Zanussi Zra 226 Cwo User Manual

11
3R]QiPN\NRFKUDQ
åLYRWQtKRSURVW
HGt
6\PEROQDYêURENXQHERMHKRREDOXXGiYiåH
VWtPWRYêURENHPQHO]H]DFKi]HWMDNRVGRPRYQtP
RGSDGHP-HQXWQpMHMRGYp]WGRVE
UQpKRPtVWD


SRP
$åHWH]DEUiQLWS
tSDGQêPQHJDWLYQtPGRSDG
$PQD


LQIRUPDFHRUHF\NODFLWRKRWRVSRW
HELþH]tVNiWH
QDPtVWQtPREHFQtP~
DGXVW
HGLVNXSUROLNYLGDFL
GRPiFtKRRGSDGXQHERYREFKRG
NGHMVWHWHQWR
VSRW
HELþ]DNRXSLOL2EDORYpPDWHULiO\
0DWHULiO\R]QDþHQpV\PEROHP MVRXUHF\NORYDWHOQp

NUHF\NODFL...

12
Contents
Safety information __ __ __ __ __ __ __ __ __ _ 12
Control panel _ __ __ __ __ __ __ __ __ __ __ _ 14
First use __ __ __ __ __ __ __ __ __ __ __ __ _ 14
Daily use  _ __ __ __ __ __ __ __ __ __ __ __ _ 15
Helpful hints and tips __ __ __ __ __ __ __ __ _ 16Care and cleaning __ __ __ __ __ __ __ __ __ _ 16
What to do if… __ __ __ __ __ __ __ __ __ __ _ 17
Technical data __ __ __ __ __ __ __ __ __ __ _ 18
Installation __ __ __ __ __ __ __ __ __ __ __ _ 18
Environmental concerns _ __ __ __ __ __...

13
Warning!Any electrical component (power cord, 
plug, compressor) must be replaced by a certified 
service agent or qualified service personnel.
Power cord must not be lengthened. 1.
Make sure that the power plug is not squashed or  2.
damaged by the back of the appliance. A squashed 
or damaged power plug may overheat and cause 
a fire.
Make sure that you have access to the mains plug  3.
of the appliance.
Do not pull the mains cable. 4.
If the power plug socket is loose, do not insert the  5.
power...

14
Control panel
First use
Control panel
1 Control panel
Temperature regulation knob
The knob is located on the right side of the 
compartment and used to regulate internal temperature.
Number “0” – Off UÊ
Lowest number – least cold internal temperature UÊ
Highest number – coldest internal temperature UÊ
12
1 Lamp
2 Temperature regulation knob
Internal light
It will be turned on when the door is opened and be 
turned off when the door is closed.
Cleaning the interior
Before using the appliance for the...

15
Daily use
Movable shelves
There are 17 positions in the compartment for the 
location of the movable shelves. All shelves are able to 
be moved to suitable positions.
1
1 Safety glass shelves
Positioning the door shelves
In order to store food or beverage with different sizes, 
the door shelves can be placed at different heights. 
Follow below process to adjust the shelves.
Step 1. Pull the shelf free.
Step 2. Select suitable position and press the shelf to 
two convex plates until it is totally...

16
Helpful hints and tips
Care and cleaning
Hints for fresh food refrigeration
To obtain the best performance:
Do not store warm food or evaporating liquids in the  UÊ
refrigerator
Do cover or wrap the food, particularly if it has a  UÊ
strong flavour 
Position food so that air can circulate freely around it UÊ
Hints for refrigeration
Useful hints:
Meat (all types): wrap in polythene bags and place on 
the glass shelf above the vegetable drawer.
For safety, store in this way only one or two days at the...

17
What to do if…
Caution!Before troubleshooting, disconnect the 
power supply.
Only a qualified electrician or competent person must 
do the troubleshooting that is not in this manual.Important!There are some sounds during normal use 
(compressor, refrigerant circulation).
If the malfunction shows again, contact the Service 
Centre.
These data are necessary to help you quickly and 
correctly. Write the necessary data here, refer to the 
rating plate.Model description...

Installation
Important
In order to reserve the required space around the 
refrigerator for ventilation, please keep 100mm 
distance between 2 sides and top of the wine 
refrigerator and the wall and 50mm distance 
betweenrear of refrigerator and the wall.
100
100100
50
 

20Unscrew and remove the bottom hinge pin, and  4.
replace in another hole.
Interchange two brackets and fit them. Replace both  5.
adjustable feet.
Unscrew and remove the top hinge pin, turn the top  6.
hinge over and replace the pin.
 
Transfer the door to the proper position. Ensure the  7.
door is level; insert the bottom hinge pin into the 
lower hole of the door and the top hinge pin into 
upper hole of the door. Then tighten the top hinge 
with three ”ange screws.
 
Move the front small plate from...