DATA SHEET 1118
ALTEK
Quik-touch™ 1118
PRESSURE CALIBRATOR
The Altek Quik-touch 1118 Pressure Calibrator is a precision
electronic instrument to accurately measure and display pressure in
all popular engineering units. In addition, the hand-held unit tests
and calibrates pressure switches.
Top-mounted NPT fittings allow simple installation to all common
process connections. Easily replaceable AA alkaline batteries provide
extended service life. Selectable engineering units replace a variety of gauges....
RTD Calibrator
Model 211
• 8 RTD types & ohmsSelect Pt, Cu, or Ni
• Temperature input & outputDirectly in degrees
• 0.025% accuracyAccurate to 0.25°F or 0.15°C
• 1° or 0.1° resolutionField Selectable °F or °C
• Quik-Chek™ switchInstantly recall three outputs; HI, LO & SetAltek’s Model 211 RTD Calibrator lets you simulate
and read RTDs over the entire industrial temperature
range. Use with transmitters, single & dual channel
recorders, controllers, alarms and indicators. Switch
between four Pt 100, one...
Thermcouple Source
Model 22
• Direct temperature output22 precise steps
• 0.1% accuracy25, 50, or 100 degree resolution
• Rugged designField, shop and control room use
• Pocket sized1 year battery life
• Models for types B, E, J, K, R, S, T°C & °F cold-junction compensatedAltek Model 22 Thermocouple Sources provide 22
precise temperatures for inputs to transmitters,
recorders, controllers, alarms, data acquisition and
computer systems. The Model 22 provides
thermocouple wire output and is cold-junction...
Thermocouple Calibrator
Model 222A
• Select one of 10 T/C types plus mVJ, K, T, E, R, S, B, N, C, L & mV
• Temperature input & outputReads directly in degrees
• Quik-Chek™ switchInstantly recall three outputs; HI, LO & Set
• Multi-speed digital potFast, accurate setting
• Accuracy ±(0.008% of reading+0.006 mV)Typical accuracy of 0.4°C or 0.7°F
Field selectable 0.1° or 1µV resolutionCalibrate thermocouple instruments
Source and read T/C’s over the entire industrial tem-
perature range with Altek’s Model...
Process Voltage Analyzer
Model 235
• Calibrate voltage instrumentsSimulate Inputs
Check Outputs
• Three ranges with 0.05% accuracy0.0 to 199.9 Millivolts
0.00 to 19.99 Volts
-25.0 to 199.9% of 1 to 5 Volts
• Calibrate live voltage input receiversNo need to disconnect loop
• “Quik-Chek®” switchSet HI & LO outputs to match your Span & Zero
Instantly switch between HI & LO outputs
• Automatic overload protectionWithstands 120V AC or DC without fusesCalibrate and check out all your DC voltage
instrumentation...
GENERAL INFORMATION
ALTEK
UNIVERSAL RTD CALIBRATOR
MODEL 311
Simulate & Read RTDs
Altek’s Model 311 RTD Calibrator lets you
SIMULATE and READ RTD’s over the entire
industrial temperature range. Use with transmitters,
recorders controllers, alarms, indicators, data
acquisition and computer systems. Switch between
four platinum 100 ranges, one platinum 200 range,
one platinum 500 range and two platinum 1000
ranges. The Model 311 also has ranges for copper
and Nickel and can be supplied with custom RTD...
Universal RTD Calibrator
Model 311A
• Simulate RTDS into smart transmittersWorks with a wide variety of models including
Rosemount 3144 & Honeywell STT series
• Universal compatability with process
instruments
Operates with devices that use pulsed excitation
currents including PLCs, DCS and multi-channel
recorders
• Calibrate in °C & °F for your RTD typePlatinum 100Ω, copper 10Ωand 50Ω, nickel 110
and 120Ω
Simulate from 0.00 to 500.00 ohms
• Calibrate with laboratory accuracy±(0.01% of reading + 0.075...
Universal RTD Calibrator
Model 311A-KP
• Simulate RTDS into smart transmittersWorks with a wide variety of models including
Rosemount 3144 & Honeywell STT series
• Universal compatability with process
instruments
Operates with devices that use pulsed excitation
currents including PLCs, DCS and multi-channel
recorders
• Calibrate in °C & °F for your RTD typePlatinum 100Ω, copper 10Ωand 50Ω, nickel 110
and 120Ω
Simulate from 0.00 to 500.00 ohms
• Calibrate with laboratory accuracy±(0.01% of reading + 0.075...
Multiple
Thermocouple Calibrator
Model 322-1
• 4 T/C type plus mVJ, K, T, E & mV
• Temperature input & outputReads directly in degrees
• Quik-Chek™ switchInstantly recall three outputs; HI, LO & Set
• 15 output memoriesThree for each T/C type & mV
• Accuracy ±(0.008% of reading+0.006 mV)Typical accuracy of 0.3°C or 0.5°F
Field selectable 0.1° or 1µV resolutionCalibrate thermocouple instruments
Source and read T/C’s over the entire industrial tem-
perature range with Altek’s Model 322 Thermocouple...
Frequency Source
Model 40A
• Frequency output40 precise steps 0.5 Hz to 60 KHz
• Tuning fork crystal0.0008% accuracy
• Laboratory stability±0.001% per deg C
• Zero based & zero crossing square waveSwitch selected outputs
• Pocket sized
Altek Model 40A Frequency Source provides 40
precise frequencies from 0.5 to 60,000 Hertz. Output
is a square wave* of 15 volt peak-to-peak amplitude
which can be set to any lower value with a built-in
attenuator. A switch selects zero based or zero center
outputs for...
Universal Thermocouple
Calibrator
Model 422
• 14 T/C type plus mVJ, K, T, E, R, S, B, N, G, C, D, P, L, U & mV
• Temperature input & outputReads directly in degrees
• Quik-Chek™ switchInstantly recall three outputs; HI, LO & Set
• 45 output memoriesThree for each T/C type & mV
• Accuracy ±(0.008% of Reading+0.006 mV)Typical accuracy of 0.4°C or 0.7°F
Field selectable 0.1° or 1µV resolutionCalibrate thermocouple instruments
Source and read T/C’s over the entire industrial tem-
perature range with...
Model 610
Digital Pressure Gauge
The Altek Model 610 Digital Pressure Gauge is a precision electronic instrument
designed to accurately and reliably measure and display pressure in all popular
engineering units.
The Model 610 was engineered for the real world. The 300 Series stainless steel
body is designed to survive harsh process environments. An isolated sensor ensures
• Built for harsh process environments
• Selectable units: psi, KPa, Bar, mBar, mm Hg,
inches Hg, mm H
2O, inches H2O, kgF/cm2
•...
ALTEK DATA SHEET
ALTEK INDUSTRIES CORP
35 Vantage Point Drive Rochester, New York 14624 U.S.A.
(716) 349-3500 • Fax: (716) 349-3510
E-Mail: [email protected] • http://www.altekcalibrators.com
A TRANSMATION COMPANY
SPECIFICATIONS
GENERAL DESCRIPTION
628
See Data Sheet 620 for Pressure Indicator
PRECISION PRESSURE PUMP
MODEL 628
Pressure connections are made through two 1/8 NPT
internally threaded fittings. Compatible media are any
non-conductive, non-corrosive, instrument-grade clean
air...
GENERAL DESCRIPTION
PRECISION HIGH-PRESSURE PUMP
DATA SHEET 638:
See Data Sheets 628 for Low Pressure Pump & 620 for Pressure Indicators
ALTEK
MODEL 638
with psig, inches of water or kg/cm2 ranges.
Dual output ports allow simultaneous pressure
application to two devices. For example, connect
one port to the Model 620—providing digital veri-
fication of the generated pressure—and the sec-
ond port to the device being checked or calibrated.
Pressure connections are made through two
1/4
NPT internally...
