Yamaha Mx124 Instruction Manual
Here you can view all the pages of manual Yamaha Mx124 Instruction Manual. The Yamaha manuals for Music Mixer are available online for free. You can easily download all the documents as PDF.
Page 11
MX12/6, 20/6 — Owner’s Manual Applications9 Applications Example 1) Sound Reinforcement for a live performance Procedure qConnect line input devices or microphones to the INPUT jacks and connect a power amp, that is connected to the main speakers, to the ST OUT Jacks. wUse the GAIN Control on each channel to adjust the level of the input signal from the device or microphone that is connected to the input channel (refer to page 2), and use the Channel Fader to adjust the level of the output signal that is...
Page 12
MX12/6, 20/6 — Owner’s Manual 10Applications Example 2) Home Recording AUX 2 (POST) SEND INSERT I/O C-R/PHONES ST OUT INPUT (ST CH) GROUP OUT 4 3 2 1 LINE OUT LINE IN RETURN INPUT Procedure qConnect a tone generator, synthesizer, microphone, etc. to the INPUT jacks, and connect a master recorder such as an MD or CD to the ST OUT jacks. wConnect a computer’s audio card’s LINE IN jack to the GROUP 3, 4 jacks and connect a pair of powered speakers, etc. for monitoring to the GROUP 1, 2 jacks. eConnect the...
Page 13
MX12/6, 20/6 — Owner’s Manual Frequency response20Hz—20kHz +1dB, -3dB @+4dB, 600Ω (Input Gain control at minimum level) Total harmonic distortion
Page 14
MX12/6, 20/6 — Owner’s Manual 12Supplement Input Specifications Input Gain Input NominalInput level Connector typeconnectors Control impedance impedance Sensitivity *1 Nominal Max. before clipping MIC INPUT-60 5kΩ50-600Ω mics-80 dB (0.078mV) -60 dB (0.775mV) -40 dB (7.75mV) XLR-3-31 type *2(1-n *5) -16 -36 dB (12.3mV) -16 dB (123mV) +4 dB (1.23V) LINE INPUT-34 50kΩ600Ω lines-54 dB (1.55mV) -34 dB (15.5mV) -14 dB (155mV) Phone jack (TRS) *2(1-n *5) +10 -10 dB (245mV) +10 dB (2.45V) +30 dB (24.5V) ST...
Page 15
![Page 15
MX12/6, 20/6 — Owner’s Manual
Supplement13
Block and Level Diagrams
+30dB+30dB+20dB+20dB+10dB+10dB0dB0dB-10dB–10dB-20dB–20dB-30dB–30dB-40dB–40dB-50dB–50dB-60dB–60dB
CH INPUT LINE IN
GAIN Min.[+10dB]
CH INPUT MIC IN
GAIN Min.[-16dB]
CH INPUT LINE IN
GAIN Max.[-34dB]
CH INPUT MIC IN
GAIN Max.[-60dB]ST INPUT
GAIN Min.[+10dB] ST INPUT
GAIN Min.[+10dB]
ST INPUT
GAIN Max.[-34dB]Max. Before Clip
INSERT I/O [0dB]Max. Before Clip
TAPE IN [-10dBV]
FaderRETURN [+4dB]
CH & ST INPUT to GROUP/STEREO [0dB]
RETURN to...](http://img.usermanuals.tech/thumb/83/100942/w300_mx124-instruction-manual-1509734221_d-14.png "Page 15
MX12/6, 20/6 — Owner’s Manual
Supplement13
Block and Level Diagrams
+30dB+30dB+20dB+20dB+10dB+10dB0dB0dB-10dB–10dB-20dB–20dB-30dB–30dB-40dB–40dB-50dB–50dB-60dB–60dB
CH INPUT LINE IN
GAIN Min.[+10dB]
CH INPUT MIC IN
GAIN Min.[-16dB]
CH INPUT LINE IN
GAIN Max.[-34dB]
CH INPUT MIC IN
GAIN Max.[-60dB]ST INPUT
GAIN Min.[+10dB] ST INPUT
GAIN Min.[+10dB]
ST INPUT
GAIN Max.[-34dB]Max. Before Clip
INSERT I/O [0dB]Max. Before Clip
TAPE IN [-10dBV]
FaderRETURN [+4dB]
CH & ST INPUT to GROUP/STEREO [0dB]
RETURN to...")
MX12/6, 20/6 — Owner’s Manual Supplement13 Block and Level Diagrams +30dB+30dB+20dB+20dB+10dB+10dB0dB0dB-10dB–10dB-20dB–20dB-30dB–30dB-40dB–40dB-50dB–50dB-60dB–60dB CH INPUT LINE IN GAIN Min.[+10dB] CH INPUT MIC IN GAIN Min.[-16dB] CH INPUT LINE IN GAIN Max.[-34dB] CH INPUT MIC IN GAIN Max.[-60dB]ST INPUT GAIN Min.[+10dB] ST INPUT GAIN Min.[+10dB] ST INPUT GAIN Max.[-34dB]Max. Before Clip INSERT I/O [0dB]Max. Before Clip TAPE IN [-10dBV] FaderRETURN [+4dB] CH & ST INPUT to GROUP/STEREO [0dB] RETURN to...
Page 16
YAMAHA CORPORATION Pro Audio & Digital Musical Instrument Division P.O. Box 3, Hamamatsu, 430-8651, Japan V629990 R2 1 CP 16 NP Printed in Taiwan