Zanussi Zwf 385 User Manual

21
If you are unable to identify or solve the
problem, contact our service centre. 
Before telephoning, make a note of the model,
serial number and purchase date of your
machine: the Service Centre will require this
information.
Mod. ... ... ...
Prod. No. ... ... ...
          Ser. No. ... ... ...
M
o
d
.
 
.
..
 
..
.
 
.
.
.
P
r
o
d
.
 
N
o
. 
.
..
 
..
.
 
.
.
 
 
  
 
  
 
  
 
  
 
  
 
  
 
  
 
  
S
e
r
.
 
No
.
 
..
.
 
.
.
. 
.
..
Technical data
Dimensions Width 60 cm
85 cm
63 cm Height
Depth...

Infos
The consumption data shown on this chart is
to be considered purely indicative, as it may
vary depending on the quantity and type of
laundry, on the inlet water temperature and on
the ambient temperature. It refers to the
highest temperature for each wash
programme.(*) The «Cotton Eco» at 60°C with a load of 5
kg is the reference programme for the data
entered in the energy label, in compliance
with EEC 92/75 standards.
Consumption values
Programme
duration Programme Energy
consumption 
(in...

23
Installation instruction
Unpacking
All transit bolts and packing must be removed
before using the appliance.
You are advised to keep all transit devices so
that they can be refitted if the machine ever
has to be transported again.
1. After removing all the packaging, carefully
lay machine on it’s back to remove the
polystyrene base from the bottom. 
2. Remove the power supply cable and the
draining hose from the hose holders on the
rear of the appliance.
3. With a suitable spanner unscrew and
remove...

If necessary, check the
setting with a spirit
level. 
Water inlet
An inlet hose is supplied and can been found
inside the machine drum.
Do not use the hose from your previous
machine to connect to the water supply.
1. Open the porthole and extract the inlet
hose.
2.Connect the hose
with the angled
connection to the
machine.
Attention !
Do not place the inlet hose downwards.
Angle the hose to the left or right depending
on the position of your water tap.
3. Set the hose correctly by loosening the ring...

25
Attention!
Connect the machine to an earthed socket. 
The manufacturer declines any responsibility
for damage or injury through failure to comply
with the above safety precaution. 
Attention!
Should the appliance power supply cable need
to be replaced, this MUST be carried out by
our Service Centre.
NOTE
Please ensure that when the appliance is
installed it is easily accessible for the engineer
in the event of a breakdown.
Environmental concerns
Packaging materials
The materials marked with the symbol...

www.electrolux.com
Subject to change without notice192 997 080 - 01 - 072008
132970080gb.qxd  13/02/2008  13.44  Page 26