Zanussi Zwf 1430 S Manual

11
7. Select the spin speed or the
Rinse Hold option
Press the “Spin” button repeatedly, in order to select the
desired spin speed or the Rinse Hold option. The
relevant light will light up.
If you select the Rinse Hold option, the machine will
stop at the end of the programme with the water still in
the tub.
ZWF 1230 W ZWF 1430 W-ZWF 1430 S
ZWF 1630 W
8. Select the desired options
If your laundry is very dirty, it may be advisable to
select the Prewash option.
If you wish the laundry to undergo a soak,...

12
11. Start the programme
Press the Start/Pause button. The relevant light will stop
flashing and only the light relevant to the phase that is in
progress will remain lit.
If you have chosen a delayed start, the washing machine
will begin the countdown.
The display will show the duration of the programme or
the selected delay.
12. How to change a programme
during its cycle
Before you make any change, you must pause the
washing machine by pressing the Start/Pause button.
It is possible to change any...

13
Washing Hints
Do NOToverload the machine. Weigh the laundry the
first few times you use the appliance. 
The average weights of the most common items are
listed below as a guide:
1000g = 1 kg
Sheet 700-1000 g
Pillow case  100-200 g
Tablecloth 400-500 g
Serviette 50-100 g
Tea towel  70-120 g
Linen hand towel  100-150 g
Towelling hand towel  150-250 g
Towelling bath towel  700-1000 g
Bath robe  1000-1500 g
Man’s shirt  200-300 g
Apron 150-200 g
●Load the laundry loosely alternating large items with
small...

14
And in which form?
Not only are there different types of detergent, but they
are also available in different forms. Whether you chose
a powder or liquid in traditional or compact form is
your own personal choice.
TRADITIONAL POWDERS
Pour the powder directly into the dispenser drawer. Do
not sprinkle powder onto clothes in the machine drum.
TRADITIONAL LIQUIDS
Liquid can be placed in the main wash compartment of
the detergent drawer marked with the symbol  , start
the machine immediately upon placing...

15
Wash Care Symbols
Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling
code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct
programme on your washing machine.
WASHING SYMBOL
BLEACHING
IRONING
DRY CLEANING
TUMBLE DRYING
WASH ACTIONFABRIC
Hot iron
Warm iron
Cool ironCotton, Linen, Viscose
Polyester mixtures, Wool
Acrylic, Nylon, Polyester
Important Notes
For best results, always use...

16
Washing programmes
The “cottons programme” at 60°C  + 40°AA is the reference programme for the data entered in the energy label, in
compliance with EEC 92/75 standards.
* This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of
laundry, the temperature of the water supply and the ambient temperature. The data refers to the highest temperature
provided for each programme.Type of
laundry and
symbols on
labels
Spin 
Rinse Hold 
Prewash
Outdoor...

17 17
Maintenance and Cleaning
Before any maintenance or cleaning is carried out you
must DISCONNECTthe appliance from the electricity
supply.
Descaling
The water we use normally contains lime. It is a good
idea to periodically use a water softening powder in the
machine. Do this separately from any laundry washing,
and according to the softening powder manufacturers
instructions. This will help to prevent the formation of
lime deposits.
After each wash
Leave the door open for a while. This helps to...

18 •  When no more water comes out, unscrew the pump
cover and remove it. Always keep a rag nearby to dry
up spillage of water when removing the cover.
•Remove any objects from the pump impeller by
rotating it.
• Put the cap back on the emergency emptying hose and
place the latter back in its seat.
•  Screw the pump cover fully in.
• Close the pump door.
Wa r n i n g
When the appliance is in use and depending on the
programme selected there can be hot water in the pump.
Never remove the pump cover during...

19
Something Not Working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without
calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed
below.
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or
installation, a charge will be made even if the appliance is under guarantee.
During machine operation it is possible that one of the following alarm...

20 20
Symptom
The door will not open
Possible causes
●The water level is above the bottom edge of the door.
●The machine is heating the water.
●The drum is turning.
Spinning starts late or the machine
does not spin●The electronic unbalance detection device has cut in because the
laundry is not  evenly distributed  in the drum. The laundry is
redistributed by reverse rotation of the drum. This may happen several
times before the unbalance disappears and normal spinning can resume.
If, after 6 minutes, the...