ZyXEL Router Prestige 334 User Manual

Prestige 334 User’s Guide
Chapter 11 Firewall130
• Configuring WA N or LAN & WAN access for services in the Remote Management 
screens or SMT menus. When you allow remote management from the WAN, you are 
actually configuring WAN-to-WAN/Prestige firewall rules. WAN-to-WAN/Prestige 
firewall rules are Internet to the Prestige WAN interface firewall rules. The default is to 
block all such traffic. When you decide what WAN-to-LAN packets to log, you are in 
fact deciding what WAN-to-LAN and...

Prestige 334 User’s Guide
131Chapter 11 Firewall
Figure 46   Firewall: Service
The following table describes the labels in this screen. 
Table 36   Firewall: Service
LABELDESCRIPTION
Enable Services 
BlockingSelect this check box to enable this feature.
Available ServiceThis is a list of pre-defined services (ports) you may prohibit your LAN 
computers from using. Select the port you want to block using the drop-down list 
and click Add to add the port to the Blocked Service field.
Blocked ServiceThis is...

Prestige 334 User’s Guide
Chapter 11 Firewall132
Clear AllClick Clear All to empty the Blocked Service.
Day to Block:Select a check box to configure which days of the week (or everyday) you want 
the content filtering to be active. 
Time of Day to Block 
(24-Hour Format)Select the time of day you want service blocking to take effect. Configure 
blocking to take effect all day by selecting the All Day check box. You can also 
configure specific times that by entering the start time in the Start (hr) and...

Prestige 334 User’s Guide
133Chapter 11 Firewall 

Prestige 334 User’s Guide
Chapter 12 Content Filtering134
CHAPTER12
Content Filtering
This chapter provides a brief overview of content filtering using the embedded WebGUI.
12.1  Introduction to Content Filtering
Internet content filtering allows you to create and enforce Internet access policies tailored to 
their needs. Content filtering is the ability to block certain web features or specific URL 
keywords and should not be confused with packet filtering via SMT menu 21.1. To access 
these functions,...

Prestige 334 User’s Guide
135Chapter 12 Content Filtering
Figure 47   Content Filter
The following table describes the labels in this screen.
Table 37   Content Filter
LABELDESCRIPTION
Restrict Web 
FeaturesSelect the box(es) to restrict a feature. When you download a page containing a 
restricted feature, that part of the web page will appear blank or grayed out.
ActiveX A tool for building dynamic and active Web pages and distributed object 
applications. When you visit an ActiveX Web site, ActiveX...

Prestige 334 User’s Guide
Chapter 12 Content Filtering136
KeywordType a keyword in this field. You may use any character (up to 64 characters). 
Wildcards are not allowed. You can also enter a numerical IP address.
Keyword ListThis list displays the keywords already added. 
Add Click Add after you have typed a keyword. 
Repeat this procedure to add other keywords. Up to 64 keywords are allowed.
When you try to access a web page containing a keyword, you will get a message 
telling you that the content...

Prestige 334 User’s Guide
137Chapter 12 Content Filtering 

Prestige 334 User’s Guide
Chapter 13 Remote Management Screens 138
CHAPTER13
Remote Management Screens
This chapter provides information on the Remote Management screens. 
13.1  Remote Management Overview
Remote management allows you to determine which services/protocols can access which 
Prestige interface (if any) from which computers.
You may manage your Prestige from a remote location via:
To disable remote management of a service, select Disable in the corresponding Server 
Access field.
You may...

Prestige 334 User’s Guide
139 Chapter 13 Remote Management Screens
2You have disabled that service in one of the remote management screens.
3The IP address in the Secured Client IP field does not match the client IP address. If it 
does not match, the Prestige will disconnect the session immediately.
4There is already another remote management session with an equal or higher priority 
running. You may only have one remote management session running at one time.
5There is a firewall rule that blocks it....