Yamaha Tyros 3 Service Manual

111 Tyros3
 INITIAL SETTING
  In case of NG
Supplement:
TG1 indicates Effect RAM of SWP51B Master (DM: IC505) 
and TG2 indicates Effect RAM of SWP51B Slave (DM: IC506).
Test 57 to 62
Factory Inspection only.
Test 63
Function: Factory Set
Description:
Restores the Tyros 3 to the factory initial setup. 
(Sets the initial data to the Flash ROM.)
Displayed Message:
 Selected screen
During execution
Supplement:
In this stage, the fl ag for initialization is raised only and 
initialization will be executed when...

Tyros3
11 2
Tu r nSW Name / DisplayNote Number
1 TYPE SELECT        C2 
2 MIC SETTING        C#2
3 SONG I             D2 
4 SONG II            D#2
5 SP1                E2 
6 SP2                F2 
7 REC                F#2
8 STOP               G2 
9 PLAY/PAUSE         G#2
10 REW                A2 
11 FF                 A#2
12 DEMO               B2 
13 VOCAL HARMONY      C3 
14 EFFECT             C#3
15 TALK               D3 
16 SONG III           D#3
17 SONG IV            E3 
18 SP3                F3 
19...

11 3 Tyros3
 FORMATTING HDD
1. While holding down the [F] button and [J] button, turn on the 
power switch.
2. The device information indication mode will be started and 
the following screen will be shown.
3. Press the [C] button to go to the internal HDD information 
indication screen. If unformatted, “UNFORMAT DISK” will 
be shown. If the HDD is formatted, the screen in procedure 5 
will be shown.
4. Press the [DEMO] button to execute formatting. “Formatting
…” will be indicated during formatting...

Tyros3
11 4
 SYSTEM RESET
There are two reset methods in the SYSTEM RESET display: Factory Reset and Custom Reset.
Factory Reset–Restoring the Factory Programmed Settings
This function lets you restore the status of the Tyros3 to the original factory settings.
1  Select the desired item to be restored by using [1pq]–[3pq] buttons and add a checkmark to it by pressing 
the [4 p] (MARK ON) button.
To remove the checkmark, press the [4q] (MARK OFF) button.
2  Press the [D] (FACTORY RESET) button to execute...

11 5 Tyros3
Custom Reset–Saving and Recalling Your Original Settings as a Single File
For the items below, you can save your Original Settings as a Single File for future recall.
1  Make all desired settings on the instrument.
2  Call up the operation display.
[FUNCTION] g [I] UTILITY g TAB [t][u] SYSTEM RESET
3  Press one of the [F]–[I] buttons to call up the relevant display for sav-ing your data
4  Use the TAB [t][u] buttons to select one of the tabs (other than the PRESET) to which your settings will...

Tyros3
11 6
 OS UPDATE
CAUTIONS
  • While updating the program software, do not turn off 
the power or do not pull out the USB memory.
  • It takes about 5 minutes to update the program 
software.
1 Preparation
Download the Tyros3 updated program from the 
download page on the YSISS home page to the USB 
memory.
(YSISS URL>>http://plaza.yamaha.co.jp/ysiss/
exindex.nsf)
(Insert the USB memory containing only the update 
program into the USB terminal of the Tyros3.)
Tools required for update:
USB memory...

11 7 Tyros3
2-2-4  Press the [START/STOP] button to start the installation.
 
2-2-5  When the installations are fi nished, the following screen 
is displayed on the LCD.
 
2-2-6  Turn the power off.
3  Verifying the program version
3-1  Turn the power on with the [C2#], [F2] and [G2#] keys 
(C2# major chord) pressed and held.
 
C2# G2#
F2
POWERON /    OFF
3-2 “TEST” display appears, and the test mode starts.
3-3  Press the [TEMPO+] button or turn the [DATA ENTRY] 
dial clockwise to display “001:...

Tyros3
11 8
 INITIALIZING INTERNET SETTINGS
The settings of the Internet function are not initialized when using the Initialize operation of the instrument; Internet settings must be 
initialized separately, as explained here. Initializing will reset to the default values not only the settings of the browser, but also all 
settings you have made in the Internet Settings displays (except for the cookies and bookmarks), including those related to Internet 
connection.
1  Press the INTERNET buttons to...

11 9 Tyros3
 DATA BACKUP
For maximum data security Yamaha recommends that you copy or save your important data to a USB storage device.
This provides a convenient backup if the internal memory is damaged.
1  Insert/connect the backup USB storage device (destination).
NOTE
Completing the backup/restore operation may take a few minutes.
2  Call up the operation display.
[FUNCTION] g [I] UTILITY g TAB [t] [u] OWNER
CAUTION
Move the Protected Songs which are saved to the USER display before restoring. If the...

Tyros3
120
 DISPLAY MESSAGES
[BOOTER]
Displayed message Meaning Progress/status How to service
Now loading. Please wait a while...Data is being loaded. Wait a 
while.The installer fi le is being loaded.
Media error! Media error!Installer fi le loading error (media error)
Failed in loading the installer fi le
Part of the media is damaged (I/O error)Replace the installation media and 
retry.
Installer program checksum error! Installer checksum error!Installer fi le loading error (checksum error)
Checksum in...