INPU\ T, AUTO, SCREEN, OPTION. Each of these menus is operated using the same methods. \ The basic operations of these menus are as follows. 1Press the MENU button. The menu display appears on the screen. 2Use the / buttons to select a menu , then press the or ENTER button. The display of the selected menu appears. 3Use the / buttons to select an item, then press the or ENTER button. The operation display of the selected item...
Page 23
![Page 23
23
MAIN Menu
With the MAIN menu, the items shown in the table below can be
performed.
Perform each operation in accordance with the instructions in the
table below.
MENUMAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION KEYSTONE
BRIGHT
CONTRAST
ASPECT
WHISPER
MIRROR
LANGUAGE
[Language] +0
+0
+0
4:3
NORMAL
NORMAL
ENGLISH
: SELECT
ItemDescription
KEYSTONE
Adjust Brightness:
Light ñDark
Adjust the Keystone (Vertical) Distortion:
Upper in the data ñLower in the data
• The adjustable range of this function...](http://img.usermanuals.tech/thumb/96/86990/w300_3m-h10-manual_d-22.png "Page 23
23
MAIN Menu
With the MAIN menu, the items shown in the table below can be
performed.
Perform each operation in accordance with the instructions in the
table below.
MENUMAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION KEYSTONE
BRIGHT
CONTRAST
ASPECT
WHISPER
MIRROR
LANGUAGE
[Language] +0
+0
+0
4:3
NORMAL
NORMAL
ENGLISH
: SELECT
ItemDescription
KEYSTONE
Adjust Brightness:
Light ñDark
Adjust the Keystone (Vertical) Distortion:
Upper in the data ñLower in the data
• The adjustable range of this function...")
23 MAIN Menu With the MAIN menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. MENUMAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION KEYSTONE BRIGHT CONTRAST ASPECT WHISPER MIRROR LANGUAGE [Language] +0 +0 +0 4:3 NORMAL NORMAL ENGLISH : SELECT ItemDescription KEYSTONE Adjust Brightness: Light ñDark Adjust the Keystone (Vertical) Distortion: Upper in the data ñLower in the data • The adjustable range of this function...
Page 24
![Page 24
24
PICTURE - 1 Menu
With the PICTURE - 1 menu, the items shown in the Table below can be
performed.
Perform each operation in accordance with the instructions in the table \
below.
MENUMAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION GAMMA
COLOR BAL R
COLOR BAL G
COLOR BAL B
SHARPNESS
COLOR
TINT
MY MEMORY NORMAL
+0
+0
+0
+0
+0
+0
SAVE1
: SELECT
ItemDescription
GAMMASelect a Gamma Mode:
NORMAL
ñCINEMA ñDYNAMIC ñCUSTOM• Selecting the COSTOM and then pressing the or the ENTER button calls
the CUSTOM...](http://img.usermanuals.tech/thumb/96/86990/w300_3m-h10-manual_d-23.png "Page 24
24
PICTURE - 1 Menu
With the PICTURE - 1 menu, the items shown in the Table below can be
performed.
Perform each operation in accordance with the instructions in the table \
below.
MENUMAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION GAMMA
COLOR BAL R
COLOR BAL G
COLOR BAL B
SHARPNESS
COLOR
TINT
MY MEMORY NORMAL
+0
+0
+0
+0
+0
+0
SAVE1
: SELECT
ItemDescription
GAMMASelect a Gamma Mode:
NORMAL
ñCINEMA ñDYNAMIC ñCUSTOM• Selecting the COSTOM and then pressing the or the ENTER button calls
the CUSTOM...")
24 PICTURE - 1 Menu With the PICTURE - 1 menu, the items shown in the Table below can be performed. Perform each operation in accordance with the instructions in the table \ below. MENUMAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION GAMMA COLOR BAL R COLOR BAL G COLOR BAL B SHARPNESS COLOR TINT MY MEMORY NORMAL +0 +0 +0 +0 +0 +0 SAVE1 : SELECT ItemDescription GAMMASelect a Gamma Mode: NORMAL ñCINEMA ñDYNAMIC ñCUSTOM• Selecting the COSTOM and then pressing the or the ENTER button calls the CUSTOM...
Page 25
![Page 25
25
ItemDescription
MY MEMORY
Load/Save a Setting:
Selecting one from the following and then pressing the or the ENTER
button performs each function.
LOAD1ñLOAD2 ñLOAD3 ñLOAD4
ð SAVE1 ñSAVE2 ñSAVE3 ñSAVE4
• This projector has 4 memories called M1, M2, M3 and M4 for settings.
Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current setting dat\
a
on the memory whose number corresponds. Performing the LOAD1, LOAD2,
LOAD3 or LOAD4 calls the data of memory whose number corresponds, and
adjusts the...](http://img.usermanuals.tech/thumb/96/86990/w300_3m-h10-manual_d-24.png "Page 25
25
ItemDescription
MY MEMORY
Load/Save a Setting:
Selecting one from the following and then pressing the or the ENTER
button performs each function.
LOAD1ñLOAD2 ñLOAD3 ñLOAD4
ð SAVE1 ñSAVE2 ñSAVE3 ñSAVE4
• This projector has 4 memories called M1, M2, M3 and M4 for settings.
Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current setting dat\
a
on the memory whose number corresponds. Performing the LOAD1, LOAD2,
LOAD3 or LOAD4 calls the data of memory whose number corresponds, and
adjusts the...")
25 ItemDescription MY MEMORY Load/Save a Setting: Selecting one from the following and then pressing the or the ENTER button performs each function. LOAD1ñLOAD2 ñLOAD3 ñLOAD4 ð SAVE1 ñSAVE2 ñSAVE3 ñSAVE4 • This projector has 4 memories called M1, M2, M3 and M4 for settings. Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current setting dat\ a on the memory whose number corresponds. Performing the LOAD1, LOAD2, LOAD3 or LOAD4 calls the data of memory whose number corresponds, and adjusts the...
Page 26
26 PICTURE - 2 Menu With the PICTURE - 2 menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. MENUMAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION V POSITION H POSITION H PHASE H SIZE OVER SCAN RESET 20 142 31 1344 95 : SELECT ItemDescription V POSITION Adjust the Vertical Position: Up ñDown • This item can be selected only at a RGB input. H POSITIONAdjust the Horizontal Position: Left ñRight • This item can be...
Page 27
INPUT Menu With the INPUT menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. MENUMAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION COLOR SPACE COMPONENT VIDEO FRAME LOCK 3D-YCS VIDEO NR PROGRESSIVE INFORMATION AUTO COMPONENTAUTO TURN ON NORMAL LOW TURN OFF : SELECT 27 ItemDescription COLOR SPACE Select a Color Space Mode: AUTO ñRGB ñSMPTE240 ñREC709 ñREC601 • This item can be selected only at a RGB input or a...
Page 28
![Page 28
28
ItemDescription
VIDEO NR
Select a Noise Reduction Mode:HIGH ñMIDDLE ñLOW
• This function performs only at a VIDEO input or a S-VIDEO input. At a VI\
DEO input of NTSC 3.58, this function performs only when the TURN OFF is
selected under the 3D-YCS.
• When the HIGH, the MIDDLE or the LOW is selected, the noise on screen is\
reduced according to each mode.
• When this function is excessive, it may cause a certain degradation of t\
he picture.
PROGRESSIVE
Select the Progressive Mode: TV ñFILM...](http://img.usermanuals.tech/thumb/96/86990/w300_3m-h10-manual_d-27.png "Page 28
28
ItemDescription
VIDEO NR
Select a Noise Reduction Mode:HIGH ñMIDDLE ñLOW
• This function performs only at a VIDEO input or a S-VIDEO input. At a VI\
DEO input of NTSC 3.58, this function performs only when the TURN OFF is
selected under the 3D-YCS.
• When the HIGH, the MIDDLE or the LOW is selected, the noise on screen is\
reduced according to each mode.
• When this function is excessive, it may cause a certain degradation of t\
he picture.
PROGRESSIVE
Select the Progressive Mode: TV ñFILM...")
28 ItemDescription VIDEO NR Select a Noise Reduction Mode:HIGH ñMIDDLE ñLOW • This function performs only at a VIDEO input or a S-VIDEO input. At a VI\ DEO input of NTSC 3.58, this function performs only when the TURN OFF is selected under the 3D-YCS. • When the HIGH, the MIDDLE or the LOW is selected, the noise on screen is\ reduced according to each mode. • When this function is excessive, it may cause a certain degradation of t\ he picture. PROGRESSIVE Select the Progressive Mode: TV ñFILM...
Page 29
29 MENUMAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION ADJUST POWER OFF SEARCH RESET 0 min TURN ON : SELECT AUTO Menu With the AUTO menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. ItemDescription ADJUST Automatically Adjust the Picture: Pressing the or the ENTER button performs this function. At a RGB input: • V POSITION, H POSITION, H PHASE and HSIZE are automatically adjusted. Please use this function with the...
Page 30
30 SCREEN Menu With the SCREEN menu, the items shown in the table below can be performed. Perform each operation in accordance with the instructions in the table below. : SELECT MENUMAIN PICTURE-1 PICTURE-2 INPUT AUTO SCREEN OPTION BLANK START UP MENU POSITION MESSAGE RESET BLACK TURN ON TURN ON ItemDescription BLANK Select a Blank Screen Color: BLUEñWHITEñBLACK • The blank screen of selected color is displayed by pressing the BLANK button. Please refer to the section “Temporarily Blanking The Screen”\...