Yamaha Dvx S200 Owners Manual

							37
Playing Video and Music Discs
Playing Video and Music Discs
English
Playing a Super Audio CD
Using the TV screen, selected area and
tracks of the Super Audio CD can be
played back.
Turn on the TV and switch the input
source to this unit.
Insert the disc. (The track display
screen of the Multi-channel appears.)
Press j to display the area selection
screen.
Stereo
Multi-channel
CD-DA
Select Multi-channel, Stereo or CD-DA
area using  h and  g and press  w.
E.g.
When the disc contains Multi-channel,
Stereo and CD-DA areas.
• Area can be selected only when the Super Audio
CD is stopped.
• When “Multi-channel” or “Stereo” is selected, output is only from the speakers. (Only the sound
from the front channel is output from the
headphones.)
Select a track using  h and  g, and press
ENTER to start playback.
Notes
You can play MP3 music that was recorded onto a CD-R
or CD-RW by a computer.
If you use the CinemaStation to playback MP3 discs recorded on
a computer, each folder on the disc is designated an “Album”,
and each file in each folder a “Track”.
• CinemaStation is compatible with a bit rate range of 32, 64, 96, 128,
192 or 256 kbps. CinemaStation is also compatible with variable bit
rate encoded MP3 files.
• CinemaStation is compatible with a sampling frequency of 32, 44.1 or 48 kHz.
Repeat Play
You can use Track Repeat and Album Repeat to repeat your
favorite track and disc. See page 34,  “ Repeating a Disc or
Track (Repeat Play) ”.
Program Play
You can playback your favorite tracks in the order you want. See
page 31,  “Customizing Playback Order (Program Play) ”.
Playback status on the TV screen
You can check the playback status (e.g. disc type) along with the
total and elapsed playing time of the current track on the TV
screen.
• Depending on the way you assign folder or file names when you record the\
 MP3 disc, the CinemaStation may play tracks in a different order from the order they were recorded in.
• Depending on recording conditions, some discs cannot be played back.
Advice
Notes
Root : Album
(Folder)
: Track
(File)
MP3 Playback Features
009DVX-S200-en 04.3.1, 11:15 AM
37
 
						

							38
Listening to the Radio
Connecting the Antennas
CinemaStation includes an AM Loop Antenna and indoor FM Antenna. Use
the supplied antennas in areas with good radio wave reception. Connect
each antenna into its jack properly.
YPBPRCOMPONENT VIDEO(480p/480i)(DVD ONLY)MONITOROUT
IN OUT
DIGITAL AUDIO OPTICAL
SUBWOOFER
OUTSYSTEM
CONNECTOR75   
UNBAL
FM
ANT
GND
AM
ANT
• The AM Loop Antenna can be detached from its stand and attached to a wall.
• To improve reception, we recommend that you install an outdoor antenna. F\
or details, contact your local Yamaha sound products
service center.
• Install the supplied indoor FM Antenna and AM Loop Antenna away from this system.
• Even if you connect an outdoor AM antenna, be sure to still use the AM Loop Antenna.
Attach the Antenna to its stand.
Open the AM ANT and GND jack levers to
the right. Insert the AM Loop Antenna’s
cord cores into the AM ANT and GND
jacks. Close the lever to fasten the cord.
Pull the cord lightly to make sure it is properly
fastened.
Adjust the Antenna left and right and find
the best position for reception.
Cord Core
Lever
Connecting the FM Antenna
Connect the supplied indoor FM Antenna to the FM
ANT jack.
When connecting an outdoor FM
antenna
Use the antenna’s coaxial cable and a commercially
available F-type connector to connect the antenna to the FM
ANT jack. For details, ask the shop where you bought the
outdoor antenna.
Earth (GND jack)
The GND jack does not provide secure grounding. However when there
is a lot of noise, connecting it may improve reception. To ground
CinemaStation, connect one end of a vinyl coated wire to the GND jack
and the other end to a commercially available grounding rod or copper
sheet, and bury the rod or sheet in damp earth.
Connecting the AM Loop Antenna
Advice
Notes
Indoor FM Antenna
(supplied)
AM Loop
Antenna
(supplied)
White Black AM ANT jack
GND jack
010DVX-S200-en 04.3.1, 11:16 AM
38
 
						

							39
Listening to the Radio
Listening to the Radio
English
Listening to the Radio
CinemaStation provides several methods for tuning radio stations to help you
find channels as easy as you can.
INPUT
Press PRESET/BAND to select either FM or AM.
Each time you press, the mode changes in the order as
follows: FM (Tuning mode) → AM (Tuning mode)  →
(Preset mode)  → FM (Tuning mode)  → ...PRESET/BAND
AUTO/MAN’L
d
 PRESET/TUNING
PRESET/TUNING  u
Selecting the Radio Tuner
Press INPUT repeatedly on CinemaStation until TUNER
appears. The input source changes to Tuner (Radio) and
you can listen to AM/FM broadcasts.
• You can also press TUNER on the Remote Control to change the input
source to Tuner.
Advice
Display
Selecting Radio Stations
You have two ways to select radio stations, Auto Tuning
and Manual Tuning. Auto Tuning is quick and handy to use
when radio signal reception is strong.
Select stations automatically (Auto Tuning)
• If the colon (:) beside the Band indicator goes out, that meansCinemaStation is in Tuning mode. Make sure the colon (:) is not lit
up.
Advice
Press AUTO/MAN ’L to set CinemaStation to Auto
Tuning mode.
When CinemaStation is set to Auto Tuning mode, the
AUTO indicator lights up in the CinemaStation Display.
Press PRESET/TUNING  u/d  to select the radio
station you want to receive.
Press  u to search for high-frequency stations or press  d
to search for low-frequency stations.
Display
Preset number Band
Preset
group Colon* Frequency
* Goes out in Tuning mode, lights up in Preset mode.
010DVX-S200-en 04.3.1, 11:16 AM
39
 
						

							40
Listening to the Radio
PRESET/BAND
AUTO/MAN ’L
d
 PRESET/TUNING
PRESET/TUNING  uFor stations with weak radio signals, tune manually.
• If the radio waves are weak and Auto Tuning doesn’t work, tune manually (Manual Tuning).
• When Auto Tuning finds a radio station, the TUNED indicator lights up and the frequency appears.
• Manually tuning in to an FM station will automatically change the recept\
ion mode to monaural to increase the signal quality.
Select your favorite stations by hand (Manual Tuning)
Perform step 1 in “Select stations automatically
(Auto Tuning) ” on page 39.
Press AUTO/MAN ’L to set CinemaStation to
Manual Tuning  mode.
When CinemaStation is set to Manual Tuning mode, the
AUTO indicator goes out from the CinemaStation
Display.
Press PRESET/TUNING  u/d  to select the radio
station you want to receive.
Hold down the button to continue the tuning search.
Advice
Display
010DVX-S200-en 04.3.1, 11:16 AM
40
 
						

							41
Listening to the Radio
Listening to the Radio
English
Up to 40 stations (5 Groups ✕ 8 Stations) can be automatically
preset.PRESET/BAND
A/B/C/D/E
MEMORY
AUTO/MAN’L
PRESET/TUNING  u
d  PRESET/TUNING
Setting Channels in Advance (Preset)
Presetting radio stations in memory helps you tune the
preset radio stations using a few simple button operations.
Automatically preset FM stations in advance (Auto Preset)
Press PRESET/BAND to select FM.
Press AUTO/MAN ’L to make the AUTO indicator
light up.
Keep pressing MEMORY down for about 3
seconds.
The Preset Number, MEMORY and AUTO indicators
blink. After a few seconds, Auto Preset starts at the
frequency currently displayed toward the higher
frequency.
When Auto Preset finishes the frequency of the last radio
station memorized appears.
Customizing Auto Preset method
You can specify the Preset Group or number to start
tuning. You can also start Auto Tuning at the frequency
currently displayed toward either the lower or higher
frequency.
Perform steps 1 and 2 above, in  “Automatically
preset FM stations in advance (Auto Preset) ”.
Press MEMORY for about 3 seconds, then press
A/B/C/D/E and PRESET/TUNING  u/d  to select
the Preset Number you want to memorize first.
Auto Preset will stop when the number memorized
reaches 40 radio stations.
Press PRESET/BAND to turn off the colon (:),
then press PRESET/TUNING  u/d .
When pressing  d, Auto Preset starts at the frequency
currently displayed toward the lower frequency, and when
pressing  u, Auto Preset starts at the frequency currently
displayed toward the higher frequency.
Display
010DVX-S200-en 04.3.1, 11:16 AM
41
 
						

							42
Listening to the Radio
You can manually preset up to 40 radio stations.A/B/C/D/E
MEMORY
PRESET/TUNING  u
d  PRESET/TUNING
• When presetting a radio station, you can set the frequency and reception\
 mode (stereo/monaural) at the same time.
• You can change the order of preset FM radio stations later. See page 43,  “Changing the Order of Preset Stations ”.
• If the number of radio stations that have been preset is less than 40, Auto Preset automatically stops after searching the who le
frequency range.
• If a new radio station is preset for a Preset Number, the previously preset station for the Preset Number is deleted.
• In Auto Preset, only FM radio stations with a strong signal are set. To preset radio stations with a weak signal set reception  mode
to monaural and preset manually.
Manually preset stations in advance (Manual Preset)
Select radio stations you want to preset.
See page 39,  “Selecting Radio Stations ”.
The frequency and broadcast band (FM or AM) of the
tuned-in station appear in the CinemaStation Display.
Press MEMORY.
The MEMORY indicator blinks for about 5 seconds in the
CinemaStation Display, which means CinemaStation is
ready to preset.
While the MEMORY indicator is blinking, press
A/B/C/D/E to select the Preset Group (A to E).
The Group appears. Check that the colon (:) beside the
band indicator lights up.
While the MEMORY indicator is blinking, press
PRESET/TUNING  u/d  to select a Preset Number
(1 to 8).
Press  u for a larger number and  d for a smaller number.
While the MEMORY indicator is blinking, press
MEMORY.
The selected Preset Group and Number, broadcast band
(FM or AM) and frequency appear in the CinemaStation
Display.
Repeat steps 1 to 5 to manually preset other
radio stations.
Advice
Notes
Display
010DVX-S200-en 04.3.1, 11:16 AM
42
 
						

							43
Listening to the Radio
Listening to the Radio
English
You can tune in a radio station simply by selecting its
Preset Number.
Start operations after first pressing TUNER.
TV
CH
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CH TV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO
MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S200 WB56620
ON SCREEN MENU
TESTRETURN
STATUS
TV VOL VOLUMEMUTE
AMP
DVD/CD
VCRVIDEO 1
VIDEO 2
TUNER
MD/CD-R
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
A/B/C/D/E
u PRESET
PRESET d
TUNER
PRESET/TUNING 
u
PRESET/BAND
d PRESET/TUNING
Selecting a Preset Station (Preset Tuning)
Changing the Order of Preset Stations
Press A/B/C/D/E repeatedly to select the
station ’s Preset Group.
The Preset Group that appears in the CinemaStation
Display changes each time you press A/B/C/D/E.
Press PRESET  u/d  to select the Preset Number.
The Preset Group and Number, broadcast band (FM or
AM) and frequency appear in the CinemaStation Display
with the TUNED indicator lit up.
• You can also perform Preset Tuning by repeatedly pressing A/B/C/D/E
and PRESET/TUNING  u/d  on CinemaStation.
Advice
You can also change the order of preset stations.
Below is an example of the steps for switching the E1 and
A5 radio stations.
Tune in the radio station preset to E1.
Review the procedure above, “Selecting a Preset Station
(Preset Tuning)”.
Press PRESET/BAND for about 3 seconds.
E1 and the MEMORY indicator will blink in the
CinemaStation Display.
Tune in the radio station preset to A5 using A/B/
C/D/E and PRESET/TUNING  u/d .
A5 and the MEMORY indicator will blink in the
CinemaStation Display.
Press PRESET/BAND.
“EDIT E1-A5” will appear in the CinemaStation Display
and the preset stations will exchange places.
010DVX-S200-en 04.3.1, 11:16 AM
43
 
						

							44
Listening to the Radio
TV
CH
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CH TV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO
MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S200RDS WB56630
ON SCREEN MENU
TESTRETURN
STATUS
TV VOL VOLUMEMUTE
SET MENU
ENTER
MODE STARTPTY SEEKFREQ/RDSu
 PRESET
PTY SEEK
START
PRESET 
d
FREQ/RDS
PTY SEEK
MODE
Receiving RDS Stations (U.K. and Europe models only)
RDS (Radio Data System) is a transmission system for
FM stations used in many countries.
RDS transmissions contain various types of information,
including PS (Program Service), PTY (Program Type),
RT (Radio Text), and CT (Clock Time). RDS works
through cooperation among broadcasting stations.
FREQ/RDS
Press this button when receiving an RDS station to switch
between frequency and RDS mode. The RDS mode
display may include PS, PTY, RT and CT, depending on
the information a radio station provides.
PTY SEEK MODE
Press this button to set the program type to search for.
PTY SEEK START
Once the program type has been selected in PTY SEEK
mode, press this button to begin the search.
PTY (Program Type)
RDS Modes
RDS supports four types of information: PS, PTY,
RT and CT.
PS (Program Service)
Shows the name of the RDS station broadcasting.
PTY (Program Type)
Divides RDS broadcasts into the 15 genres shown
at right.
RT (Radio Text)
Shows RDS broadcast information (including song
title, artist name) using up to 64 letters and numbers
plus the umlaut letter. If the radio text contains
other characters, they will appear with an underbar.
CT (Clock Time)
Shows the current time updated once a minute. If
data flow is interrupted, CT WAIT will appear. NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
M.O.R. M
LIGHT M
CLASSICS
OTHER MNews
Current Affairs
General Information
Sports
Education
Drama
Culture
Science
Light Entertainment
Pops
Rock
Middle-Of-the-Road Music (easy-listening)
Light Classics
Serious Classics
Other Music
U.K. and Europe models
011DVX-S200-en
04.3.1, 11:17 AM
44
 
						

							45
Listening to the Radio
Listening to the Radio
English
Change RDS Mode
There are four RDS display modes. When an RDS
station is broadcasting, PS, PTY, RT or CT mode
indicators corresponding to the services provided
light up in the CinemaStation Display. Press
FREQ/RDS repeatedly to change among the
modes supported by the currently tuned RDS
station.Notes
• When an RDS station is broadcasting, do not press FREQ/RDS untilone or more mode indicators light up in the CinemaStation Display. If
you press FREQ/RDS before the mode indicators light up,
CinemaStation may not be able to change modes.
• RDS information not provided by a station cannot be selected.
• If the RDS station’s signal transmission is too weak, CinemaStation may not be able to use the service fully. In particular, radio text uses a
lot of bandwidth, so it may not be available even when other modes
are selectable.
• RDS information may not transmit under poor conditions. In this case, press AUTO/MAN’L to set CinemaStation to Manual Tuning
mode. This changes reception to monaural and may help RDS
information reappear when you switch to RDS display mode.
• If outside interference disrupts an RDS station broadcast, RDS information may suddenly disappear and “...WAIT ” appears in the
CinemaStation Display.
About PTY SEEK
Press PTY SEEK MODE to set CinemaStation to
PTY SEEK mode.
The program type of the tuned in station or NEWS blinks
in the CinemaStation Display.
Press PTY SEEK START to start searching all
preset RDS stations.
The selected program type flashes and the PTY HOLD
indicator lights up while the search is in progress.
If the search finds a station that matches the program type
you selected, CinemaStation will tune it in.
If the station tuned in is not the one you want press PTY
SEEK START again to continue the search for other
stations broadcasting the program type you selected. Press PRESET  u/d  to select the program type
you want.
Your program type selection appears in the
CinemaStation Display.
When you select the program type, CinemaStation automatically
searches through all preset stations currently broadcasting for
that type.
To cancel steps 1 or 2
Press PTY SEEK MODE twice.
PS
PTY
RT
CT
RDS mode OFF
011DVX-S200-en
04.3.1, 11:17 AM
45
 
						

							46
Using Other Equipment
Connecting Video  Equipment
Connect a VCR to CinemaStation to play or dub videos. You can also
connect a game console or video camera.
Connecting a Game Console or VCR
•Always read the owner’s manual of any equipment you want to connect.
VIDEOYPBPR
S VIDEO(DVD ONLY)COMPONENT VIDEO(480p/480i)(DVD ONLY)
MONITOROUT
IN OUT
VIDEO 1 VCR VIDEO 2 MD/CD-R
DIGITAL AUDIO OPTICAL
SUBWOOFER
OUTSYSTEM
CONNECTOR
R L75   
UNBAL
FM
ANT
GND
AM
ANT
OUT
IN
IN
OUT
IN
IN
VIDEO
DIGITAL OPTICAL
OUTPUT
OUTPUT
L
R L
R
AUDIO VIDEO
L
R L
R
AUDIO VIDEO
AUDIO VIDEO
L
R AUDIOVIDEO
INPUT OUTPUT1 OUTPUT2 INPUT1 INPUT2
Please...
TV
Connection Cables
VCR
Game console or video camera
Or CinemaStation
Use a commercially available Audio/Video cable.
Use the supplied Video Pin Cable.
Audio/Video cable
(commercially available)
Video Pin Cable (supplied)
When directly
connecting the TV
with the VCR, you can play video tape on theVCR even if you turn off CinemaStation.
Use a commercially available optical cable
Optical cable (commercially available)
The cable can be connected to either a VIDEO 1 or VIDEO 2 jack.
(Only VIDEO jacks are available on U.K. and Europe models.)
011DVX-S200-en 04.3.1, 11:17 AM
46