Yamaha Dvx S120 Owners Manual

							Types of Input Signals
77
Types of Input Signals
Switching Input Modes
TV
CH
CINEMA
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CHTV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S120 WB56650
ON SCREEN MENU
TESTRETURN
STATUS
TV VOLVOLUMEMUTE
AMP
DVD/CD
VCRVIDEO
TUNER
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
•  It is possible to switch Input mode even if you press INPUT on CinemaStation for more than one second.
• When Input mode is set to AUTO and a Dolby Digital or DTS signal is input, the most suitable decoder is automatically
selected.
• The following happens when set to Input mode and DTS is played:
— CinemaStation detects the DTS signal and automatically switch to DTS mode (t indicator lights up). Once DTS audio
finishes playback, the t indicator may blink, and while it blinks only DTS audio can be played back. Immediately after
DTS audio finishes playback, if you want to play normal PCM audio, reset the Input mode to AUTO.
— If the DTS signal is interrupted when you perform Search or Skip, the t indicator may blink. If this condition continues
for over 30 seconds, the Input mode automatically changes from DTS to normal digital (PCM) and the t goes out.
• Using “* Input Mode” in the SET MENU you can set whether to use the Input mode specified previously when CinemaStation
was turned on or return to AUTO.
• It is not possible to select ANLG with the DVD/CD Input Selection button.
• You cannot switch input modes when the input jack you select with the Input Selection button can only input an analog input
signal.
• To play back DTS, set the Input mode to AUTO or DTS. Do not set it to ANLG. If you do, audio may not output or you may
hear noise.
You can playback most sources without a problem with
the AUTO setting (factory default setting). Then depending
on your needs, you can select the priority level for digital
and analog input signals, and specify formats such as
DTS.
Press the Input Selection button for current input
source until the desired input mode appears in the
CinemaStation Display.
AUTO: Input signal can be selected in the order below.
1) Digital signal
2) Analog  signal
DTS: Only DTS can be played.
ANLG: Only analog signal can be played.
Learning about input modes, jacks and Input Selection
buttons
CinemaStation can receive signals from the VIDEO (analog),
VCR (analog) and OPTICAL (digital) jacks of equipment that
is connected to it. You can assign a VIDEO or VCR input name
to the OPTICAL IN jack. This will allow you to use the VIDEO
button or VCR button to input a device connected to the
OPTICAL IN jack (VIDEO is assigned in the default setting.)
Normally, an analog signal is input to the VIDEO or VCR IN
jack, and a digital signal is input to the OPTICAL IN jack.
However, by setting the input mode to AUTO the input will be
automatically detected and you can then playback audio from
the device you want by simply pressing an Input Selection
button.
Advice
Note
Input
Selection
buttons
English
014DVX-S120-en03.8.5, 1:48 PM 77
 
						

							78
Additional Features
Using the Sleep Timer
After a specified time the power automatically enters standby so you can
enjoy CinemaStation until you fall asleep.
TV
CH
CINEMA
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CHTV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S120 WB56650
ON SCREEN MENU
TESTRETURN
STATUS
TV VOLVOLUMEMUTE
AMP
DVD/CD
VCRVIDEO
TUNER
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
SLEEP
• You cannot link the sleep timer of the device that is playing, so make sure to set the sleep timer of each device separately.
• The Sleep Timer cancels if you press POWER on the Remote Control, press STANDBY/ON on CinemaStation or pull out the
power cord.
• Memory backup remembers the previous setting so you can use the same setting next time.
Play the source.
Repeatedly press SLEEP and set the time to
enter standby mode.
The CinemaStation Display changes as shown below.
Once the Sleep Timer is set a SLEEP indicator lights up
in the CinemaStation Display.
SLEEP 120 min
SLEEP 90 min
SLEEP 60 min
SLEEP 30 min
SLEEP OFF
To cancel the Sleep Timer
Keep pressing SLEEP until SLEEP OFF appears in the
CinemaStation Display.
In a few seconds SLEEP OFF disappears. The CinemaStation
Display once again shows the DSP Program and the SLEEP
indicator disappears.
Advice
015DVX-S120-en03.8.5, 1:49 PM 78
 
						

							79
Additional Features
Additional Features
Enjoying High-Quality Video
Progressive Scan (NTSC only)
The COMPONENT VIDEO jack on CinemaStation is compatible with
Progressive Scan. You can enjoy highly defined images without flicker when
connecting to a television that has a component video input jack compatible
with Progressive Scan.
Progressive Scan is available only for NTSC signal output. See pages
94 and 95, “On Screen Menu Guide”.
• Before connecting make sure to turn off the television and CinemaStation power.
Connect the television.
Use a commercially available component video cable.
Start playing the DVD. See page 10, “Viewing a DVD”.
Press PROGRESSIVE on CinemaStation.
DIGITAL
AUDIO VIDEO S VIDEO
IN VCR
OUT Y
P
B
PR
MONITOR
OUT
MONITOR
OUT
(DVD ONLY)
MONITOR
OUT(DVD ONLY)
VCR
IN VIDEO
INCOMPONENT
VIDEOOUT
OPTICAL
Y
P
B
PR
PROGRESSIVE
• If you play video with a 4:3 aspect ratio on a 16:9 wide television screen, Progressive Scan may fill the screen top to bottom.
In this case, use the On Screen Menu to change to the screen display that matches your television. See pages 94 and 95, “On
Screen Menu Guide”.
If you cannot adjust the size, turn off Progressive Scan. (Changes to interlace output.)
• When Progressive Scan is on, a video signal will only output from the COMPONENT VIDEO. You can use the
COMPONENT VIDEO jack and Progressive Scan only for DVD playback, so it is not possible to enjoy progressive playback
from other sources.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT YOU SWITCH THE CONNECTION TO
THE “STANDARD DEFINITION” OUTPUT. IF THERE ARE QUESTIONS REGARDING YOUR VIDEO MONITOR
COMPATIBILITY WITH THIS UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
This unit is compatible with the complete line of YAMAHA projectors, including the DPX-1, LPX-500, DPX-1000 and with the
YAMAHA PDM-1 plasma display.
Please...
Advice
Note
The PROGRESSIVE
indicator lights up.
To cancel Progressive Scan
Press PROGRESSIVE to turn off the PROGRESSIVE indicator.
English
015DVX-S120-en03.8.5, 1:49 PM 79
 
						

							80
Additional Features
Protecting Your Children from Undesirable Scene
Using Parental Control
You can cut a scene that you do not feel it is suitable for your children, or lock a
disc from being played.
CinemaStation allows you to set the level of Parental Control. It then checks the
level of a disc whose level has been set in advance and automatically decides if
the content is suitable for viewing by your children before playing.
Setting the Password and Parental Control Level
TV
CH
CINEMA
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CHTV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S120 WB56650
ON SCREEN MENU
TESTRETURN
STATUS
TV VOLVOLUMEMUTE
AMP
DVD/CD
VCRVIDEO
TUNER
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
g h d
gg
ON
SCREEN
• The default password is 0000.
• If the password you input is wrong, some menu items, such as Parental level or Disc Lock, are grayed out. Enter the correct
password.
• If you forget your password, press s four times, instead of the Number buttons.
Advice
Press g to select “Enter PIN”, then press w. Press w and h a number of times to select
“Access”. Press g to select “Setup”. Press ON SCREEN.
Number
Number
buttonsProgram
View
Play Option
Search
Toolbar
Preferences
Setup
Access
TV
Language
Audio Menu
Features
Setup
Preferences
Toolbar
Disc lock
Parental level
Enter PIN
Change PIN
Access
TV
Language
* * * *
Disc lock
Parental level
Change PIN
Enter PIN
015DVX-S120-en03.8.5, 1:49 PM 80
 
						

							81
Additional Features
Additional Features
TV
CH CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CHTV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S120 WB56650
ON SCREEN MENU
TESTRETURN
STATUS
TV VOLVOLUMEMUTE
SET MENU
ENTER
g h d
gg
ON
SCREEN
TV
CH
CINEMA
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CHTV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S120 WB56650
ON SCREEN MENU
TESTRETURN
STATUS
TV VOLVOLUMEMUTE
AMP
DVD/CD
VCRVIDEO
TUNER
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
g h d
gg
ON
SCREEN
Perform steps 1 to 5 in “Setting the Password
and Parental Control Level” on page 80.
Enter the new password (4 digits) again for
confirmation. Enter the new password (4 digits) with the
Number buttons. Enter the current password (4 digits) with the
Number buttons. Press g to select Change PIN, then press w.
Number
buttons
Change the password
Press ON SCREEN to turn off the On Screen
Menu. Press w or q and select control level (0 to 8).
0: Parental Control is set to off, and you can play all
discs.
1 to 7: You can play discs of same level or below the level
you set. The smaller the number the stricter Parental
Control is.
8: You can play all discs. Press h and select “Parental level”. Use the Number buttons to enter a password (4
digits).
Number
buttons
* * * *Enter PIN
Disc lock
Parental level
Change PIN
0
Enter PIN
Parental level
Disc lock
Change PIN
+3
Enter PIN
Parental level
Disc lock
Change PIN
Press ON SCREEN to turn off the On Screen
Menu.
English
015DVX-S120-en03.8.5, 1:49 PM 81
 
						

							82
Additional Features
• If you enter a password you can play back the disc even when Disc Lock is on.
1 Insert the disc.
2 Select “Play once” or “Play always” with h or g.
3 Press w, then once you enter the password with the Number buttons, playback starts.
• You can set “Disc lock” to “On” for up to 120 discs.
Locking a Disc
TV
CH
CINEMA
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CHTV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S120 WB56650
ON SCREEN MENU
TESTRETURN
STATUS
TV VOLVOLUMEMUTE
AMP
DVD/CD
VCRVIDEO
TUNER
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
g h d
gg
ON
SCREEN
Press ON SCREEN to turn off the On Screen
Menu. Playback is locked for that disc and disabled unless you
enter the password.
Select “Off” if you do not want to lock. Press w to select “On”. Press h repeatedly to select “Disc Lock”. Perform steps 1 to 5 in “Setting the Password
and Parental Control Level” on page 80. CinemaStation locks a disc by storing its ID code in
memory. So the next time the disc is inserted the user is
prompted to enter a password to unlock the disc. Enter the
password correctly to load the disc.
Number
buttons
Off
Parental level
Disc lock
Enter PIN
OnDisc lock
Parental level
Enter PIN
Off
Advice
Play the disc to lock.
015DVX-S120-en03.8.5, 1:49 PM 82
 
						

							83
Operating Other Equipment with the CinemaStation Remote Control
Operating Other Equipment
 with the CinemaStation Remote Control
Storing Manufacturer Codes in the Remote
Control
If you set the manufacturer code (a unique code assigned to each
manufacturer) in the CinemaStation Remote Control, you can operate a
connected television, VCR, CD or MD recorder with the Remote Control.
• Depending on the model, the Remote Control may not work, or only work with a limited
number of functions. In this case, use the remote control that came with the television, VCR,
CD or MD recorder.
Setting the Manufacturer Code
When a manufacturer code is set for the TV button or VCR
button, you can begin using the features described in
“Available Operations” on page 84.
TV
CH
CINEMA
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CHTV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S120 WB56650
ON SCREEN MENU
TESTRETURN
STATUS
TV VOLVOLUMEMUTE
AMP
DVD/CD
VCRVIDEO
TUNER
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
TV
SHIFT
VCR
Note
Note
Note
Make sure that you set the correct manufacturer
code.
With a manufacturer code set for the TV button, press the
button to turn the TV power on/off (standby), and check
that the setting is working correctly.
With a manufacturer code set for the VCR button, press
the button then the features described in “Available
Operations” on page 84, and check that the setting is
working correctly.
• The TV button has 299 and the VCR button has 399 as the factory
default setting for manufacturer code.
Advice
While holding down SHIFT, enter the
manufacturer code (3 digits) of the device with
the Number buttons.
For details, refer to “Manufacturer Code List” on
pages 86 and 87.
When the setting succeeds, “Code Set OK” appears;
however, when it does not, “Code Set NG” appears in the
CinemaStation Display. If setting is unsuccessful,
perform steps 1 and 2 again.
When finished entering the code, release your finger from
SHIFT.
• Perform steps 1 to 2 while holding down SHIFT.
While holding down SHIFT, press TV or VCR.
Each button can be assigned one manufacturer code.
• For the TV button you can only set a television manufacturer code and
for the VCR button you can only set a VCR, CD or MD recorder
manufacturer code. Number
buttons
English
016DVX-S120-en03.8.5, 1:50 PM 83
 
						

							84
Operating Other Equipment with the CinemaStation Remote Control
Available Operations
While you set the manufacturer code for the TV or VCR button, you can use
the following functions after you press the TV or VCR button.
TV
CH
CINEMA
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CHTV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S120 WB56650
ON SCREEN MENU
TESTRETURN
STATUS
TV VOLVOLUMEMUTE
AMP
DVD/CD
VCRVIDEO
TUNER
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
When the Remote Control’s TV  or VCR
button does not work even after setting the
device manufacturer code
Try again from step 1 and keep the following points in
mind.
• Make sure you select the Remote Control’s TV or VCR
button correctly when setting the manufacturer code.
• If there are multiple manufacturer codes enter them in
order.
• After reinserting batteries, try the steps again (within 2
minutes of reinserting).
(When reinserting batteries be careful not to press the
Remote Control buttons. If a manufacturer code has been
set for the TV or VCR button, it may get deleted.)
To return to the factory default settings
While pressing SHIFT down as in step 2 Setting the
Manufacturer Code, enter 299 for TV or 399 for VCR.
(Step 3 is not necessary.)
Maintaining manufacturer code settings
Replace batteries before they become unusable. When the
batteries wear out and you remove them, the custom
manufacturer code setting will stay in memory for about 2
minutes. Be careful because if more than 2 minutes elapse
the codes may be deleted. Also, at this time, be careful not
to accidentally press a Remote Control button. This can
delete the codes.
*1TV POWER
*
1TV Input Switch
Stop
Fast Forward
Pause
Playback
Video Channel Selection (+)
Press VCR before starting operations. *1TV Channel Selection (+)
*
1TV Channel Selection (-)
Rewind
Video Channel Selection (-)
*
1TV Volume (+)
*
1TV Volume (-)
VCR operation
*1While you set the TV manufacturer code for the TV button, you can operate your television.
016DVX-S120-en03.8.5, 1:50 PM 84
 
						

							85
Operating Other Equipment with the CinemaStation Remote Control
Operating Other Equipment
 with the CinemaStation Remote Control
TV
CH
CINEMA
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CHTV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S120 WB56650
ON SCREEN MENU
TESTRETURN
STATUS
TV VOLVOLUMEMUTE
AMP
DVD/CD
VCRVIDEO
TUNER
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
TV
CH
CINEMA
CH
POWERPOWER
AUDIO
/DTSSELECT
NIGHTSW
TV CHTV INPUTSLEEPPRESET PRESET
A  B  C  D  E
CENTERSURR
SHIFT
STEREO MATRIX 6.1A-BREPEAT
ANGLESUBTITLE
DVR-S120 WB56650
ON SCREEN MENU
TESTRETURN
STATUS
TV VOLVOLUMEMUTE
AMP
DVD/CD
VCRVIDEO
TUNER
MOVIE MUSIC SPORTS GAME
SET MENU
ENTER
TV operation
CD or MD recorder operation
Press POWER before starting operations.
Channel Selection (+)
Channel Selection (-)
*
2VCR RewindInput Switch
Volume (+)
Volume (-)*
2VCR Stop
*
2VCR Fast Forward
*
2VCR Pause
*
2VCR Playback
Track Selection/Elapsed Time Input
Stop Pause
Playback Reverse Search
Reverse SkipForward Search
Forward Skip
Press VCR before starting operations. *
2While you set the VCR manufacturer code for the VCR button, you can operate your VCR.
English
016DVX-S120-en03.8.5, 1:50 PM 85
 
						

							86
Operating Other Equipment with the CinemaStation Remote Control
Manufacturer Code List
Depending on the model and year, you may not be able to use some manufacturer products. In this case, use
the remote control supplied with each product.
Manufacturer Manufacturer Code
Yamaha 299/292
Admiral 292/293
Aiko 287
Aiwa 294/276/283
Akai 295/296
Alba 296
AOC 297/286
Audiovox 285
Belcor 297
Bell & Howell 292
Bestar 298
Blaupunkt 229/222
Blue sky 298
Bradford 285
Brandt 223
Brocsonic 297
Brokwood 297
Bush 296
Candle 286/297
Citizen 286/287/297
Clatronic 298
Contec 285
Craig 224/285
Croslex 225
Crown 285
Curtis Mathis 297/226/286
CXC 285
Daewoo 297/298/224/227/228/
287
Daytron 239/297
Dual 298
Dumont 297
Emerson 297/224/239/232/285
Envision 286/297
Ferguson 223/265/266
First line 298
Fisher 295/233
Fraba 298
Manufacturer Manufacturer Code
Funai 277/278/285
Futuretec 285
GE 293/297/234/235/236
Gibralter 297
LG/Goldstar 297/298/239/237
Goodmans 296/298/223
Grundig 229/238/249
Harvard 285
Hitachi 297/239/242/243
ICE 296
Irradio 296
Itt/Nokia 244/245
JC Penny 293/297/234/237/286
JVC (Victor) 296/246/247
Kendo 298
Kenwood 297
KTV 297/239/285
Loewe 298/248
LXI 293/297/225/226/233
Magnavox 297/225/239/286
Marantz 286/297
Matsui 295
MGA 286/297
Mitsubishi 299/297/259
MTC 286/297
Multitec 285
NEC 297/252/282/286
Nikko 286/287/297
Nokia 244/245
Nokia Oceanic 245
Nordmende 265/266
NTC 287
Onwa 296/285
Panasonic 234/235/236/253
Philco 297/225/239/286
Philips 225
Pilot 297
Pioneer 226/235/254/255/268
Manufacturer Manufacturer Code
Portland 297/256/287
Quasar 234/235
Radio Shack 299/293/297/285/286
RCA 293/297/234/256/257/
258
Realistic 299/293/297/285/286
SABA 223/269/265/266
Sampo 286/297
Samsung 297/239/248/262/275/
286
Sanyo 295/233/279/272/273/
274
Schneider 296
Scott 297/285
Sharp 292/239/232/284
Shogun 297
Siemens 229
Signature 292
Sony 263
Soundesign 285
SSS 285/297
Starlite 285
Sylvania 297/225/286
Teknika 297/285/287
Telefunken 269/264/265/266
Thomson 223/266
Toshiba 292/226/267
Videch 297/242
Wards 297/239/232/286
TV
016DVX-S120-en03.8.5, 1:50 PM 86