Zanussi Zwf 185 W User Manual

							 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
WASHING MACHINE USER MANUAL 
 
 
 
ZWF185W 
 
 
 
 
 
 
 
 
						

							 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
THE CONTENTS 
 
SECTION 1:BEFORE USING  
• Safety warnings 
• Recommendations 
SECTION 2:INSTALLATION  
•  Removal of transportation screws 
•  Adjustment of feet 
• Electrical connection 
•  Water supply connection 
•  Water drain connection 
SECTION 3:TECHNICAL SPECIFICATIONS 
SECTION 4:CONTROL PANEL 
• Start/Pause button 
•  Function indicator lights 
• Function buttons 
• Program knob 
SECTION 5:WASHING YOUR LAUNDRY 
• Before washing  
•  Running the machine 
SECTION 6:MAINTENANCE AND CLEANING  
•  Water inlet filters 
• Pump filter 
• Detergent drawer 
• Siphon plug 
• The cabinet 
• The drum 
•  Remove of your machine from lime  
 
SECTION 7: PRACTICAL INFORMATION 
 
SECTION 8:AVOIDING MINOR FAULTS 
 
SECTION 9:AUTOMATIC FAILURE DETECTION SYSTEM 
 
SECTION 10:INTERNATIONAL WASHING SIGNS
    
 
 
 
 
 
 
 
 1 
 
						

							 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
SECTION 1:BEFORE USING  
 
 
SAFETY WARNINGS 
 
•
•• • Do not use a multiple socket or extension cord. 
•  Do not insert a plug with damaged or broken cord into the socket.  
•  If the cord is damaged it should be replaced by the manufacturer or 
appointed service agent in order to avoid a hazard. 
•
•• • Never remove the plug from the socket by pulling from the cord 
section. Remove the plug by holding. 
•
•• • Do not plug the power supply with wet hands. 
•
•• • Never touch the machine with wet hands or feet. 
•
•• • Never open the detergent drawer while the device is running. 
•
•• • Never force to open the door of the machine while the machine is  
running. 
•
•• • Since the machine can reach high temperatures while running, do not 
touch the drain hose and water during draining. 
•
•• • In case of any failure, first unplug the device and close the water tap. 
Do not attempt to repair.Please apply to the nearest authorized 
service station. 
•
•• • Do not forget that the packing material of your machine may be 
hazardous for children. 
•
•• • Do not let your children play with the washing machine. 
•
•• • Keep your pet away from your machine. 
•
•• • Your machine should only be used by adults within the information 
written in this manual. 
•
•• • Your machine is designed for use in house environment. W arranty 
will be invalid if you use it for commercial purposes. 
•
•• • The appliance should not be put on a carpet which can block the air 
ventilation on the bottom side. 
 
 
RECOMMENDATIONS   
 
•
•• • The detergent or softener in contact with air for a long time will dry 
and stick to your detergent drawer.To avoid this put your detergent 
and softener into the detergent drawer just before washing. 
•
•• • It is recommended that you use pre-washing program for only very 
dirty clothes. 
•
•• • Please do not exceed the maximum loading capacity. 
 
 
 2 
 
						

							 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
•
•• • If you will not use your machine for a long time, unplug your machine, 
close the water supply and leave the door open in order to keep the 
inside of the machine dry and for prevention from unpleasant odour. 
•
•• • As a result of the quality control procedures, a certain amount of 
water may remain in your machine. This is not harmful for your 
machine. 
SECTION 2: INSTALLATION  
You must pay attention to the following issues before using your washing 
machine.
REMOVAL OF TRANSPORTATION SCREWS 
•
•• • Transportation screws, which are located at the back side of the 
machine, must be removed before running the machine. 
•
•• • Loosen the screws by rotating counterclockwise by a suitable wrench. 
(DIAGRAM-1) 
•
•• • Remove the screws by pulling them.(DIAGRAM-2) 
•
•• • To the holes where the transport screws have been removed, insert 
the plastic transport screw taps found in the accessories bag. 
(DIAGRAM-3) 
•
•• • The transportation screws, that have been removed from the machine 
should be kept in hand for any other transportation necessities. 
 
 
 
 
 
 
 
    DIAGRAM-2 
 
          DIAGRAM-1           DIAGRAM-3 
 
 
ADJUSTMENT OF FEET 
•
•• • Do not install your machine on rugs or similar surfaces. 
•
•• • For your machine to work silently and without any vibration, it should 
be settled on a flat, non-slippery and tough ground. 
 
 
 
 
 
 
 
 
 3 
 
						

							 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
•
•• • You can adjust the balance of your machine from its feet. 
•
•• • First, loosen the plastic adjustment nut. 
•
•• • Adjust by rotating the feet upwards or downwards. 
•
•• • After the balance has been reached, tighten the plastic adjustment 
nut again by rotating it upwards. 
•
•• • Never put cartons, wooden blocks or similar materials under  the 
machine to balance the irregularities on the level of the ground. 
       
 
 
 
 
 
 
 
 
 
ELECTRICAL CONNECTION 
•
•• • Your washing machine works with 220-240V and 50Hz. 
•
•• • A special grounded plug has been attached to the network cable of 
your washing machine. This plug must definitely be inserted to a 
grounded socket with 10 ampere. The fuse flow value of the 
electricity line attached to this should also be 10 ampere. If you have 
no such sockets and fuses in your house, let it be made by a qualified 
electrician. 
• Our company will not be responsible for any damages that may 
occur as a result of usage without grounding. 
 
WATER SUPPLY CONNECTION  
•  Depending on the features your machine,may be with single water 
inlet(cold) or double water inlet (cold/hot). The white headed hose is 
for cold water inlet and red headed hose is for hot water inlet (valid 
for machines with hot&cold water inlet). 
•  To prevent leakage from the connection joints, 1 (valid for cold water 
inlet) or 2 (valid for machines with hot&cold water inlet) seals are 
included in the hose packing. Fit these seals at the end of water inlet 
hoses on the tap side. 
•  Connect the white headed hose to the water inlet valve with white 
filter and connect the red headed hose to the water inlet valve with 
red filter (latter is valid in machines with hot&cold water inlet). Tighten 
the plastic parts of the connections with your hand.Please call a 
qualified plumber for safer connections.  
 
 
 4 
 
						

							 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
•  Water pressure of 1-10 bars from your tap will enable your machine 
to work more efficiently.(1 bar pressure means water flow of more 
than 8 liters in 1 minute from a fully opened tap). 
•  After connections are completed, check for the non-leakage of the 
connection joints by turning on your tap completely. 
•  Be sure that water inlet hoses are not folded, broken or crushed. 
•  Mount the water inlet hoses to a 3”/4, geared water tap.      
 
Cold water inlet (White filter valve) 
 
 
 
 
 
 
 
 
 
 
    
 
     
WATER DRAIN CONNECTION 
•  Be sure that water inlet hoses are not folded, twisted, crushed or 
elongated by stretching. 
•   Water drain hose should be mounted at a height of minimum 60 cm, 
maximum 100 cm from the ground. 
•  The end of the water drain hose may directly be fitted to the dirty 
water outlet hole or a special apparatus mounted on the outlet 
bracket of the wash-stand.   
•  Never attempt to extend the water drain hose by adding extra parts. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 5 
 
						

							 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
SECTION 3:TECHNICAL SPECIFICATIONS
 
 
ZWF185W 
Maximum dry laundry capacity (kg)  5 
Recommended loading (kg)  4,5 
Height (cm)  85 
Width (cm)  59,6 
Depth (cm)  51 Maximum spin cycle ( rpm )  800 
(*) Maximum spin cycles depend on the model you’ve chosen  
 
 
                         1         2               3   
           
 
        
                 
                
 
 
                            
 
                           4 
                                
        5           
        
 
 
 
 
               
        6 
 
               
        7 
  
                        
 1-Upper tray    5-Handle 
 2-Detergent drawer    6-Filter cover 
 3-Control panel    7-Kickplate 
 4-Door 
                   
These technical specifications written above for single water inlet (cold) and 
double water inlet (cold/hot) in machines.
 6 
 
						

							 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
SECTION 4:CONTROL PANEL 
 
                 1         2             3                           4        5 
 
 
 
 
 
 
  
 
     
 
 
                      6        7                           8 
 
  
 1-Detergent drawer    5-Program knob 
 2-Start/pause light    6-Start/pause button 
 3-Function indicator lights    7-Function buttons 
  4-Program ready light    8-Program end light                        
   
                         
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 7 
 
						

							 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
START/PAUSE BUTTON 
                  Used to start a selected program or pause during running. 
                           
 
                        
WARNING! 
                  It is required for the program knob to be brought to O(off)    
       position before selecting the program or changing a continuing 
       program. 
FUNCTION INDICATOR LIGHTS 
       W hen the start/pause button or any function button is pressed,the 
       corresponding light turns on.The light turns off when the function 
       button or start/pause button is re-pressed, or when the process 
       the selected function is completed. 
 
The function indicator lights are also used in failure detection system 
mentioned in section 9. 
 
FUNCTION BUTTONS 
       Rinse hold 
       This function is recommended to be used when the clothes cannot 
       be taken immediately after the end of the program.This will      
       prevent occurrence of wrinkles. When this button is pressed, the 
       last rinsing water is not drained. For the program to continue from 
       the same point, repress the same button. 
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 8 
 
						

							 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
       If you do not want your sensitive clothes to be spinned or you   
       want them to be spinned sensitively, turn the program knob  to O 
       (off) position. Bring the program knob on one of the draining or 
       spinning programs you desire and press the start/pause        
       button. If the program you have selected is a drain program, your 
       machine will draining the water inside.If you have selected a     
       spinning program, your machine will perform a spinning operation 
       and then end the program.     
 
                 Extra rinse 
    You can have one more rinsing done in addition to the rinses             
     which your machine has made in all washing programs by using  
     this function. 
 
                  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 9