Yamaha Rmx 1 Manual
Here you can view all the pages of manual Yamaha Rmx 1 Manual. The Yamaha manuals for Musical Instrument are available online for free. You can easily download all the documents as PDF.
Page 21
23 RM1x Patternside Ú2 PN: 2NA-V260490 • PN 1/3Circuit Board
Page 22
RM1x 24 PN:2NA-V260490 Note: See parts list for details of circuit board component parts. See PANEL SWITCH TABLE on C2 of OVERALL CIRCUIT DIAGRAM. Ú2 • PN 2/3 Circuit Board• PN 3/3 Circuit Board to DM-CN8 to DM-CN2 TIME STRECH CLOCK SHIFTGATE TIME VEROCITY CUT OFF RESONANCE EG DECAYPITCH BENDVOLUME PatternsidePatternside Component side Component side
Page 23
25 RM1x 1.TEST PROGRAM ÔPR EPARATION S Measuring instruments: low frequency oscillator, frequency counte r, oscillos cope, volt meter (JIS- C curve), k eyboard amplifier, etc . Jigs : MIDI cable, floppy dis k (2HD, form atted), etc. ÔTE ST PROGRAM TEST No. TEST TEST RESULT A Ho w to enter the test program B Proceeding throug h the tests C Test prog ram C- 1 SYST EM RAM OK / NG C- 2 RA M Battery OK C- 3 LCD Vertical Stripes (by seconds) C- 4 LED light up Re d, green C- 5...
Page 24
![Page 24
26RM1x
A. HOW TO ENTER THE TEST PROGRAM
While pressing the [PATTERN], [PATT CHAIN]
and [UTIL] buttons, turn the power switch on.
The following message will appear on the LCD
.
Use the [F1] , [F2] , [F3] and [F4] switches to
select the appropriate test mode.
When the [F1] switch is pressed, the auto mode
test is entered.
When the [F2] switch is pressed, the manual
mode test is entered.
The [F3] switch is pressed, the “
C-24 Factory
Set”
is started.
The [F4] switch is pressed, the “
C-25 EXIT”...](http://img.usermanuals.tech/thumb/83/104312/w300_rmx-1-manual-1523460661_d-23.png "Page 24
26RM1x
A. HOW TO ENTER THE TEST PROGRAM
While pressing the [PATTERN], [PATT CHAIN]
and [UTIL] buttons, turn the power switch on.
The following message will appear on the LCD
.
Use the [F1] , [F2] , [F3] and [F4] switches to
select the appropriate test mode.
When the [F1] switch is pressed, the auto mode
test is entered.
When the [F2] switch is pressed, the manual
mode test is entered.
The [F3] switch is pressed, the “
C-24 Factory
Set”
is started.
The [F4] switch is pressed, the “
C-25 EXIT”...")
26RM1x A. HOW TO ENTER THE TEST PROGRAM While pressing the [PATTERN], [PATT CHAIN] and [UTIL] buttons, turn the power switch on. The following message will appear on the LCD . Use the [F1] , [F2] , [F3] and [F4] switches to select the appropriate test mode. When the [F1] switch is pressed, the auto mode test is entered. When the [F2] switch is pressed, the manual mode test is entered. The [F3] switch is pressed, the “ C-24 Factory Set” is started. The [F4] switch is pressed, the “ C-25 EXIT”...
Page 25
![Page 25
27 RM1x
Test End
After displaying the test result and the test will
be finished.
All the RAM data will be restored.
Press the [F4] switch to exit the tes t, press the
[+1] switch to proceed with the next test and
then the [ENTER] switch to execute the next
test.
C-2 RAM BATTERY TEST
This test checks that the voltage of the RAM
backup battery is greater than 2.9V and less
than 3.5V at the A / D input terminal of CPU.
Th e “
OK”
will be displayed when the voltage
is within the range.
Display...](http://img.usermanuals.tech/thumb/83/104312/w300_rmx-1-manual-1523460661_d-24.png "Page 25
27 RM1x
Test End
After displaying the test result and the test will
be finished.
All the RAM data will be restored.
Press the [F4] switch to exit the tes t, press the
[+1] switch to proceed with the next test and
then the [ENTER] switch to execute the next
test.
C-2 RAM BATTERY TEST
This test checks that the voltage of the RAM
backup battery is greater than 2.9V and less
than 3.5V at the A / D input terminal of CPU.
Th e “
OK”
will be displayed when the voltage
is within the range.
Display...")
27 RM1x Test End After displaying the test result and the test will be finished. All the RAM data will be restored. Press the [F4] switch to exit the tes t, press the [+1] switch to proceed with the next test and then the [ENTER] switch to execute the next test. C-2 RAM BATTERY TEST This test checks that the voltage of the RAM backup battery is greater than 2.9V and less than 3.5V at the A / D input terminal of CPU. Th e “ OK” will be displayed when the voltage is within the range. Display...
Page 26
![Page 26
28RM1x
C-5 PANEL SWI TCH TEST
Pres s t he pa ne l swit ch es co ns ec u tiv ely fro m t he
[F1] switch t o t he [ENTER] switch, according to
th e ord er in di ca te d b y th e L CD. Co nf ir m all
switches are working properly.
Confirm the 32 channel sounds generate.When it is normal, a piano tone is generated
while being press on the switch.
NG is di sp la yed wh en an o the r s witc h is pr es se d
a nd a pi an o ton e do es n ot ge ne ra te . Aft er th is,
th e tes t...](http://img.usermanuals.tech/thumb/83/104312/w300_rmx-1-manual-1523460661_d-25.png "Page 26
28RM1x
C-5 PANEL SWI TCH TEST
Pres s t he pa ne l swit ch es co ns ec u tiv ely fro m t he
[F1] switch t o t he [ENTER] switch, according to
th e ord er in di ca te d b y th e L CD. Co nf ir m all
switches are working properly.
Confirm the 32 channel sounds generate.When it is normal, a piano tone is generated
while being press on the switch.
NG is di sp la yed wh en an o the r s witc h is pr es se d
a nd a pi an o ton e do es n ot ge ne ra te . Aft er th is,
th e tes t...")
28RM1x C-5 PANEL SWI TCH TEST Pres s t he pa ne l swit ch es co ns ec u tiv ely fro m t he [F1] switch t o t he [ENTER] switch, according to th e ord er in di ca te d b y th e L CD. Co nf ir m all switches are working properly. Confirm the 32 channel sounds generate.When it is normal, a piano tone is generated while being press on the switch. NG is di sp la yed wh en an o the r s witc h is pr es se d a nd a pi an o ton e do es n ot ge ne ra te . Aft er th is, th e tes t...
Page 27
![Page 27
29 RM1x
Display Of Test Results
NG
Te st End
After displaying the test result when the check
to the [TAP] switch end and the test will be
f ini sh ed .
After Pressing the [F4] to exit the test, press the
[+1] switch to proceed with the next test and
then the [ENTER] swit ch to execute t he next test.
Refer to “
B PROCEEDING THROUGH THE
TESTS”
if the “
NG”
occurs while testing.
C-6 ENCODER 1
[F1
] TEST
Con fi rm th e En co de r c o rre sp on di ng to t he [F1]
switch are working properly...](http://img.usermanuals.tech/thumb/83/104312/w300_rmx-1-manual-1523460661_d-26.png "Page 27
29 RM1x
Display Of Test Results
NG
Te st End
After displaying the test result when the check
to the [TAP] switch end and the test will be
f ini sh ed .
After Pressing the [F4] to exit the test, press the
[+1] switch to proceed with the next test and
then the [ENTER] swit ch to execute t he next test.
Refer to “
B PROCEEDING THROUGH THE
TESTS”
if the “
NG”
occurs while testing.
C-6 ENCODER 1
[F1
] TEST
Con fi rm th e En co de r c o rre sp on di ng to t he [F1]
switch are working properly...")
29 RM1x Display Of Test Results NG Te st End After displaying the test result when the check to the [TAP] switch end and the test will be f ini sh ed . After Pressing the [F4] to exit the test, press the [+1] switch to proceed with the next test and then the [ENTER] swit ch to execute t he next test. Refer to “ B PROCEEDING THROUGH THE TESTS” if the “ NG” occurs while testing. C-6 ENCODER 1 [F1 ] TEST Con fi rm th e En co de r c o rre sp on di ng to t he [F1] switch are working properly...
Page 28
![Page 28
30RM1x
Display Of Test Results
OK
NG Not appearing
Test End
After displaying the test result the test will be finished.
After pressing the [F4] to exit the test, press the
[+1 ] switch to proceed with the next test and t he n
the [ENTER] switch to execute the next test.
Refer to “
B PROCEEDING THROUGH THE
TESTS”
if the “
NG”
occurs while testing.
C-19 FDD TEST
Insert the floppy disk (2HD, formatted) which is
set to “
p rot ec t of f”
position. Press the [ENTER]
to ex ec ut e th e write /r ea d te...](http://img.usermanuals.tech/thumb/83/104312/w300_rmx-1-manual-1523460661_d-27.png "Page 28
30RM1x
Display Of Test Results
OK
NG Not appearing
Test End
After displaying the test result the test will be finished.
After pressing the [F4] to exit the test, press the
[+1 ] switch to proceed with the next test and t he n
the [ENTER] switch to execute the next test.
Refer to “
B PROCEEDING THROUGH THE
TESTS”
if the “
NG”
occurs while testing.
C-19 FDD TEST
Insert the floppy disk (2HD, formatted) which is
set to “
p rot ec t of f”
position. Press the [ENTER]
to ex ec ut e th e write /r ea d te...")
30RM1x Display Of Test Results OK NG Not appearing Test End After displaying the test result the test will be finished. After pressing the [F4] to exit the test, press the [+1 ] switch to proceed with the next test and t he n the [ENTER] switch to execute the next test. Refer to “ B PROCEEDING THROUGH THE TESTS” if the “ NG” occurs while testing. C-19 FDD TEST Insert the floppy disk (2HD, formatted) which is set to “ p rot ec t of f” position. Press the [ENTER] to ex ec ut e th e write /r ea d te...
Page 29
![Page 29
31 RM1x
OUTPUT (L): 1 k Hz +/- 3. 0 Hz , Sin e wa ve
+2 +/- 2 dBm (1 0 k Hz l oa d),
Dis to rti on : l es s tha n 0. 5%
OUTPUT
(R) :less than -76 dBm
PHONES (
L) :5 +/- 2 dBm (33 ohm load),
Distortion : less than 0.5%
PHONES
(R):less than -68 dBm
The LCD d is pla y du rin g th e s o un d o u tpu t.
Display Of Test Results
Not appearing
Te st End
Press the [F4] switch to f ini sh the test .
After press the [F4] switch to exit the test, press
th e [ +1] switc h to pro c ee d wi th t...](http://img.usermanuals.tech/thumb/83/104312/w300_rmx-1-manual-1523460661_d-28.png "Page 29
31 RM1x
OUTPUT (L): 1 k Hz +/- 3. 0 Hz , Sin e wa ve
+2 +/- 2 dBm (1 0 k Hz l oa d),
Dis to rti on : l es s tha n 0. 5%
OUTPUT
(R) :less than -76 dBm
PHONES (
L) :5 +/- 2 dBm (33 ohm load),
Distortion : less than 0.5%
PHONES
(R):less than -68 dBm
The LCD d is pla y du rin g th e s o un d o u tpu t.
Display Of Test Results
Not appearing
Te st End
Press the [F4] switch to f ini sh the test .
After press the [F4] switch to exit the test, press
th e [ +1] switc h to pro c ee d wi th t...")
31 RM1x OUTPUT (L): 1 k Hz +/- 3. 0 Hz , Sin e wa ve +2 +/- 2 dBm (1 0 k Hz l oa d), Dis to rti on : l es s tha n 0. 5% OUTPUT (R) :less than -76 dBm PHONES ( L) :5 +/- 2 dBm (33 ohm load), Distortion : less than 0.5% PHONES (R):less than -68 dBm The LCD d is pla y du rin g th e s o un d o u tpu t. Display Of Test Results Not appearing Te st End Press the [F4] switch to f ini sh the test . After press the [F4] switch to exit the test, press th e [ +1] switc h to pro c ee d wi th t...
Page 30
32RM1x Keyboard Velocity setting = 100 Event Chase = OFF Set up Mod e = Pat ter n Mo de Song Number = 1 Rec. track = 1 Pat ter n Nu mb er = Pre se t 0 01 Section = A REC MODE = Step Rec. Singl e Track Recording Phrase Rec. Loop = ON Rec. Pre. Count = 1 Ber Tempo = 120.0 bpm Rhythm = 4 / 4 Transpose = 0 Jump Type = OFF C-25 EXIT W h en t he RM1x ex it s th e te st p ro gr am, th e RM1 X be co mes t he pla y mo de . W h en t his te st is executed, the following display will...