Zanussi Zwg 7160 P Manual

Programme - Maximum and Minimum Temperature - Cycle De-
scription - Maximum Spin Speed - Maximum Fabrics Load - Type
of Laundry
OptionsDetergent Com-
partment
JEANS
60°- Cold
Main wash - Rinses - Maximum spin speed at 900 rpm
Max. load 3 kg
Trousers, shirts or jackets in denim and jersey realized with hi-tech
materials. The Extra Rinse option is activated automatically.
SPIN REDUCTION
RINSE HOLD
DELAY START
1) If you select the SUPER QUICK option by pressing button 5, we recommend that you reduce the...

• Remove the drawer.
• To aid cleaning, the top
part of the additive
compartment should be
removed.
• Use a stiff brush to clean and remove all washing
powder residue.
• Clean all the removed parts of the dispenser drawer
under a tap to remove any traces of accumulated
powder.
• Use the previous brush
to clean the recess, en-
suring that upper and
lower part of it is well
cleaned.
After having cleaned the dispenser and the drawer re-
cess, replace it.
Cleaning the drain filter
The filter permits to hold...

• if necessary, place the
filter cover in the right
position again.
• open the filter cover
and insert the filter
again;
The filter is inserted correctly when the indicator on its
top is visible and blocked.
• close the filter cover;
• insert the mains plug
again.
Cleaning the water inlet filters
Important! If the appliance doesnt fill, it takes a long time
to fill with water, the starting button flashes red or the
display (if available) shows the relevant alarm (see chapter
What to do if... for more...

Fault code and malfunctionPossible cause / Solution
Problem with the water supply
The water tap is closed.
• Open the water tap.
The inlet hose is squashed or kinked.
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter are blocked.
• Clean the water inlet filters (read Cleaning the water inlet filters for more details).
Problem with the water drain-
age
The drain hose is squashed or kinked.
• Check the drain hose connection.
The drain filter is clogged.
If the...

MalfunctionPossible cause / Solution
The appliance does not start:
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse has blown.
• Replace the fuse.
The programme selector dial is not correctly positioned and the button 9 has not been
pressed.
• Please turn the selector dial and press the button 9 again.
The delay start has been selected.
• If the laundry are...

MalfunctionPossible cause / Solution
The appliance vibrates noisi-
ly:
The transit bolts and packing have not been removed.
• Check the correct installation of the appliance.
The appliance is not levelled correctly.
• Adjust the feet.
The laundry is not evenly distributed in the drum.
• Redistribute the laundry.
Maybe there is very little laundry in the drum.
• Load more laundry.
Spinning starts late or the ap-
pliance does not spin:
The electronic unbalance detection device has cut in because the...

Mod. ... ... ...
Prod. No. ... ... ...
           Ser. No. ... ... ...
Mod. ..
. ... ...
Pr
od. No
.
 ... ... ..
  
   
    
  
  
  
     
    
 S
er
. N
o
. ... 
... 
...
Model description (MOD.) ...............................
Product number (PNC) ...................................
Serial number (S.N.) .......................................
 27 

 www.zanussi.com/shop
   
192987490-A-092011