Zanussi Zws 2125 W User Manual

 
 
 
 
 
 
 
 
  
 
  
 
   
   
 
 
   
 
  
  
 
  
 
  
 
  
 
WASHING MACHINE USER MANUAL  
 
 
 
 
  
 
ZWS2125W  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
THE CONTENTS   
 
SECTION 1:BEFORE USING   
  • Safety warnings 
  • Recommendations 
 
SECTION 2:INSTALLATION    •  Removal of transportation screws 
  •  Adjustment of feet 
  • Electrical connection 
  •  Water supply connection 
 
•  Water drain connection 
 
SECTION 3:TECHNICAL SPECIFICATIONS  SECTION 4:CONTROL PANEL  
• Start/Pause button 
 
•  Function indicator lights 
 
• Function buttons 
 
•  Spin speed selector 
 
  • Program knob 
 
SECTION 5:WASHING YOUR LAUNDRY 
  •  Before...

 
 
 
 
 
 
 
  
 
SECTION 1:BEFORE USING    
   
 
SAFETY WARNINGS    
  •  Do not use a multiple socket or extension cord. 
  •  Do not insert a plug with damaged or broken cord into the socket.  
 
•  If the cord is damaged it should be replaced by the manufacturer or 
appointed service agent in order to avoid a hazard. 
 
 
•  Never remove the plug from the socket by pulling from the cord 
section. Remove the plug by holding. 
 
 
•  Do not plug the power supply with wet hands. 
 
•  Never touch the...

 
 
 
 
 
 
 
 
•  If you will not use your machine for a long time, unplug your machine, 
close the water supply and leave the door open in order to keep the 
inside of the machine dry and for prevention from unpleasant odour. 
 
 
 
 
•  As a result of the quality control procedures, a certain amount of 
water may remain in your machine. This is not harmful for your 
machine. 
 
 
 
SECTION 2: INSTALLATION   
You must pay attention to the following issues before using your washing 
machine....

 
 
 
 
 
 
 
 
 
 •  You can adjust the balance of your machine from its feet. 
  •  First, loosen the plastic adjustment nut. 
  •  Adjust by rotating the feet upwards or downwards. 
  •  After the balance has been reached,  tighten the plastic adjustment 
nut again by rotating it upwards. 
 
 
•  Never put cartons, wooden blocks or similar materials under  the 
machine to balance the irregularities on the level of the ground. 
 
 
        
 
 
  
 
 
  
  
   
   
   
   
 
ELECTRICAL CONNECTION   •...

 
 
 
 
 
 
 •  Water pressure of 1-10 bars from your tap will enable your machine 
to work more efficiently.(1 bar pressure means water flow of more 
than 8 liters in 1 minute from a fully opened tap). 
 
 
 
•  After connections are completed, check for the non-leakage of the 
connection joints by turning on your tap completely. 
 
 
•  Be sure that water inlet hoses are not folded, broken or crushed. 
  •  Mount the water inlet hoses to a 3”/4, geared water tap.      
   
  Cold water inlet (White...

 
 
 
 
 
 
SECTION 3:TECHNICAL SPECIFICATIONS  
  
 
  ZWS2125W 
 Maximum dry laundry capacity (kg) 5  Recommended loading (kg) 4,5  Height (cm)  85  Width (cm) 59,6  
 Depth (cm)  44 Maximum spin cycle ( rpm ) 1200  
(*) Maximum spin cycles depend on the model you’ve chosen  
 
  
 
 
                         1         2               3...

 
 
 
 
 
 
SECTION 4:CONTROL PANEL  
  
                  1         2             3                   4      5        6 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
 
 
 
     
 
 
 
 
 
 
                        7         8                               9 
 
      1-Detergent drawer      6-Program knob   2-Start/pause light    7-Start/pause button    3-Function indicator lights     8-Function buttons 
  4-Spin speed selector        9-Program end light                        
   5-Program ready light...

 
 
 
 
   START/PAUSE BUTTON                    Used to start a selected program or pause during running. 
 
                           
 
 
 
                        
WARNING!   
                  It is required for the program knob to be brought to O(off)    
       position before selecting the program or changing a continuing 
       program. 
 
 
 
FUNCTION INDICATOR LIGHTS  
       When the start/pause button or  any function button is pressed,the 
       corresponding light turns on.Th e light...

 
 
 
 
 
 
 
       If you do not want your sensitive clothes to be spinned or you   
       want them to be spinned sensitively, turn the program knob  to O 
       (off) position. Bring the program knob on one of the draining or 
       spinning programs you desire and press the start/pause        
       button. If the program you ha ve selected is a drain program, your 
       machine will draining the water inside.If you have selected a     
       spinning program, your ma chine will perform a...