Home > Altek > Calibrator > Altek Model 3221 Four Type Multiple Thermocouple Calibrator Manual

Altek Model 3221 Four Type Multiple Thermocouple Calibrator Manual

Add to Favourites
    Download as PDF

    View the Altek Model 3221 Four Type Multiple Thermocouple Calibrator Manual for free. All the Altek manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 Multiple Thermocouple Calibrator Model 322-1 • 4 T/C type plus mVJ, K, T, E & mV • Temperature input & outputReads directly in degrees • Quik-Chek™ switchInstantly recall three outputs; HI, LO & Set • 15 output memoriesThree for each T/C type & mV • Accuracy ±(0.008% of reading+0.006 mV)Typical accuracy of 0.3°C or 0.5°F Field selectable 0.1° or 1µV resolutionCalibrate thermocouple instruments Source and read T/C’s over the entire industrial tem- perature range with Altek’s Model 322 Thermocouple...
    Page 2 General instructions Setting operating mode Turn-onEach time the Model 322 is turned on, the LCD will display all segments for about 1 second. It then dis- plays the currently selected thermocouple type for approximately 3 seconds. The currently selected temperature scale of °C or °F will then display for about 3 seconds. Depending on the configuration, from 1 to 4 T/C types, millivolts or °C or °F may be selected during the thermocouple turn-on mode. 1) Move the power switch to SOURCE or READ 2) All...
    Page 3 Simulate a thermocouple Source1) Set up the Model 322 for the correct T/C type and temperature scale (°C or °F). 2) Disconnect the input wires from the device to be calibrated or checked. 3) Connect the Model 322 to the device to be calibrated, being careful to observe proper polarity and T/C type 4) Adjust the digital pot to the desired output value. OutputWhenever SOURCE mode is selected the word SOURCE will appear on the LCD. To change the output value, turn the speed sensitive digital pot. Turning...
    Page 4 PN 1887730 Rev A April 2002 ©2002 Altek Industries, Inc. Specifications subject to change without notice. All rights reserved. Printed in U.S.A. Altek products are warranted to be free from defects in material and workmanship (excluding fuses, batteries and leads) for a period of three years from the date of shipment. Warranty repairs can be obtained by returning the equipment prepaid to our factory. Products will be replaced, repaired, or adjusted at our option. Altek gives no other warranties,...
    Start reading Altek Model 3221 Four Type Multiple Thermocouple Calibrator Manual

    Related Manuals for Altek Model 3221 Four Type Multiple Thermocouple Calibrator Manual

    All Altek manuals