Home > Altek > Calibrator > Altek Model 1118 QuikTouch PressureCalibrator Data Sheet User Manual

Altek Model 1118 QuikTouch PressureCalibrator Data Sheet User Manual

Add to Favourites
    Download as PDF

    View the Altek Model 1118 QuikTouch PressureCalibrator Data Sheet User Manual for free. All the Altek manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 DATA SHEET 1118 ALTEK Quik-touch™ 1118 PRESSURE CALIBRATOR The Altek Quik-touch 1118 Pressure Calibrator is a precision electronic instrument to accurately measure and display pressure in all popular engineering units. In addition, the hand-held unit tests and calibrates pressure switches. Top-mounted NPT fittings allow simple installation to all common process connections. Easily replaceable AA alkaline batteries provide extended service life. Selectable engineering units replace a variety of gauges....
    Page 2 OPERATING INSTRUCTIONS ALTEK INDUSTRIES CORP Rochester, NY 14624 USA Connections Operating Modes The Quik-touch 1118 features two operating modes: Pressure Measurement mode:In this mode, pressure is measured and displayed. This is the default mode when the calibrator is turned on unless another mode is specified. Setup mode:This mode is enabled by pressing and holding the Resetkey while turning on the calibrator. Release the Resetkey when AUTOappears on the display. To exit the Setup mode and return...
    Page 3 OPERATING INSTRUCTIONS ALTEK INDUSTRIES CORP Rochester, NY 14624 USA Replacing the Batteries Display The five-digit liquid crystal display indicates the pressure value, various operating legends, and error messages. In Pressure Measurement mode, the measured pressure value and the selected engineering units will be displayed. When in Setup mode, SETUP will be displayed. When an error condition is detected, a fault legend will be displayed. BATTERY will be displayed if the battery voltage is low. OVR...
    Page 4 SPECIFICATIONS (Unless otherwise indicated, specifications are reffered to an ambient temperature of 23°C ±1°C (72°F ±2°F) © October 1998 Altek Industries Corp Rochester, NY 14624 USA 100865-901 REV:A ADDITIONAL INFORMATION Three Year Warranty Our equipment is guaranteed against defective material and workmanship when pressure and pressure media limits have been observed (excluding batteries) for a period of one year from date of shipment. Claims under guarantee can be made by returning the equipment...
    Start reading Altek Model 1118 QuikTouch PressureCalibrator Data Sheet User Manual

    Related Manuals for Altek Model 1118 QuikTouch PressureCalibrator Data Sheet User Manual

    All Altek manuals