3Com Router WL-602 User Manual

4
RUNNING THE SETUP WIZARD
Accessing the 
Router using the 
3Com Detect 
ApplicationThe 3Com Detect application works by automatically locating your 
Router, establishing what IP address it is using and then launching your 
default web browser to connect directly to it.
The application will only locate your Router if it is on the same subnet as 
the PC on which the application is running. It will not be able to locate 
your Router if there is another router between your PC and the Router. 
Note that the...

30CHAPTER 4: RUNNING THE SETUP WIZARD
Figure 11   3Com Detect Application
If the computer has multiple network adapters, select the adapter that 
connects the computer to the network or the Router, click Next. 
You will then be offered the choice of searching the same subnet that 
your PC is on for a connected Router (default), or specifying an IP range. 
Note that specifying a large range may take some time for the search to 
complete. (see Figure 12 and Figure 13) 
Figure 12   Discovery Screen - search...

Accessing the Setup Wizard31
Figure 14   Router List Screen
Accessing the Setup 
WizardThe Router setup program is Web-based, which means that it is accessed 
through your Web browser (Netscape Navigator 4.7 or higher, Internet 
Explorer 6.0 or higher, Mozilla 1.2.1 or higher, or Apple’s Safari). 
To use the Setup Wizard:
1Ensure that you have at least one computer connected to the Router. 
Refer to Chapter 2 for details on how to do this.
2Launch your Web browser on the computer. 
3Enter the following...

32CHAPTER 4: RUNNING THE SETUP WIZARD
4To log in as an administrator, enter the password (the default password is 
admin) in the System Password field and click Log in (see Figure 16). 
Figure 16   Router Login Screen
5When you have logged in, 
■if you are logging in for the first time, the Country Selection screen 
will appear (see Figure 17). Please select the country form the 
drop-down menu, and click Apply. 
1. To comply with US FCC regulations, operation for any country is limited 
to channels from...

Accessing the Setup Wizard33
The Wizard will then launch automatically (refer to Figure 20). You will be 
guided step by step through a basic setup procedure.
■if the Router has been configured previously, the Welcome screen will 
appear (Figure 18). There are three tabs: Notice Board, Password and 
Wizard. 
Figure 18   Welcome Screen
■Go to the Notice Board tab to see the current software information. To 
view the Web help, click the Help button.
■Go to the Password tab to change the password (Figure...

34CHAPTER 4: RUNNING THE SETUP WIZARD
The password screen allows you to change the current password and set 
the login time limit to the Router’s management interface.
Figure 19   Password Screen
1To change the current password, enter the password in the Current 
Password field. 
2Enter the new password in the New Password field, and enter it again in 
the Confirm New Password field. 
3Enter the time period in Login Timeout to set a maximum period of time 
for which the login session is maintained during...

Accessing the Setup Wizard35
Figure 20   Change Password Screen
Wizard -
Time and Time ZoneThe Time and Time Zone screen allows you to set up the time for the 
Router.
Figure 21   Time and Time Zone Screen
1Select the correct base date and time. 
2If you want to automatically synchronize the Router with a public time 
server, check the Enable box in the Using Time Server (NTP) field.
3Select the time zone in the Set Time Zone drop-down menu.
4Enter the time in the Synchronization Interval field. 
5Select...

36CHAPTER 4: RUNNING THE SETUP WIZARD
Wizard -
Connection TypeThe Connection Type screen allows you to set up the Router for the type 
of Internet connection you have. Before setting up your connection type, 
have your account information from your ISP ready.
Figure 22   Connection Type Screen 
Select a mode from the following:
■Dynamic IP — Using DHCP function, see page 37
■Static IP — Using fixed IP, see page 38
■PPPoE — PPP over Ethernet, providing routing for multiple PCs, see 
page 39
■PPTP —...

Accessing the Setup Wizard37
Dynamic IP
This mode is often used in cable connection when the ISP assigns IP 
address via DHCP. To set up the Router for use with a dynamic IP 
connection, use the following procedure:
Figure 23   Host Name Screen
1Host name is a name that some Internet Service Providers require for 
connection to their system. This entry is optional, your Internet Service 
Provider should provide this information. 
2Check all of your settings, and then click Next. 
The LAN Settings screen...

38CHAPTER 4: RUNNING THE SETUP WIZARD
Static IP
Use this option when you have a static IP assigned by your service 
provider. To set up the Router for use with a static IP connection, use the 
following procedure:
Figure 24   Static IP Screen 
To assign a fixed IP address:
1Enter your Internet IP address in the IP address assigned by your Service 
Provider field. 
2Enter the subnet mask in the Subnet Mask field.
3Enter the default gateway IP address in the Service Provider Gateway 
Address field.
4Enter...