Zanussi Zwq 6120 User Manual

ENUser manual 2
FRNotice d'utilisation 14
Lave-linge
ZWQ 6100
ZWQ 6120
 

Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _  2
Product description _ _ _ _ _ _ _ _ _ _ _ _ _  3
Personalisation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4
How to run a wash cycle? _ _ _ _ _ _ _ _ _ _  5
Daily Use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  5
Programmes table _ _ _ _ _ _ _ _ _ _ _ _ _ _  7
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _  8Operating Problems _ _ _ _ _ _ _ _ _ _ _ _ _  9
Detergents and Additives _ _ _ _ _ _ _ _ _ _  10
Technical Specifications _ _ _ _ _ _ _ _ _ _  10...

This way, the water remaining in the hoses will
be drained away, avoiding any ice formation
which would damage your appliance.
Before turning your appliance on again, ensure
that it is installed in an area where the tempera-
ture will not fall below freezing.
Use
• Your appliance is intended for normal do-
mestic use. Do not use the appliance for
commercial or industrial purposes or for any
other purpose.
• Refer to the instructions on the label of each
item before washing.
• Do not put items into the...

The control panel
123456
1. Programme selector
2. Buttons and their functions
3. Display4. "Door locked" light
5. "Start/Pause" button
6. "Delay start" button
Dispenser box
 Prewash
 Wash
 Softener (do not fill above the MAX
symbol 
M )
Personalisation
Child safety
This option provides two types of locking :
• if the option is activated after the cycle has
started, no changes to the options or pro-
gramme is possible.
The cycle runs and you must deactivate the
option to run a new...

How to run a wash cycle?
Using for the first time
• Ensure the electrical and water connec-
tions comply with the installation in-
structions.• Remove the polystyrene insert and all
other items inside the drum.
• Run an initial wash cycle at 90°C, with-
out any washing but with detergent to
clean the water tank.
Daily Use
Loading washing
• Open the lid of the
appliance.
• Open the drum by
depressing the
locking button A:
The two shutters
unlock automati-
cally.
•Load the washing,
close the drum and the...

“Easy iron” option 
If you select this option, the laundry is washed
and spun delicately to prevent any creasing.
This makes ironing easier.
“Extra rinse” option 
The washing machine will add one or more rin-
ses during the cycle. This option is recommen-
ded for people with sensitive skin and in soft
water areas.
Temporary : Press the “Extra rinse” 
 button.
The option is only active for the selected pro-
gramme.
Permanent : Hold down the “Eco” 
 and “Ex-
tra rinse” 
 buttons for a few seconds. The...

Programmes table
Programme / Type of washingLoadAvailable options
 Cottons1) (30° - 90°) : White or colour, e.g.
normally soiled work clothes, bed linen, table lin-
en, body linen, towels.5,5 kgRinse hold, Prewash, Quick2), Eco3),
Easy iron, Extra rinse, Delay start
 Synthetics (30° - 60°) : Synthetic fabrics,
body linen, coloured fabrics, non-iron shirts, blou-
ses.2,5 kgRinse hold, Prewash, Quick2), Eco3),
Easy iron, Extra rinse, Delay start
 Delicates (30° - 40°) : For all delicate mate-
rials, for...

Care and cleaning
Unplug the appliance before cleaning.
Descaling the appliance
To descale the appliance, use an appropriate
non-corrosive product designed for washing
machines. Read product label for recommen-
ded amounts and how often descaling should
be carried out.
The exterior
Use warm soapy water to clean the exterior of
the appliance. Never use alcohol, solvents or
similar products.
Dispenser box
To clean, proceed as follows :
1
2
 
4 3
Drain filter
Regularly clean the drain filter which is...

Operating Problems
Numerous checks were carried out on your ap-
pliance before it left the factory. However,
should you notice a malfunction, please refer tothe sections below before contacting the after-
sales service.
ProblemsCauses
The appliance doesn’t start
or doesn’t fill :• the appliance isn’t plugged in correctly, the electrical installation isn’t work-
ing, there is a power failure,
• the lid of your appliance and the drum shutters aren’t closed firmly,
• the programme start command hasn’t been...

ProblemsCauses
The appliance stops during
a wash cycle :• the water or electricity supply is defective,
• a “Rinse hold” option has been selected,
• the drum shutters are open.
The lid doesn’t open at the
end of the cycle :• the temperature inside the drum is too high,
• the lid unlocks 1 - 2 minutes after the end of the cycle.
The  error code ap-
pears in the display1) and
the “Start/Pause” button
flashes red 
2) :
• the lid is not closed properly.
The  error code ap-
pears in the display1) and
the...