Yamaha Dvx S200 Owners Manual

							Types of Input Signals
77
Types of Input Signals
English
Note on digital signals that exceed 48 kHz
CinemaStation’s digital input jack can input a sampling
frequency up to 96 kHz. For details read the owner’s
manual of the device connected to the digital input jack.
Keep in mind the points below when inputting a digital
signal that exceeds 48 kHz.
• DSP Programs are not selectable. You can only listen tonormal 2-channel stereo from the Front Speakers.
• During playback, you cannot adjust the volume level of Center and Surround L/R Speakers.
• Depending on the “* Speaker Set” setting in the SET MENU, the Subwoofer may output sound.
Input signal information

  (Format)
Shows the input signal format. When the digital input
cannot be recognized, the mode is set to analog.
Input Signal Format Display
Analog Audio Analog
PCM Audio PCM
Dolby Digital Audio Dolby DGTL
DTS Audio DTS
Other Digital Signals Unknwn DGTL

 
(Audio Channels)
Shows the number of audio channels an input signal
contains (only when Dolby Digital or DTS is input).
For example, “in: 3/2/LFE” indicates 3 Front Channels,
2 Surround Channels and LFE.
“1+1” indicates Main + Sub in bilingual broadcasts or
other 2 channel audio, and MLT indicates 3-channel or
more multi-channel audio.

 
fs
Shows the frequency sampling of an input signal (only
when digital signal is input). If the sampling frequency
cannot be measured, “unknown” appears.

 
rate (bit rate)
Shows the amount of data an input signal contains per
second (only Dolby Digital and DTS). If the bit rate
cannot be measured, “unknown” appears.

 
flg (flag)
Shows a recognition signal (flag), in an input signal and
initiates an action (only Dolby Digital and DTS). If the
flag cannot be recognized, “None” appears.
014DVX-S200-en 04.3.1, 11:20 AM
77
 
						

							Types of Input Signals
78
Switching Input Modes
TV
CH
CINEMA
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CHTV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO
MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S200 WB56620
ON SCREEN MENU
TESTRETURN
STATUS
TV VOL VOLUMEMUTE
AMP
DVD/CD
VCRVIDEO 1
VIDEO 2
TUNER
MD/CD-R
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
•  It is possible to switch Input mode even if you press INPUT on CinemaSt\
ation for more than one second.
• When Input mode is set to AUTO and a Dolby Digital or DTS signal is input, the most suitable decoder \
is automatically
selected.
• The following happens when set to Input mode and DTS is played: — CinemaStation detects the DTS signal and automatically switch to DTS mod\
e ( t indicator lights up). Once DTS audio
finishes playback, the  t indicator may blink, and while it blinks only DTS audio can be played b\
ack. Immediately after
DTS audio finishes playback, if you want to play normal PCM audio, reset\
 the Input mode to AUTO.
— If the DTS signal is interrupted when you perform Search or Skip, the  t indicator may blink. If this condition continues
for over 30 seconds, the Input mode automatically changes from DTS to no\
rmal digital (PCM) and the  t goes out.
• Using “* Input Mode” in the SET MENU you can set whether to use th\
e Input mode specified previously when CinemaStation was turned on or return to AUTO.
• It is not possible to select ANLG with the DVD/CD Input Selection button.
• You cannot switch input modes when the input jack you select with the Inp\
ut Selection button can only accept an analog input signal.
• To play back DTS, set the Input mode to AUTO or DTS. Do not set it to ANLG. If you do, audio may not output or you may hear noise.
You can playback most sources without a problem with
the AUTO setting (factory default setting). Then depending
on your needs, you can select the priority level for digital
and analog input signals, and specify formats such as
DTS.
Press the Input Selection button for current input
source until the desired input mode appears in the
CinemaStation Display.
AUTO : Input signal can be selected in the order below.
1) Digital signal
2) Analog  signal
DTS : Only DTS can be played.
ANLG : Only analog signal can be played.
Learning about input modes, jacks and Input Selection
buttons
CinemaStation can receive signals from the VIDEO 1 (analog),
VIDEO 2 (analog), VCR (analog), MD/CD-R (analog), and
OPTICAL (digital) jacks of connected equipment. You can
assign a VIDEO 1, VIDEO 2, VCR or MD/CD-R input name to
the OPTICAL IN jack. This will allow you to use the VIDEO 1,
VIDEO 2, VCR or MD/CD-R button to input a device
connected to the OPTICAL IN jack (MD/CD-R is assigned in
the default setting.) Normally, an analog signal is input to the
VIDEO 1, VIDEO 2, VCR or MD/CD-R IN jack, and a digital
signal is input to the OPTICAL IN jack. However, by setting
the input mode to AUTO the input will be automatically
detected and you can then playback audio from the device you
want by simply pressing an Input Selection button.
Advice
Notes
Input
Selection
buttons
Notes
• U.K. and Europe models only have VIDEO instead of VIDEO 1 and VIDEO 2.
• VIDEO is used as VIDEO 1 in above models.
014DVX-S200-en 04.3.1, 11:20 AM
78
 
						

							79
Additional Features
Additional Features
English
Using the Sleep Timer
After a specified time the power automatically enters standby so you can
enjoy CinemaStation until you fall asleep.
TV
CH
CINEMA
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CHTV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO
MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S200 WB56620
ON SCREEN MENU
TESTRETURN
S TAT U S
TV VOL VOLUMEMUTE
AMP
DVD/CD
VCRVIDEO 1
VIDEO 2
TUNER
MD/CD-R
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
SLEEP
• You cannot link the sleep timer of the device that is playing, so make su\
re to set the sleep timer of each device separately.
• The Sleep Timer cancels if you press POWER on the Remote Control, press STANDBY/ON on CinemaStation or pull out the
power cord.
• Memory backup remembers the previous setting so you can use the same set\
ting next time.
Play the source.
Repeatedly press SLEEP and set the time to
enter standby mode.
The CinemaStation Display changes as shown below.
Once the Sleep Timer is set a SLEEP indicator lights up
in the CinemaStation Display.
SLEEP 120 min
SLEEP 90 min
SLEEP 60 min
SLEEP 30 min
SLEEP OFF
To cancel the Sleep Timer
Keep pressing SLEEP until SLEEP OFF appears in the
CinemaStation Display.
In a few seconds SLEEP OFF disappears. The CinemaStation
Display once again shows the DSP Program and the SLEEP
indicator disappears.
Advice
015DVX-S200-en 04.3.1, 11:20 AM
79
 
						

							80
Additional Features
Enjoying High-Quality Video
Progressive Scan (NTSC only)
The COMPONENT VIDEO jack on CinemaStation is compatible with
Progressive Scan. You can enjoy highly defined images without flicker when
connecting to a television that has a component video input jack compatible
with Progressive Scan.
Progressive Scan is available only for NTSC signal output. See pages
95 and 96,  “On Screen Menu Guide” .
• Before connecting make sure to turn off the television and CinemaStation power.
Connect the television.
Use a commercially available component video cable.
Start playing the DVD. See page 10, “Viewing a DVD”.
Press PROGRESSIVE on CinemaStation.
YPBPR
COMPONENT VIDEO
(480p/480i)(DVD ONLY)
MONITOROUT
IN OUT
DIGITAL AUDIO OPTICAL
SUBWOOFER
OUTSYSTEM
CONNECTOR
75   
UNBAL
FM
ANT
GND
AM
ANT
Y
P
B
PR
PROGRESSIVE
• If you play video with a 4:3 aspect ratio on a 16:9 wide television scre\
en, Progressive Scan may fill the screen top to bottom .
In this case, use the On Screen Menu to change to the screen display tha\
t matches your television. See pages 95 and 96,  “On
Screen Menu Guide”.
If you cannot adjust the size, turn off Progressive Scan. (Changes to interlace output.)
• When Progressive Scan is on, a video signal will only output from the CO\
MPONENT VIDEO. You can use the COMPONENT VIDEO jack and Progressive Scan only for DVD playback, so it is not poss\
ible to enjoy progressive playback
from other sources.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT YOU SWITCH THE CONNECTION TO
THE “STANDARD DEFINITION” OUTPUT. IF THERE ARE QUESTIONS REGARDING YOUR VIDEO MONITOR
COMPATIBILITY WITH THIS UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
This unit is compatible with the complete line of YAMAHA projectors, including the DPX-1, LPX-500, DPX-1000 and with the
YAMAHA PDM-1 plasma display.
Please...
Advice
The PROGRESSIVE
indicator lights up.
To cancel Progressive Scan
Press PROGRESSIVE to turn off the PROGRESSIVE indicator.
Note
015DVX-S200-en 04.3.1, 11:20 AM
80
 
						

							81
Additional Features
Additional Features
English
Protecting Your Children from Undesirable Material
Using Parental Control
You can cut a scene that you do not feel it is suitable for your children, or lock a
disc from being played.
CinemaStation allows you to set the level of Parental Control. It then checks the
level of a disc whose level has been set in advance and automatically decides if
the content is suitable for viewing by your children before playing.
Setting the Password and Parental Control Level
TV
CH
CINEMA
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CHTV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO
MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S200 WB56620
ON SCREEN MENU
TESTRETURN
STATUS
TV VOL VOLUMEMUTE
AMP
DVD/CD
VCRVIDEO 1
VIDEO 2
TUNER
MD/CD-R
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
g
h
gg
ON
SCREEN
• The default password is 0000.
• If the password you input is wrong, some menu items, such as Parental le\
vel or Disc Lock, are grayed out. Enter the correct
password.
• If you forget your password, press  s four times, instead of the Number buttons.
Advice
Press  w to select  “Enter PIN ”, then press  w.
Press 
w and  h a number of times to select
“ Access ”.
Press 
g to select  “Setup ”.
Press ON SCREEN.
Number
Number
buttonsProgram
View
Play Option
Search
Toolbar
Preferences
Setup
Access
TV
Language
Audio Menu
Features
Setup
Preferences
Toolbar
Disc lock
Parental level
Enter PIN
Change PIN
Access
TV
Language
* * * *
Disc lock
Parental level
Change PIN
Enter PIN
015DVX-S200-en 04.3.1, 11:20 AM
81
 
						

							82
Additional Features
TV
CH
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CH TV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO
MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S200 WB56620
ON SCREEN MENU
TESTRETURN
STATUS
TV VOL VOLUMEMUTE
SET MENU
ENTER
g
h
gg
ON
SCREEN
TV
CH
CINEMA
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CH TV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO
MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S200 WB56620
ON SCREEN MENU
TESTRETURN
STATUS
TV VOL VOLUMEMUTE
AMP
DVD/CD
VCRVIDEO 1
VIDEO 2
TUNER
MD/CD-R
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
g
h
gg
ON
SCREEN
Perform steps 1 to 5 in  “Setting the Password
and Parental Control Level ” on page 81.
Enter the new password (4 digits) again for
confirmation. Enter the new password (4 digits) with the
Number buttons. Enter the current password (4 digits) with the
Number buttons. Press  g to select Change PIN, then press  w.
Number
buttons
Change the password
Press ON SCREEN to turn off the On Screen
Menu. Press  w or  q and select control level (0 to 8).
0: Parental Control is set to off, and you can play all
discs.
1 to 7: You can play discs of same level or below the level
you set. The smaller the number the stricter Parental
Control is.
8: You can play all discs. Press  h and select  “Parental level ”.
Use the Number buttons to enter a password (4
digits).
Number
buttons
* * * *Enter PIN
Disc lock
Parental level
Change PIN
0
Enter PIN
Parental level
Disc lock
Change PIN
+3
Enter PIN
Parental level
Disc lock
Change PIN
Press ON SCREEN to turn off the On Screen
Menu.
015DVX-S200-en
04.3.1, 11:20 AM
82
 
						

							83
Additional Features
Additional Features
English
• The identification data of a disc that is played when the disc lock is o\
n is stored in CinemaStation’s memory. The next time the disc is
played the restriction method selected previously is applied. If you sel\
ect “Play once”, the next time the disc is played the s election
window will appear. However, if you select “Play always”, the next time the disc is played th\
e selection window will not appear . After
 appears on the screen, press s within about 10 seconds.
• The memory can only store identification data for up to 120 discs. If yo\
u play the 121st disc, the identification data of the  first disc
(oldest) will be erased from memory.
Locking a Disc
TV
CH
CINEMA
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CH TV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO
MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S200 WB56620
ON SCREEN MENU
TESTRETURN
STATUS
TV VOL VOLUMEMUTE
AMP
DVD/CD
VCRVIDEO 1
VIDEO 2
TUNER
MD/CD-R
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
g
h
gg
ON
SCREEN
When you are finished with the setting press the
ON SCREEN key and the On Screen Menu will
close. As long as a password is not entered playback will not be
possible.
Select Off if you do not want to lock. After pressing the  w key, press the  h key and
select On. Press the  h key a number of times and select the
disc lock.
Disc lock is a function that restricts the playback of a video
disc. Setting the disc lock to on enables the lock and
disables disc playback. However, each time a disc is
inserted, it is possible to play it by selecting a playback
restriction method “Play once” or “Play always”, then
entering your password.
Number
buttons
Off
Parental level
Disc lock
Enter PIN
OnDisc lock
Parental level
Enter PIN
Off
Advice
Perform steps 1 to 5 in 
“Setting the password
and Parental Control Level ” (Page 81).
Insert a disc.
A selection window with “Play once” and “Play always”
will appear on the TV screen.
After pressing the  w key enter a password using
the number keys.
Playback starts. Use the  h key or  g key to select  “Play once ” or
“ Play always ”.
How to enter a password and begin playback
015DVX-S200-en 04.3.1, 11:20 AM
83
 
						

							84
Operating Other Equipment with the CinemaStation Remote Control
Storing Manufacturer Codes in the Remote
Control
If you set the manufacturer code (a unique code assigned to each
manufacturer) in the CinemaStation Remote Control, you can operate a
connected television, VCR, CD or MD recorder with the Remote Control.
• Depending on the model, the Remote Control may not work, or only work wi\
th a limitednumber of functions. In this case, use the remote control that came with\
 the television, VCR,
CD or MD recorder.
Setting the Manufacturer Code
When a manufacturer code is set for the TV button, VCR
button or MD/CD-R button, you can begin using the
features described in  “Available Operations”  on page 85.
TV
CH
CINEMA
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CHTV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO
MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S200 WB56620
ON SCREEN MENU
TESTRETURN
STATUS
TV VOL VOLUMEMUTE
AMP
DVD/CD
VCRVIDEO 1
VIDEO 2
TUNER
MD/CD-R
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
TV
SHIFT
VCR
MD/CD-R
Make sure that you set the correct manufacturer
code.
With a manufacturer code set for the TV button, press the
button to turn the TV power on/off (standby), and check
that the setting is working correctly.
With a manufacturer code set for the VCR button or the
MD/CD-R button, press the button then the features
described in  “Available Operations”  on page 85, and
check that the setting is working correctly.
• The TV button has 299, the VCR button has 399 and the MD/CD-R
button has 499 as the factory default setting for manufacturer code.
While holding down SHIFT, enter the
manufacturer code (3 digits) of the device with
the Number buttons.
For details, refer to “ Manufacturer Code List ” on
pages 87 and 88.
When the setting succeeds, “Code Set OK” appears;
however, when it does not, “Code Set NG” appears in the
CinemaStation Display. If setting is unsuccessful,
perform steps 1 and 2 again.
When finished entering the code, release your finger from
SHIFT.
• Perform steps 1 to 2 while holding down SHIFT.
While holding down SHIFT, press TV, VCR or MD/
CD-R.
Each button can be assigned one manufacturer code.
• For the TV button you can only set a television manufacturer code and
for the VCR button or MD/CD-R button you can only set a VCR, CD
or MD recorder manufacturer code.
Number
buttons
016DVX-S200-en
04.3.1, 11:21 AM
84
 
						

							85
Operating Other Equipment with the CinemaStation Remote Control
Operating Other Equipment
 with the CinemaStation Remote Control
English
Available Operations
While you set the manufacturer code for the TV, MD/CD-R or VCR button,
you can use the following functions after you press the TV, MD/CD-R or VCR
button.
TV
CH
CINEMA
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CHTV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO
MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S200 WB56620
ON SCREEN MENU
TESTRETURN
STATUS
TV VOL VOLUMEMUTE
AMP
DVD/CD
VCRVIDEO 1
VIDEO 2
TUNER
MD/CD-R
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
When the Remote Control’s TV, VCR or MD/
CD-R button does not work even after
setting the device manufacturer code
Try again from step 1 and keep the following points in
mind.
• Make sure you select the Remote Control’s TV, VCR
or MD/CD-R button correctly when setting the
manufacturer code.
• If there are multiple manufacturer codes enter them in order.
• After reinserting batteries, try the steps again (within 2 minutes of reinserting).
(When reinserting batteries be careful not to press the
Remote Control buttons. If a manufacturer code has
been set for the TV, VCR or MD/CD-R button, it may
get deleted.)
To return to the factory default settings
While pressing SHIFT down as in step 2 Setting the
Manufacturer Code, enter 299 for TV, 399 for VCR and
499 for MD/CD-R. (Step 3 is not necessary.)
Maintaining manufacturer code settings
Replace batteries before they become unusable. When
the batteries wear out and you remove them, the custom
manufacturer code setting will stay in memory for about
2 minutes. Be careful because if more than 2 minutes
elapse the codes may be deleted. Also, at this time, be
careful not to accidentally press a Remote Control
button. This can delete the codes.
*1TV POWER
*
1TV Input Switch
Stop
Fast Forward
Pause
Playback
Video Channel Selection (+)
Press VCR or MD/CD-R before starting
operations.
*1TV Channel Selection (+)
*
1TV Channel Selection (-) Rewind
Video Channel Selection (-) *
1TV Volume (+)
*
1TV Volume (-)
VCR operation
*1While you set the TV manufacturer code for the TV button, you can operate your television.
016DVX-S200-en 04.3.1, 1:09 PM
85
 
						

							86
Operating Other Equipment with the CinemaStation Remote Control
TV
CH
CINEMA
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CHTV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO
MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S200 WB56620
ON SCREEN MENU
TESTRETURN
S TAT U S
TV VOL VOLUMEMUTE
AMP
DVD/CD
VCRVIDEO 1
VIDEO 2
TUNER
MD/CD-R
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
TV
CH
CINEMA
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CH TV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO
MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S200 WB56620
ON SCREEN MENU
TESTRETURN
STATUS
TV VOL VOLUMEMUTE
AMP
DVD/CD
VCRVIDEO 1
VIDEO 2
TUNER
MD/CD-R
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
TV operation
CD or MD recorder operation
Press POWER before starting operations.
Channel Selection (+) Channel Selection (-) *
2VCR Rewind Input Switch
Volume (+) Volume (-) *
2VCR Stop
*
2VCR Fast Forward
*
2VCR Pause
*
2VCR Playback
Track Selection/Elapsed Time Input Stop
Pause
Playback
Reverse Search
Reverse Skip Forward Search
Forward Skip
Press MD/CD-R or VCR before starting
operations.
*
2While you set the VCR manufacturer code for the VCR button or the MD/CD-R button, you can operate your VCR.
016DVX-S200-en
04.3.1, 11:21 AM
86