Zanussi Zws 2125 W User Manual
Here you can view all the pages of manual Zanussi Zws 2125 W User Manual. The Zanussi manuals for Washing Machine are available online for free. You can easily download all the documents as PDF.
Page 21
SECTION 7:PRACTICAL INFORMATION Alcoholic beverages: The stain point, should first be washed with cold water, than should be wiped with glycerine and water and be rinsed with water mixed with vinegar. Shoe Polish: The stain should be slightly scratched without ruining the cloth, rubbed with detergent and rinsed. In case it is not eliminated, it should be rubbed with 1 unit of pure alcohol (96 degrees) mixed in 2 units...
Page 22
Mould : Mould stains should be cleaned as soon as possible. The stain should be washed with detergent, and if it does not disappear, it should be wiped with oxygenated water (in proportion of 3%). Ink: Hold the stained area under cold water and wait until the inky water completely runs off. Then rub with water diluted with lemon juice and detergent, wash after waiting for 5 minutes. Fruit: Stretch...
Page 23
FAILURE PROBABLE CAUSE METHODS OF ELIMINATION Insert the plug into the socket. It is unplugged. Your fuse is defected. Change your fuse. The electric power is off. Check the electric power. Start/pause button has not been pressed. Press the start/pause button. The program knob is in O(off) status. Bring the program knob on the desired status. Your machine does not...
Page 24
FAILURE PROBABLE CAUSE METHODS OF ELIMINATION There is a small amount of clothes in the device. It does not prevent operation of the machine. Do not exceed the recommended quantity of clothes and spread your clothes in the machine in a well- balanced manner. Excessive amount of clothes are filled in the machine or the clothes are not placed in a well-balanced manner....
Page 25
FAILURE PROBABLE CAUSE METHODS OF ELIMINATION Clothes exceeding the maximum capacity has been filled in your machine. Put the clothes in your machine in a manner not to exceed its maximum capacity. Use the amount of detergent according to the declaration of the detergent producer. Your water may be hard. The washing result is not good. Distribution of the clothes...
Page 26
FAILURE PROBABLE CAUSE METHODS OF ELIMINATION The unbalanced load control system will try to distribute your clothes in a homogenous manner. After your clothes are distributed, passage to spining process will be realized.In the next washing process,place your clothes into the machine in a well- balanced manner. No failure. The unbalanced load control may works in that...
Page 27
FAILURE CODE FAILURE INDICATOR PROBABLE FAILURE THE PROCESS TO BE DONE Turn on the tap to the end.Water may be cut, check it.If the problem is still continuing,your machine will automatically stop after a while.Unplug your machine, turn off the tap and apply to the nearest authorized service. The water level in your machine is below heater. The pressure of your water supply may be low or locking. The program ready light blinks. Err 02...
Page 28
FAILURE CODE FAILURE INDICATOR PROBABLE FAILURE THE PROCESS TO BE DONE Shut down your machine and unplug. Turn off your tap and apply to the nearest authorized service. The heater of your machine or the heat sensor has failed. The start/pause light and program end light blink. Err 05 Shut down your machine and unplug. Turn off the tap and apply to the nearest authorized service. The program ready light and program end light blink. The motor has failed....
Page 29
SECTION 10: INTERNATIONAL WASHING SIGNS Washing temparature. Do not wash (hand wash) Lukewarm iron. Medium hot iron. Do not tumble dry. Hot iron. Do not iron. Hang to dry. Drip dry. Dry flat. Do not bleach. Handy to bleach. All of these are dry cleaning symbols. The letters are to instruct the cleaner what type of solvent to...