Yamaha Mtx5d Manual

EN
Owner’s Manual 

MTX5-D Owner’s Manual2
The above warning is located on the top of the unit.
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol 
within an equilateral triangle is intended to 
alert the user to the presence of uninsulated 
“dangerous voltage” within the product’s 
enclosure that may be of sufficient magnitude 
to constitute a risk of electric shock to per-
sons.
The exclamation point within an equilateral 
triangle is intended to alert the user to the 
presence of important...

MTX5-D Owner’s Manual3
1.  IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!This product, when installed as indicated in the instructions 
contained in this manual, meets FCC requirements. Modifi-
cations not expressly approved by Yamaha may void your 
authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories 
and/or another product use only high quality shielded cables. 
Cable/s supplied with this product MUST be used. Follow all 
installation instructions....

MTX5-D Owner’s Manual4
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING 
* Please keep this manual in a safe place for future reference.
 WARNING
Always follow the basic precautions listed below to avoid  the possibility of serious injury or even death from 
electrical shock, short-circuiting, da mages, fire or other hazards. These precautions include, but are not limited 
to, the following:
• Do not place the power cord near heat sources such as heaters or radiators, and do not  excessively bend or...

MTX5-D Owner’s Manual5
NOTICE
To avoid the possibility of malfunction/ damage to the product, 
damage to data, or damage to other property, follow the notices 
below.
 Handling and Maintenance
• Do not use the device in the vicinity of a TV, radio, stereo 
equipment, mobile phone, or other electric devices. Other-
wise, the device, TV, or radio may generate noise.
• Do not expose the device to excessive dust or vibration, or 
extreme cold or heat (such as in direct sunlight, near a 
heater, or in a car...

MTX5-D Owner’s Manual6
Contents
PRECAUTIONS................................................................................................................ 4
Getting Started................................................................................................................7
Included items (please check) ................................................................................................ 7
Firmware versions...

MTX5-D Owner’s Manual7
Getting Started
Thank you for purchasing the Yamaha Matrix Processor MTX5-D. This manual will help you take 
full advantage of the superior functionality offered by the MTX5-D.  After you have read the manual, 
keep it in a safe place for reference when needed.
• MTX5-D Owner’s Manual (this document)
• Power cable
• Euroblock plugs (16-pi n, 3.50mm pitch) (2)
• Euroblock plugs (3-pin, with  tab, 5.08mm pitch) (16)
• Cable ties (16) Use MTX-MRX Editor to update the firmware of the...

MTX5-D Owner’s Manual8
Introducing the MTX5-D
 A signal processor suitable for small or mid-sized installed systems
The MTX5-D is a signal proces sor suitable for small or mid-
sized systems such as  retail establishments or banquet halls. In 
addition to a 34 ch. x 16 ch. matr ix mixer, it provides 3-band 
parametric EQ, compressor/gate,  auto gain control, eight pri-
ority duckers, and eight  feedback suppressors. For the output 
stages, it provides numerous hi gh-performance high-quality 
processors,...

MTX5-D Owner’s Manual9
Controls and Connectors
qSD memory card slot
You can insert an SD memory card here. Music or sound 
effects can be played back from an SD memory card contain-
ing audio files (MP3 files and  WAV files). Before you insert 
an SD memory card into the slot, or remove an SD memory 
card from the slot, remove the slot cover.
For details on SD memory card  handling, refer to page 22. 
For details on how to play back  audio files, refer to the 
MTX-MRX Editor User Guide.
w [INPUT PEAK]...

Controls and Connectors
MTX5-D Owner’s Manual10
qAC IN connector
Use the included power cord to supply power to this connec-
tor. First, connect the power cord to this device, and then 
insert the power cord plug into the AC outlet.
wGround screw
The supplied power cord has  a three-prong plug that will 
ground the device when plugge d into an appropriately 
grounded three-prong type AC ma ins outlet. In some cases, 
you may be able to reduce hum or interference by also con-
necting this screw to...