Yamaha Lpx 500 User Manual

Part Names and Functions
58
Control Panel
[MENU] button (p.20)
The menus turn on and off each time the 
[MENU] button is pressed.
 and  buttons (p.12, 21, 22, 25)
Press to select an item in the menu or help 
menu.
Press and hold the [SHIFT] button while 
pressing these buttons to correct keystone 
distortion of images.
 button (p.21, 22, 25)
Displays the line menu.
Pressing the   button while viewing the menu 
or the online help selects the menu item and 
proceeds to the next display.
 indicator (p.36)...

59
Appendices
Rear
Base
TRIGGER OUT port
When the projector power is turned 
on, 12 V DC is output from this 
port. When the projectors power is 
turned off, the output becomes 0 V 
to communicate the projectors 
power ON/OFF status to an 
external device.
Remote control light-
receiving area
(Setup Guide)
Receives signals from 
the remote control.
Main power switch 
(p.6)
Press to turn the main 
projector’s power on 
and off. When the power 
is off, the power 
consumption is 0 W.
Rear adjustable foot...

Part Names and Functions
60
Remote Control
Remote control light-
emitting area (Setup Guide)
Outputs infrared remote control 
signals.
[PATTERN] button (p.13)
Projects a test pattern for image 
adjustment.
The test pattern switches between 
Crosshatch 
→ Grayscale Pattern 
→ 
Off each time the button is pressed.
[ESCAPE] button (p.21, 22)
If pressed while a menu is being 
displayed, the display returns to the 
next-highest level.
 button (p.20, 22, 25)
When this button is pressed, the line 
menu...

61
Appendices
Glossary
Following is an explanation of some of the terms used in this guide which may be unfamiliar or which were 
not explained in the manual itself. Further information can be obtained by referring to other commercially-
available publications.
3-2 pull-down 
detection-type IP 
conversionThis function directly converts image sources that have been recorded in the same 24-frame 
format used for movies into 60-frame progressive signals. This allows data such as DVD 
software that has been...

Glossary
62
InterlacedA method of image scanning whereby the lines in a single image are divided into two sections 
or fields. The signal bandwidth used for interlaced scanning is approximately half that 
required for progressive scanning when images with the same still picture resolution are 
broadcast.
OffsetThe adjustment of minute changes in color that occur as result of factors such as differences 
in the equipment used to display images. It adjusts the coloration in darker ranges separately 
for R,...

63
Appendices
Index
General Terms
 indicator .............................. 36, 58
Adjustment Foot ................................ 11
Appearance ........................................ 56
Aspect ratio ........................................ 15
Automatic Adjustment of Computer 
Images ...................................... 17, 60
Auto power off ................................... 32
Battery compartment cover (Remote 
control) ........................... Setup Guide
Battery replacement period (Remote...

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or 
transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or 
otherwise, without the prior written permission of YAMAHA CORPORATION. No patent liability is 
assumed with respect to the use of the information contained herein. Neither is any liability assumed 
for damages resulting from the use of the information contained herein.
Neither YAMAHA CORPORATION nor its...

OWN
YAMAHA  ELECTRONICS  CORPORATION,  USA  6660  ORANGETHORPE  AVE.,  BUENA  PARK,  CALIF.  90620,  U.S.A.
YAMAHA  CANADA  MUSIC  LTD.  135  MILNER  AVE.,  SCARBOROUGH,  ONTARIO  M1S  3R1,  CANADA
YAMAHA  ELECTRONIK  EUROPA  G.m.b.H.  SIEMENSSTR.  22-34,  25462  RELLINGEN  BEI  HAMBURG,  F.R.  OF  GERMANY
YAMAHA  ELECTRONIQUE FRANCE  S.A.  RUE  AMBROISE  CROIZAT  BP70  CROISSY-BEAUBOURG  77312  MARNE-LA-VALLEE  CEDEX02,  FRANCE
YAMAHA  ELECTRONICS  (UK)  LTD.  YAMAHA  HOUSE,  200  RICKMANSWORTH  ROAD...

Connecting to a Video Source
Connecting to a Computer Setup
Screen Size and Setting-up Distance
Setting-up Methods
Battery Replacement Period and 
Using the Remote Control
Remote Control Operating Range
Before Using the Remote Control
Inserting the Batteries
Printed in Japan (English)
403257000
Essen SET UP GUIDE English-hyoshi 

The batteries are not inserted into the remote control at the time of purchase, so you need 
to insert them before the remote control can be used.
Inserting the Batteries
1
1
2Remove the battery compartment cover.
Insert the batteries.
Make sure the polarities of the batteries are 
correct.
Replace the battery compartment cover.
After inserting the tab of the battery cover, 
push the cover down until it clicks into place.
3
While pressing the cover here, lift the cover up.
     Before Using the Remote...