Zanussi Zwh 7120 P User Manual

Programme - Maximum and Minimum Temperature -
Cycle Description - Maximum Spin Speed - Maximum
Fabrics Load - Type of LaundryOptionsDetergent
Compartment
SYNTHETICS
60° - Cold
Main wash - Rinses - Maximum spin speed at: 1200 rpm for
model ZWH 7120 P; 900 rpm for model ZWH 7140 P and
for model ZWH 7160 P
Max. load 3,5 kg - Reduced load 2 kg
Synthetic or mixed fabrics: underwear, coloured garments,
non-shrink shirts, blouses . Normally soiled items.
SPIN REDUCTION
RINSE HOLD
SUPER QUICK 
1)
EXTRA RINSE...

Programme - Maximum and Minimum Temperature -
Cycle Description - Maximum Spin Speed - Maximum
Fabrics Load - Type of LaundryOptionsDetergent
Compartment
DRAIN
Draining of water
For emptying out the water left in the drum in the programmes
with Rinse Hold option.  
SPIN
Drain and long spin at maximum spin speed: 1200 rpm for
model ZWH 7120 P; 1400 rpm for model ZWH 7140 P;
1600 rpm for model ZWH 7160 P
Max. load 7 kg
Separate spin for hand washed garments and after pro-
grammes with the Rinse Hold option...

They are the most efficient programmes in terms of combined energy and water consumptions for washing
normally soiled cotton laundry.
The water temperature of the washing phase may differ from the temperature declared for the selected
programme.
Consumption values
The data of this table are approximate. Different causes can change the data: the quantity and
type of laundry, the water and ambient temperature.
Programmes
Load
(kg)
Energy consumption
(kWh)Water consumption
(litre)Approximate programme...

Care and cleaning
Warning! Switch the appliance off and re-
move the mains plug from the socket before
any cleaning action.
Maintenance Wash
With the use of low temperature washes it is
possible to get a build up of residues inside the
drum.
We recommend that a maintenance wash be
performed on a regular basis.
To run a maintenance wash:
• The drum should be empty of laundry.
• Select the hottest cotton wash programme.
• Use a normal measure of detergent, must be
a powder with biological properties....

• open the filter cov-
er by pressing the
special hook and
by rotating the cov-
er upwards;
Warning! Keep
the filter cover
open until the filter re-
moval.
• before removing
the filter, remove
any fluff or small
objects from
around the filter;
• remove the filter and clean it under the tap;
• if necessary, place
the filter cover in
the right position
again.
• open the filter cov-
er and insert the fil-
ter again;
The filter is inserted correctly when the
indicator on its top is visible and
blocked.
•...

What to do if…
The appliance does not start or stops during
operation. Certain problems are due to lack of
simple maintenance or oversights, which can
be solved with the help of the indications de-
scribed in the charts, without calling out an en-
gineer.
During appliance operation it is possible that
the red pilot light of the button 9 flashes, thedisplay shows a fault code and the buzzer
sounds to indicate that the appliance is not
working.
Before contacting your local Service Centre,
please carry out...

Fault code and malfunc-
tionPossible cause / Solution
Door open
The door has not been closed or is not closed properly.
• Close firmly the door.
The appliance does not start or stops during
operation without any visible alarm.Before contacting your local Service Centre,
please carry out the checks listed below.
MalfunctionPossible cause / Solution
The appliance does not
start:
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket....

MalfunctionPossible cause / Solution
The door will not open:
The programme is still running.
• Wait the end of washing cycle.
The door lock has not been released.
• Wait until the door lock is released.
Open the door when the pilot light 10 is off.
There is water in the drum.
• Select drain or spin programme to empty out the water.
The appliance vibrates
noisily:
The transit bolts and packing have not been removed.
• Check the correct installation of the appliance.
The appliance is not levelled...

Mod. ... ... ...
Prod. No. ... ... ...
           Ser. No. ... ... ...
Mod. ..
. ... ...
Pr
od. No
.
 ... ... ..
  
   
    
  
  
  
     
    
 S
er
. N
o
. ... 
... 
...
Model description (MOD.) ...............................
Product number (PNC) ...................................
Serial number (S.N.) .......................................
 29 www.zanussi.com
 

30
 www.zanussi.com