3M Advanced PipeCable Locator 2220M Operator Manual

							21
Specifications
Receiver
Locating ModesDual Peak w/Direction, Special (Single) Peak, Induction Peak, 
Depth & Current
Gain Adjustment Automatic with Manual override
Frequencies
Active
Passive Power
Passive LF
Passive CATV
Cathodic Protection
Auxiliary/Sonde (Receive only) 8 kHz, 82 kHz
50 Hz or 60 Hz
VLF 15 k – 30 kHz
31.5 kHz *
100 Hz or 120 Hz
512 Hz, 640 Hz, 33 kHz
Display Resolution 0.1 dB
Depth Display Range 0–30 ft (9 m)
Depth Units inch and cm
Depth Accuracy ** ± 2%  ± 3 in (5 cm) 0–60 in (1.5 m)
±  6%  ± 3 in (5 cm) 61–120 in (1.5 m–3 m)
±  10%  ± 3 in (5 cm) 121–180 in (3–4.5 m)
Cable Current Display 0.01 mA resolution
Units: mA
Battery type 8 AA size, Alkaline (LR6)
Typical Battery Life 30 hrs
Display Large Graphic high contrast LCD w/ backlight
Speaker 0.25 W
Headphone Jack Standard Mini Jack
Serial Port Standard RS232 serial w/DB9 connector
* American NTSC, television set on
**    Locators are tested in model field conditions with no adjacent signals. Actual operating conditions 
may result in decreased depth accuracy due to outside signal disruptions.
Transmitter: 3-Watt
Output Frequencies
Trace Mode
Induction mode 8 kHz, 82 kHz
82 kHz
Output voltage (max)
Trace 60 Vrms
Output Power Normal setting: 0.5 W
High setting: 3 W @ 8 kHz, 1 W @ 82 kHz
Output Protection 240 Vrms
Battery type 6 C size, Alkaline (LR14)
Typical Battery Life Normal output level: 45 hrs
High output level: 7 hrs 
						

							22
Transmitter: 12-Watt
Output Frequencies
Trace Mode
Induction mode8 kHz, 82 kHz
8 kHz, 82 kHz
Output voltage (max)
Trace 60 Vrms
Output Power, U-Model
(Direct Connection Method)
Output Power up to 12 Watts for the 12 Watt 
Transmitter is achieved using the supplied exter -
nal power source. 12 Watt Output Power varies 
by frequency, or is limited to 1 Watt at 82 kHz on 
the U-Model using direct connection method. Normal setting: 0.5 W
High setting: 3 W @ 8 kHz, 1 W @ 82 kHz
Max setting: 12W @ 8 kHz, 1 W @ 82 kHz
Output Power, E-Model      
(Direct Connection Method) Normal setting: 0.5 W
High setting: 3 W @ 8 kHz and 82 kHz
Max setting: 12 W @ 8 kHz and 82 kHz
Output Protection 240 Vrms
Battery type For Normal and High Output Power: 6 C size, Alkaline 
(LR14)
For Max Output Power: Rechargeable Battery, 12V-6AH, 
Sealed Maintenance-Free Lead (Pb)-Acid Battery  (See 
safety information below.)
Typical Battery Life Normal output level: 45 hrs
High output level: 7 hrs
Rechargeable battery will extend operation time by 40%.
Environmental
Operating Temperature–4° F to 122° F (–20° to 50° C)
Storage Temperature –4° F to 158° F (–20° to 70° C)
Standard IP54
Regulatory 3 Watt Transmitter is FCC and CE compliant
U-Model Transmitters meet FCC Part 15
12 Watt U-Model Transmitter is FCC compliant
12 Watt E-Model Transmitter is CE compliant
Physical Specification
Size (H x W x D) in (cm)Weight
Transmitter 6.75 x 11.25 x 7.75
(17.2 x 28.6 x 19.7) w/ alkaline batteries only : 5.2 lb (2.4 kg)
w/ rechargeable battery and alkaline batteries (12-
watt transmitter only) : 9.2 lb (4.2 kg)
Receiver 10.25 x 10.5 x 30
(26.7 x 26.1 x 76.2) 4.05 lb
(1.9 kg)
Shipping N/A 17 lb (7.7 kg) - standard units
21 lb (9.5 kg) - 12-watt transmitter units with 
rechargeable battery 
						

							23
Rechargeable Battery Information
UN2800 classification as "Batteries, wet, Non-Spillable, and electric storage" 
as a result of passing the Vibration and Pressure Differential Test described in 
DOT [49 CFR 173.159(d) and IATA/ICAO [Special Provision A67].
 CAUTION
To reduce the risks associated with environmental contamination and possible injury:
The 12W transmitter utilizes the 2200RB rechargeable battery for the Max Output power level. 
This is a maintenance-free sealed lead (Pb)-acid battery.
•	 Replace the battery if the acid solution leaks.
•	 The batteries are not serviceable.
•	 Do not disassemble batteries.
•	 Do not remove vent caps.
•	 Do not rest tools or cables on batteries.
•	 Store lead-acid batteries with adequate ventilation.
•	 Do not heat batteries above 140°F (60°C))
•	 Never recharge batteries in an unventilated, enclosed space.
•	 Spent batteries must be treated as hazardous waste. Dispose of batteries and electronic 
components in accordance with all regulations.
•	 Do not incinerate batteries.
•	 Always remove/disconnect batteries when not in use or storing for long periods of time.
Cleaning Instructions
Use a soft damp cloth to clean the product and test leads if necessary.
Locator Software Upgrades
Locator software upgrades are periodically released and can be downloaded, 
free of charge, at www.3M.com/dynatel. Located under the Software section, 
the 2220M-Series software is titled 2220M-Series Locator PC Tools x.x.x 
(EXE x.xMB) . Once downloaded to your PC, double click the file and an auto-
installer will install the PC Tool desktop software. Double click the Dynatel 
2220M Series PC Tool kit icon on the desktop. Using the provided RS232 cable, 
or RS232-to-USB adapter cable, connect the RS232 port on the locator to the 
PC and turn the locator on. Click the Upgrade Software button in PC Tools to 
begin upgrade. Do not disconnect, or turn off, the locator while the upgrade is in 
progress. Wait until the software indicates that the installation was successful. 
						

							3M and Dynatel are trademarks of 3M Company.
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information 
believed to be reliable, but the accuracy or completeness is not guaranteed.
 Before using this product, you must 
evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated 
with such use. Any statements related to the product which are not contained in 3M’s current publications, or 
any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed 
upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability. 
This product will be free from defects in material and manufacture for a period of one (1) year from the time 
of purchase.
 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED 
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective 
within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 
3M product or refund the purchase price of the 3M product.
 Except where prohibited by law, 3M will not 
be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M 
product, regardless of the legal theory asserted. 
3
Track and Trace Solutions6801 River Place Blvd.
Austin, TX 78726-9000
1-800-426-8688
www.3M.com/dynatel Please Recycle. Printed in USA.
© 3M 2009. All Rights Reserved.
78-9000-0021-3-C
This product is in accordance with the requirements 
of the European directive 99/5/EC.
This is the EU symbol f
or equipment that is covered 
under the W aste from Electr ical and Electronic 
Equipment (WEEE) directiv e per CENELEC 
Specification 5041.  It indicates that certain products 
should not be discarded in the trash,  but rather 
should be recycled.   This applies to all electronic 
pluggab le and batter y powered product s.
Statement of Conformity
"Hereby, 3M declares that this Underground Locating Product is in compliance 
with the essential requirements and other revelent provisions of Directive 
1999/5/EC."
www.3m.com/market/telecom/access/conformity/