Zanussi Zwf 185 W User Manual

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
WASHING MACHINE USER MANUAL 
 
 
 
ZWF185W 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
THE CONTENTS 
 
SECTION 1:BEFORE USING  
• Safety warnings 
• Recommendations 
SECTION 2:INSTALLATION  
•  Removal of transportation screws 
•  Adjustment of feet 
• Electrical connection 
•  Water supply connection 
•  Water drain connection 
SECTION 3:TECHNICAL SPECIFICATIONS 
SECTION 4:CONTROL PANEL 
• Start/Pause button 
•  Function indicator lights 
• Function buttons 
• Program...

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
SECTION 1:BEFORE USING  
 
 
SAFETY WARNINGS 
 
•
•• • Do not use a multiple socket or extension cord. 
•  Do not insert a plug with damaged or broken cord into the socket.  
•  If the cord is damaged it should be replaced by the manufacturer or 
appointed service agent in order to avoid a hazard. 
•
•• • Never remove the plug from the socket by pulling from the cord 
section. Remove...

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
•
•• • If you will not use your machine for a long time, unplug your machine, 
close the water supply and leave the door open in order to keep the 
inside of the machine dry and for prevention from unpleasant odour. 
•
•• • As a result of the quality control procedures, a certain amount of 
water may remain in your machine. This is not harmful for your 
machine. 
SECTION 2: INSTALLATION...

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
•
•• • You can adjust the balance of your machine from its feet. 
•
•• • First, loosen the plastic adjustment nut. 
•
•• • Adjust by rotating the feet upwards or downwards. 
•
•• • After the balance has been reached, tighten the plastic adjustment 
nut again by rotating it upwards. 
•
•• • Never put cartons, wooden blocks or similar materials under  the 
machine to balance the...

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
•  Water pressure of 1-10 bars from your tap will enable your machine 
to work more efficiently.(1 bar pressure means water flow of more 
than 8 liters in 1 minute from a fully opened tap). 
•  After connections are completed, check for the non-leakage of the 
connection joints by turning on your tap completely. 
•  Be sure that water inlet hoses are not folded, broken or crushed. 
•...

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
SECTION 3:TECHNICAL SPECIFICATIONS
 
 
ZWF185W 
Maximum dry laundry capacity (kg)  5 
Recommended loading (kg)  4,5 
Height (cm)  85 
Width (cm)  59,6 
Depth (cm)  51 Maximum spin cycle ( rpm )  800 
(*) Maximum spin cycles depend on the model you’ve chosen  
 
 
                         1         2               3...

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
SECTION 4:CONTROL PANEL 
 
                 1         2             3                           4        5 
 
 
 
 
 
 
  
 
     
 
 
                      6        7                           8 
 
  
 1-Detergent drawer    5-Program knob 
 2-Start/pause light    6-Start/pause button 
 3-Function indicator lights    7-Function buttons 
  4-Program ready light    8-Program end light...

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
START/PAUSE BUTTON 
                  Used to start a selected program or pause during running. 
                           
 
                        
WARNING! 
                  It is required for the program knob to be brought to O(off)    
       position before selecting the program or changing a continuing 
       program. 
FUNCTION INDICATOR LIGHTS 
       W hen the start/pause...

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
       If you do not want your sensitive clothes to be spinned or you   
       want them to be spinned sensitively, turn the program knob  to O 
       (off) position. Bring the program knob on one of the draining or 
       spinning programs you desire and press the start/pause        
       button. If the program you have selected is a drain program, your 
       machine will...