Zanussi Zrb 334 W User Manual

							ENUser manual 2
FRNotice dutilisation 9
DEBenutzerinformation 19
Fridge-Freezer
Réfrigérateur/congélateur
Kühl-/Gefrierschrank
ZRB329W
ZRB334W
ZRB336W
ZRB340PW
 
						

							Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  2
Operation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4
First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  4
Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  5Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  5
Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  6
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  6
Environmental concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _  8
Subject to change without notice
 Safety information
In the interest of your safety and to ensure the correct use,
before installing and first using the appliance, read this
user manual carefully, including its hints and warnings.
To avoid unnecessary mistakes and accidents, it is im-
portant to ensure that all people using the appliance are
thoroughly familiar with its operation and safety features.
Save these instructions and make sure that they remain
with the appliance if it is moved or sold, so that everyone
using it through its life will be properly informed on ap-
pliance use and safety.
For the safety of life and property keep the precautions of
these users instructions as the manufacturer is not re-
sponsible for damages caused by omission.
Children and vulnerable people safety
• This appliance is not intended for use by persons (in-
cluding children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowl-
edge, unless they have been given supervision or in-
struction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do
not play with the appliance.
• Keep all packaging well away from children. There is
risk of suffocation.
• If you are discarding the appliance pull the plug out of
the socket, cut the connection cable (as close to the
appliance as you can) and remove the door to prevent
playing children to suffer electric shock or to close
themselves into it.
• If this appliance featuring magnetic door seals is to
replace an older appliance having a spring lock (latch)
on the door or lid, be sure to make that spring lock
unusable before you discard the old appliance. This
will prevent it from becoming a death trap for a child.
General safety
Caution!  Keep ventilation openings clear of
obstruction.
• The appliance is designed exclusively for domestic
use.
• The appliance is intended for keeping foodstuff and/or
beverages in a normal household as explained in this
instruction booklet.
• Do not use a mechanical device or any artificial means
to speed up the thawing process.
• Do not use other electrical appliances (such as ice
cream makers) inside of refrigerating appliances, un-
less they are approved for this purpose by the manu-
facturer.
• Do not damage the refrigerant circuit.
• The refrigerant isobutane (R600a) is contained within
the refrigerant circuit of the appliance, a natural gas
with a high level of environmental compatibility, which
is nevertheless flammable.
During transportation and installation of the appliance,
be certain that none of the components of the refrig-
erant circuit become damaged.
If the refrigerant circuit should become damaged:
– avoid open flames and sources of ignition
– thoroughly ventilate the room in which the appli-
ance is situated
• It is dangerous to alter the specifications or modify this
product in any way. Any damage to the cord may cause
a short-circuit, fire and/or electric shock.
Warning!  Any electrical component (power cord,
plug, compressor) must be replaced by a certified
service agent or qualified service personnel.
1. Power cord must not be lengthened.
2
 
 
						

							2. Make sure that the power plug is not squashed or
damaged by the back of the appliance. A squashed
or damaged power plug may overheat and cause
a fire.
3. Make sure that you can come to the mains plug of
the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose, do not insert the
power plug. There is a risk of electric shock or fire.
6. You must not operate the appliance without the
lamp cover
1) of interior lighting.
• This appliance is heavy. Care should be taken when
moving it.
• Do not remove nor touch items from the freezer com-
partment if your hands are damp/wet, as this could
cause skin abrasions or frost/freezer burns.
• Avoid prolonged exposure of the appliance to direct
sunlight.
•
Bulb lamps
2) used in this appliance are special pur-
pose lamps selected for household appliances use
only. They are not suitable for household room illu-
mination.
Daily Use
• Do not put hot pot on the plastic parts in the appliance.
• Do not store flammable gas and liquid in the appliance,
because they may explode.
• Do not place food products directly against the air
outlet on the rear wall.
3)
• Frozen food must not be re-frozen once it has been
thawed out.
• Store pre-packed frozen food in accordance with the
frozen food manufacturers instructions.
• Appliances manufacturers storage recommendations
should be strictly adhered to.
• Do not place carbonated or fizzy drinks in the freezer
compartment as it creates pressure on the container,
which may cause it to explode, resulting in damage to
the appliance.
• Ice lollies can cause frost burns if consumed straight
from the appliance.
Care and cleaning
• Before maintenance, switch off the appliance and dis-
connect the mains plug from the mains socket.
• Before using the appliance for the first time, wash the
interior and all internal accessories with lukewarm wa-
ter and some neutral soap so as to remove the typical
smell of a brand-new product, then dry thoroughly.
• Do not clean the appliance with metal objects.
• Do not use sharp objects to remove frost from the ap-
pliance. Use a plastic scraper.
• Never use a hair drier or other heating appliances to
speed up defrosting. Excessive heat may damage the
plastic interior, and humidity could enter the electric
system making it live.
• Regularly examine the drain in the refrigerator for de-
frosted water. If necessary, clean the drain. If the drain
is blocked, water will collect in the bottom of the ap-
pliance.
Installation
Important!  For electrical connection carefully follow the
instructions given in specific paragraphs.
• Unpack the appliance and check if there are damages
on it. Do not connect the appliance if it is damaged.
Report possible damages immediately to the place you
bought it. In that case retain packing.
• It is advisable to wait at least four hours before con-
necting the appliance to allow the oil to flow back in
the compressor.
• Adequate air circulation should be around the appli-
ance, lacking this leads to overheating. To achieve
sufficient ventilation follow the instructions relevant to
installation.
• Wherever possible the back of the product should be
against a wall to avoid touching or catching warm parts
(compressor, condenser) to prevent possible burn.
• The appliance must not be located close to radiators
or cookers.
• Make sure that the mains plug is accessible after the
installation of the appliance.
•
Connect to potable water supply only.
4)
1) If the lamp cover is foreseen
2) If the lamp is foreseen
3) If the appliance is Frost Free
4) If a water connection is foreseen
 3
 
						

							Service
• Any electrical work required to do the servicing of the
appliance should be carried out by a qualified electri-
cian or competent person.
• This product must be serviced by an authorized Service
Centre, and only genuine spare parts must be used.
Environment Protection
This appliance does not contain gasses which could
damage the ozone layer, in either its refrigerant cir-
cuit or insulation materials. The appliance shall not be
discarded together with the urban refuse and rubbish. The
insulation foam contains flammable gases: the appliance
shall be disposed according to the applicable regulations
to obtain from your local authorities. Avoid damaging the
cooling unit, especially at the rear near the heat exchang-
er. The materials used on this appliance marked by the
symbol 
 are recyclable.
Operation
Switching on
Insert the plug into the wall socket.
Turn the Temperature regulator clockwise to a medium
setting.
Switching off
To turn off the appliance, turn the Temperature regulator
to the O position.
Temperature regulation
The temperature is automatically regulated.
To operate the appliance, proceed as follows:
• turn the Temperature regulator toward lower settings
to obtain the minimum coldness.
• turn the Temperature regulator toward higher settings
to obtain the maximum coldness.
A medium setting is generally the most suitable.
However, the exact setting should be chosen keeping in
mind that the temperature inside the appliance depends
on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
Important!  If the ambient temperature is high or the
appliance is fully loaded, and the appliance is set to the
lowest temperatures, it may run continuously causing
frost to form on the rear wall. In this case the dial must be
set to a higher temperature to allow automatic defrosting
and therefore reduced energy consumption.
First use
Cleaning the interior
Before using the appliance for the first time, wash the
interior and all internal accessories with lukewarm water
and some neutral soap so as to remove the typical smell
of a brand-new product, then dry thoroughly.
Important!  Do not use detergents or abrasive powders,
as these will damage the finish.
Daily use
Freezing fresh food
The freezer compartment is suitable for freezing fresh food
and storing frozen and deep-frozen food for a long time.
To freeze fresh foods it is not necessary to change the
medium setting.
However, for a faster freezing operation, turn the temper-
ature regulator toward higher settings to obtain the max-
imum coldness.
Important!  In this condition, the refrigerator compartment
temperature might drop below 0°C. If this occurs reset
the temperature regulator to a warmer setting.
Place the fresh food to be frozen on the top compartment.
Storage of frozen food
When first starting-up or after a period out of use, before
putting the products in the compartment let the appliance
run at least 2 hours on the higher settings.
4
 
 
						

							Important!  In the event of accidental defrosting, for
example due to a power failure, if the power has been off
for longer than the value shown in the technical
characteristics chart under rising time, the defrosted
food must be consumed quickly or cooked immediately
and then re-frozen (after cooling).
Thawing
Deep-frozen or frozen food, prior to being used, can be
thawed in the refrigerator compartment or at room tem-
perature, depending on the time available for this opera-
tion.
Small pieces may even be cooked still frozen, directly
from the freezer: in this case, cooking will take longer.
Helpful hints and tips
Normal Operating Sounds
• You may hear a faint gurgling and a bubbling sound
when the refrigerant is pumped through the coils or
tubing. This is correct.
• When the compressor is on, the refrigerant is being
pumped around and you will hear a whirring sound
and a pulsating noise from the compressor. This is
correct.
• The thermic dilatation might cause a sudden cracking
noise. It is natural, not dangerous physical phenom-
enon. This is correct.
• When the compressor switches on or switches off, you
will hear a faint click of the temperature regulator.
This is correct.
Care and cleaning
Caution!  Unplug the appliance before carrying out
any maintenance operation.
This appliance contains hydrocarbons in its cooling
unit; maintenance and recharging must therefore
only be carried out by authorized technicians.
Periodic cleaning
The equipment has to be cleaned regularly:
• clean the inside and accessories with lukewarm water
and some neutral soap.
• regularly check the door seals and wipe clean to ensure
they are clean and free from debris.
• rinse and dry thoroughly.
Important!  Do not pull, move or damage any pipes and/
or cables inside the cabinet.
Never use detergents, abrasive powders, highly perfumed
cleaning products or wax polishes to clean the interior as
this will damage the surface and leave a strong odour.
Clean the condenser (black grill) and the compressor at
the back of the appliance with a brush or a vacuum cleaner.
This operation will improve the performance of the ap-
pliance and save electricity consumption.
Important!  Take care of not to damage the cooling system.
Many proprietary kitchen surface cleaners contain chem-
icals that can attack/damage the plastics used in this ap-
pliance. For this reason it is recommended that the outer
casing of this appliance is only cleaned with warm water
with a little washing-up liquid added.
After cleaning, reconnect the equipment to the mains
supply.
Defrosting of the refrigerator
Frost is automatically eliminated from the evaporator of
the refrigerator compartment every time the motor com-
pressor stops, during normal use. The defrost water
drains out through a trough into a special container at the
back of the appliance, over the motor compressor, where
it evaporates.
It is important to periodically clean the defrost water drain
hole in the middle of the refrigerator compartment channel
to prevent the water overflowing and dripping onto the
food inside. Use the special cleaner provided, which you
will find already inserted into the drain hole.
 5
 
						

							Defrosting the freezer
A certain amount of frost will always form on the freezer
shelves and around the top compartment.
Defrost the freezer when the frost layer reaches a thickness
of about 3-5 mm.
To remove the frost, follow the instructions below:
• pull out the plug from the wall socket or switch off the
appliance
• remove any stored food, wrap it in several layers of
newspaper and put it in a cool place
• remove the freezer drawers
• put insulating material around the drawers, e.g. blan-
kets or newspapers.
Defrosting can be accelerated by placing bowls with hot
water (not boiling) inside the freezer.
• Loosen the drainage channel from its resting position,
push it in according to the illustration and place it in
the bottom freezer drawer where water can collect
• carefully scrape off the ice when it starts to thaw. Use
a wood or a plastic scraper
• when all the ice has melted, clean and wipe the cabinet
dry, then put the drainage channel back in place.
• switch on the cabinet and replace the frozen foodstuff.
It is recommended to operate the appliance at the highest
position of the thermostatic control for some hours so that
it can reach the sufficient storing temperature as soon as
possible.
Important!  Never use sharp metal tools to scrape off frost
from the evaporator as you could damage it. Do not use
a mechanical device or any artificial means to speed up
the thawing process other than those recommended by
the manufacturer. A temperature rise of the frozen food
packs, during defrosting, may shorten their safe storage
life.
Technical data
  ZRB329WZRB334WZRB336WZRB340PW
Dimension     
 Height1540 mm1750 mm1850 mm2010 mm
 Width595 mm595 mm595 mm595 mm
 Depth632 mm632 mm632 mm632 mm
Rising Time 20 h20 h20 h20 h
The technical information are situated in the rating plate
on the internal left side of the appliance and in the energy
label.
Installation
Caution!  Read the Safety Information carefully for
your safety and correct operation of the appliance
before installing the appliance.
6
 
 
						

							Positioning
Install this appliance at a location where the ambient tem-
perature corresponds to the climate class indicated on the
rating plate of the appliance:
Climate
classAmbient temperature
SN+10°C to + 32°C
N+16°C to + 32°C
ST+16°C to + 38°C
T+16°C to + 43°C
Location
The appliance should be installed well away from sources
of heat such as radiators, boilers, direct sunlight etc. En-
sure that air can circulate freely around the back of the
cabinet. To ensure best performance, if the appliance is
positioned below an overhanging wall unit, the minimum
distance between the top of the cabinet and the wall unit
must be at least 100 mm . Ideally, however, the appliance
should not be positioned below overhanging wall units.
Accurate levelling is ensured by one or more adjustable
feet at the base of the cabinet.
Warning!  It must be possible to disconnect the
appliance from the mains power supply; the plug
must therefore be easily accessible after installation.
AB
min.100 mm 20 mm
Rear spacers and levelling
12
3
In the bag with the docu-
mentation, there are two
spacers which must be fit-
ted as shown in the figure.
Slacken the screws and in-
sert the spacer under the
screw head, then tighten
again the screws.When placing the appli-
ance ensure that it stands
level. This can be achieved
by two adjustable feet at
the bottom in front.
Electrical connection
Before plugging in, ensure that the voltage and frequency
shown on the rating plate correspond to your domestic
power supply.
The appliance must be earthed. The power supply cable
plug is provided with a contact for this purpose. If the
domestic power supply socket is not earthed, connect the
appliance to a separate earth in compliance with current
regulations, consulting a qualified electrician.
The manufacturer declines all responsibility if the above
safety precautions are not observed.
This appliance complies with the E.E.C. Directives.
Door reversibility
Warning!  Before carrying out any operations,
remove the plug from the power socket.
Important!  To carry out the following operations, we
suggest that this be made with another person that will
keep a firm hold on the doors of the appliance during the
operations.
 7
 
						

							m1
m2
m3m4 m5m6
1
• Open the doors. Un-
screw the middle hinge
(m2). Remove the plas-
tic spacer (m1).
• Remove the spacer (m6)
and move to the other
side of the hinge pivot
(m5).
• Remove the doors.
• Remove the left-hand
cover pin of the middle
hinge (m3,m4) and
move to the other side.
• Fit the pin of the middle
hinge (m5) into the left-
hand hole of the lower
door.• Unscrew the lower hinge
(b1)
• Remove the left-hand
cover pins (b4) and
move to the other side.
• Re-screw the lower
hinge (b1) on the oppo-
site side.
• Unscrew the lower hinge
pivot (b2) and the spacer
(b3) and place them on
the opposite side.• Remove the plugs (1) on
the upper side of both
doors and move them to
the other side.
• Re-insert the lower door
on the lower hinge pivot
(b2).
• Insert the middle hinge
(m2) into the left drill of
the lower door.• Unscrew the upper
hinge pivot and place it
on the opposite side.
• Fit the upper door on the
upper door pivot.
• Re-insert the upper door
on the middle hinge piv-
ot (m5) slightly tilting
both doors.
• Re-screw the middle
hinge (m2). Do not for-
get the plastic spacer
(m1).
Do a final check to make sure that:
• All screws are tightened.
• The edges of the doors run parallel to the side edge of
the appliance.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that case,
wait for the natural fitting of the gasket.
In case you do not want to carry out the above mentioned
operations, contact the nearest After Sales Service Force.
The After Sales Service specialist will carry out the rever-
sibility of the doors at your cost.
Environmental concerns
The symbol    on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potentialnegative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please
contact your local council, your household waste disposal
service or the shop where you purchased the product.
8
 
 
						

							Sommaire
Consignes de sécurité _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  9
Fonctionnement _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  12
Première utilisation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  13
Utilisation quotidienne _ _ _ _ _ _ _ _ _ _ _ _ _ _  13
Conseils utiles _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _   13Entretien et nettoyage _ _ _ _ _ _ _ _ _ _ _ _ _ _  14
Caractéristiques techniques _ _ _ _ _ _ _ _ _ _ _  15
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _  15
En matière de sauvegarde de lenvironnement _  _  _   17
Sous réserve de modifications
  Consignes de sécurité
Pour votre sécurité et garantir une utilisation correcte de
lappareil, lisez attentivement cette notice, y compris les
conseils et avertissements, avant dinstaller et dutiliser
lappareil pour la première fois. Pour éviter toute erreur
ou accident, veillez à ce que toute personne qui utilise
lappareil connaisse bien son fonctionnement et ses fonc-
tions de sécurité. Conservez cette notice avec lappareil.
Si lappareil doit être vendu ou cédé à une autre personne,
veillez à remettre cette notice au nouveau propriétaire, afin
quil puisse se familiariser avec son fonctionnement et sa
sécurité.
Pour la sécurité des personnes et des biens, conservez et
respectez les consignes de sécurité figurant dans cette
notice. Le fabricant décline toute responsabilité en cas de
dommages dus au non-respect de ces instructions.
Lors de sa fabrication, cet appareil a été construit selon
des normes, directives et/ou décrets pour une utilisation
sur le territoire français.
Pour la sécurité des biens et des personnes ainsi que pour
le respect de lenvironnement, vous devez dabord lire
attentivement les préconisations suivantes avant toute
utilisation de votre appareil.
Attention  Pour éviter tout risque de détérioration de
lappareil, transportez-le dans sa position
dutilisation muni de ses cales de transport (selon le
modèle). Au déballage de celui-ci, et pour empêcher des
risques dasphyxie et corporel, tenez les matériaux
demballage hors de portée des enfants.
Attention  Pour éviter tout risque (mobilier,
immobilier, corporel,...), linstallation, les
raccordements (eau, gaz, électricité, évacuation selon
modèle), la mise en service et la maintenance de votre
appareil doivent être effectuées par un professionnel
qualifié.
Attention  Votre appareil a été conçu pour être utilisé
par des adultes. Il est destiné à un usagedomestique normal. Ne lutilisez pas à des fins
commerciales ou industrielles ou pour dautres buts que
ceux pour lesquels il a été conçu. Vous éviterez ainsi des
risques matériel et corporel.
Attention  Débranchez lappareil avant toute
opération de nettoyage manuel. Nutilisez que des
produits du commerce non corrosifs ou non
inflammables. Toute projection deau ou de vapeur est
proscrite pour écarter le risque délectrocution.
Attention  Si votre appareil est équipé dun
éclairage, débranchez lappareil avant de procéder
au changement de lampoule (ou du néon, etc.) pour éviter
de sélectrocuter.
Attention  Afin dempêcher des risques dexplosion
ou dincendie, ne placez pas de produits
inflammables ou déléments imbibés de produits
inflammables à lintérieur, à proximité ou sur lappareil.
Attention  Lors de la mise au rebut de votre appareil,
et pour écarter tout risque corporel, mettez hors
dusage ce qui pourrait présenter un danger : coupez le
câble dalimentation au ras de lappareil. Informez-vous
auprès des services de votre commune des endroits
autorisés pour la mise au rebut de lappareil.
Attention  Respectez la chaîne de froid dès
lacquisition dun aliment jusquà sa consommation
pour exclure le risque dintoxication alimentaire.
Veuillez maintenant lire attentivement cette notice pour
une utilisation optimale de votre appareil.
Sécurité des enfants et des personnes vulnérables
• Cet appareil nest pas destiné à être utilisé par des
enfants ou des personnes dont les capacités physi-
ques, sensorielles ou mentales, ou le manque dexpé-
rience et de connaissance les empêchent dutiliser
lappareil sans risque lorsquils sont sans surveillance
 9
 
						

							ou en labsence dinstruction dune personne respon-
sable qui puisse leur assurer une utilisation de lap-
pareil sans danger.
Empêchez les enfants de jouer avec lappareil.
• Ne laissez pas les différents emballages à portée des
enfants. Ils pourraient sasphyxier.
• Si lappareil doit être mis au rebut, veillez à couper le
câble dalimentation électrique au ras de lappareil
pour éviter les risques délectrocution. Démontez la
porte pour éviter que des enfants ne restent enfermés
à lintérieur.
• Cet appareil est muni de fermetures magnétiques. Sil
remplace un appareil équipé dune fermeture à ressort,
nous vous conseillons de rendre celle-ci inutilisable
avant de vous en débarrasser. Ceci afin déviter aux
enfants de senfermer dans lappareil et de mettre ainsi
leur vie en danger.
Mesures générales de sécurité
Attention  Veillez à ce que les orifices de ventilation
ne soient pas obstrués.
• Cet appareil est destiné uniquement à la conservation
d’aliments et/ou de boissons dans le cadre d’un usage
domestique normal, tel que celui décrit dans la pré-
sente notice.
• Nutilisez pas dappareils électriques, dagents chimi-
ques ou tout autre système artificiel pour accélérer le
processus de dégivrage.
• N’utilisez pas dautres appareils électriques (par exem-
ple, sorbetières) à lintérieur d’appareils réfrigérants
sauf s’ils sont homologués pour cet usage par leur
fabricant.
• Faites très attention lorsque vous déplacez lappareil
afin de ne pas endommager des parties du circuit de
refroidissement et ainsi déviter des risques de fuite.
• Le circuit de refroidissement de l’appareil contient de
l’isobutane (R600a), un gaz naturel offrant un haut ni-
veau de compatibilité avec l’environnement mais qui
est néanmoins inflammable.
Pendant le transport et linstallation de l’appareil, as-
surez-vous quaucune pièce du circuit de refroidisse-
ment nest endommagée.
Si tel est le cas :
– Évitez les flammes vives (briquet) et tout autre al-
lumage (étincelles).
– Aérez soigneusement la pièce où se trouve lappa-
reil.
• Ne modifiez pas les spécifications de lappareil. Un
cordon dalimentation endommagé peut être la cause
de courts-circuits, dincendies et/ou de décharges
électriques.
Avertissement  Les composants électriques (cordon
dalimentation, prise, compresseur) doivent être
remplacés par un technicien d’entretien agréé ou par un
électricien spécialisé.
1. Lappareil ne doit pas être raccordé à laide dun
prolongateur, dune prise multiple ou dun rac-
cordement multiple (risque dincendie).
2. Assurez-vous que la prise nest pas écrasée ou
endommagée par larrière de lappareil. Une prise
de courant endommagée peut surchauffer et pro-
voquer un incendie.
3. Vérifiez que la prise murale reste accessible une
fois que linstallation est terminée.
4. Ne débranchez pas lappareil en tirant sur le câble,
particulièrement lorsque lappareil est tiré de son
logement.
5. Si la fiche du cordon dalimentation est desserrée,
ne la branchez pas dans la prise murale. Risque
délectrocution ou dincendie !
6. Nutilisez pas lappareil si le diffuseur de lam-
poule déclairage nest pas présent. 
5) pour léclai-
rage intérieur.
• Cet appareil est lourd. Faites attention en le déplaçant.
• Ne touchez pas avec les mains humides les surfaces
givrées et les produits congelés (risque de brûlure et
darrachement de la peau).
• Évitez une exposition prolongée de lappareil aux ray-
ons solaires.
•
Ampoules 
6) utilisées dans cet appareil sont des am-
poules spéciales dédiées uniquement à un usage avec
des appareils ménagers. Elles ne conviennent pas à
léclairage des pièces dune habitation.
Utilisation quotidienne
• Ne posez pas déléments chauds sur les parties en
plastique de lappareil.
• Ne stockez pas de gaz ou de liquides inflammables
dans lappareil (risque dexplosion).
5) Si le diffuseur est prévu
6) Si lampoule est équipée dun diffuseur déclairage.
10