Yamaha Dvx S120 Owners Manual
Have a look at the manual Yamaha Dvx S120 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 255 Yamaha manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
37 Playing Video and Music Discs Playing Video and Music Discs English You can play MP3 music that was recorded onto a CD-R or CD-RW by a computer. • Depending on recording conditions some discs cannot be played. Disc Structure Since the MP3 format can store several albums on a disc, a folder is assigned to an “Album”, and a file is assigned to a “Track”. Repeat Play You can use Track Repeat and Album Repeat to repeat the music. See page 34, “Repeating a Disc or Track (Repeat Play)”. Playback status on the TV screen You can check the playback status (disc type, now playing/ stopped) along with the total and elapsed playing of the current track on the TV screen. • CinemaStation is compatible with a bit rate range of 32, 64, 96, 128, 192 or 256 kbps. CinemaStation is also compatible with variable bit rate encoded MP3 files. • CinemaStation is compatible with a sampling frequency of 32, 44.1 or 48 kHz. • In some cases, you may not be able to play tracks in the order they were recorded. Advice Advice Note Root : Album (Folder) : Track (File) MP3 Playback Features 009DVX-S120-en03.8.5, 1:44 PM 37
38 Listening to the Radio Connecting the Antennas CinemaStation includes an AM Loop Antenna and indoor FM Antenna. Use the supplied antennas in areas with good radio wave reception. Connect each antenna into its jack properly. DIGITAL AUDIO VIDEO S VIDEO IN VCR OUT AM ANT O Y P B PRFM ANT GND MONITOR OUT MONITOR OUT (DVD ONLY) MONITOR OUT(DVD ONLY) VCR IN VIDEO INCOMPONENT VIDEO75 UNBALOUT OPTICAL • The AM Loop Antenna can be detached from its stand and attached to a wall. • To improve reception, we recommend that you install an outdoor antenna. For details, contact your local Yamaha sound products service center. • Install the supplied indoor FM Antenna and AM Loop Antenna away from this system. • Even if you connect an outdoor AM antenna, be sure to still use the AM Loop Antenna. Attach the Antenna to its stand. Open the AM ANT and GND jack levers to the right. Insert the AM Loop Antenna’s cord cores into the AM ANT and GND jacks.Close the lever to fasten the cord. Pull the cord lightly to make sure it is properly fastened. Adjust the Antenna left and right and find the best position for reception. Cord Core Lever Connecting the FM Antenna Connect the supplied indoor FM Antenna to the FM ANT jack. When connecting an outdoor FM antenna Use the antenna’s coaxial cable and a commercially available F-type connector to connect the antenna to the FM ANT jack. For details, ask the shop where you bought the outdoor antenna. Earth (GND jack) The GND jack does not provide secure grounding. However when there is a lot of noise, connecting it may improve reception. To ground CinemaStation, connect one end of a vinyl coated wire to the GND jack and the other end to a commercially available grounding rod or copper sheet, and bury the rod or sheet in damp earth. Connecting the AM Loop Antenna Advice Note Indoor FM Antenna (supplied)AM Loop Antenna (supplied) White BlackAM ANT jack GND jack 010DVX-S120-en03.8.5, 1:45 PM 38
39 Listening to the Radio Listening to the Radio English Listening to the Radio CinemaStation provides several methods for tuning radio stations to help you find channels as easy as you can. INPUT Press PRESET/BAND to select either FM or AM. Each time you press, the mode changes in the order as follows: FM (Tuning mode) → AM (Tuning mode) → (Preset mode) → FM (Tuning mode) → ...PRESET/BAND AUTO/MAN’L d PRESET/TUNING PRESET/TUNING u Selecting the Radio Tuner Press INPUT repeatedly on CinemaStation until TUNER appears. The input source changes to Tuner (Radio) and you can listen to AM/FM broadcasts. • You can also press TUNER on the Remote Control to change the input source to Tuner. Advice Display Selecting Radio Stations You have two ways to select radio stations, Auto Tuning and Manual Tuning. Auto Tuning is quick and handy to use when radio signal reception is strong. Select stations automatically (Auto Tuning) • If the colon (:) beside the Band indicator goes out, that means CinemaStation is in Tuning mode. Make sure the colon (:) is not lit up. Advice Press AUTO/MAN’L to set CinemaStation to Auto Tuning mode. When CinemaStation is set to Auto Tuning mode, the AUTO indicator lights up in the CinemaStation Display. Press PRESET/TUNING u/d to select the radio station you want to receive. Press u to search for high-frequency stations or press d to search for low-frequency stations. Display Preset number Band Group Colon* Frequency * Goes out in Tuning mode, lights up in Preset mode. 010DVX-S120-en03.8.5, 1:45 PM 39
40 Listening to the Radio PRESET/BAND AUTO/MAN’L d PRESET/TUNING PRESET/TUNING uFor stations with weak radio signals, tune manually. • If the radio waves are weak and Auto Tuning doesn’t work, tune manually (Manual Tuning). • When Auto Tuning finds a radio station, the TUNED indicator lights up and the frequency appears. • Manually tuning in to an FM station will automatically change the reception mode to monaural to increase the signal quality. Select your favorite stations by hand (Manual Tuning) Perform step 1 in “Select stations automatically (Auto Tuning)” on page 39. Press AUTO/MAN’L to set CinemaStation to Manual Tuning mode. When CinemaStation is set to Manual Tuning mode, the AUTO indicator goes out from the CinemaStation Display. Press PRESET/TUNING u/d to select the radio station you want to receive. Hold down the button to continue the tuning search. Advice Display 010DVX-S120-en03.8.5, 1:45 PM 40
41 Listening to the Radio Listening to the Radio English Up to 40 stations (5 Groups ✕ 8 Stations) can be automatically preset.PRESET/BAND A/B/C/D/E MEMORY AUTO/MAN’L PRESET/TUNING u d PRESET/TUNING Setting Channels in Advance (Preset) Presetting radio stations in memory helps you tune the preset radio stations using a few simple button operations. Automatically preset FM stations in advance (Auto Preset) Press PRESET/BAND to select FM. Press AUTO/MAN’L to make the AUTO indicator light up. Keep pressing MEMORY down for about 3 seconds. The Preset Number, MEMORY and AUTO indicators blink. After a few seconds, Auto Preset starts at the frequency currently displayed toward the higher frequency. When Auto Preset finishes the frequency of the last radio station memorized appears. Customizing Auto Preset method You can specify the Preset Group or number to start tuning. You can also start Auto Tuning at the frequency currently displayed toward either the lower or higher frequency. Perform steps 1 and 2 above, in “Automatically preset FM stations in advance (Auto Preset)”. Press MEMORY for about 3 seconds, then press A/B/C/D/E and PRESET/TUNING u/d to select the Preset Number you want to memorize first. Auto Preset will stop when the number memorized reaches 40 radio stations. Press PRESET/BAND to turn off the colon (:), then press PRESET/TUNING u/d. When pressing d, Auto Preset starts at the frequency currently displayed toward the lower frequency, and when pressing u, Auto Preset starts at the frequency currently displayed toward the higher frequency. Display 010DVX-S120-en03.8.5, 1:45 PM 41
42 Listening to the Radio You can manually preset up to 40 radio stations.A/B/C/D/E MEMORY PRESET/TUNING u d PRESET/TUNING • When presetting a radio station, you can set the frequency and reception mode (stereo/monaural) at the same time. • You can change the order of preset FM radio stations later. See page 43, “Changing the Order of Preset Stations”. • If the number of radio stations that have been preset is less than 40, Auto Preset automatically stops after searching the whole frequency range. • If a new radio station is preset for a Preset Number, the previously preset station for the Preset Number is deleted. • In Auto Preset, only FM radio stations with a strong signal are set. To preset radio stations with a weak signal set reception mode to monaural and preset manually. Manually preset stations in advance (Manual Preset) Select radio stations you want to preset. See page 39, “Selecting Radio Stations”. The frequency and broadcast band (FM or AM) of the tuned-in station appear in the CinemaStation Display. Press MEMORY. The MEMORY indicator blinks for about 5 seconds in the CinemaStation Display, which means CinemaStation is ready to preset. While the MEMORY indicator is blinking, press A/B/C/D/E to select the Preset Group (A to E). The Group appears. Check that the colon (:) beside the band indicator lights up. While the MEMORY indicator is blinking, press PRESET/TUNING u/d to select a Preset Number (1 to 8). Press u for a larger number and d for a smaller number. While the MEMORY indicator is blinking, press MEMORY. The selected Preset Group and Number, broadcast band (FM or AM) and frequency appear in the CinemaStation Display. Repeat steps 1 to 5 to manually preset other radio stations. Advice Note Display 010DVX-S120-en03.8.5, 1:45 PM 42
43 Listening to the Radio Listening to the Radio English You can tune in a radio station simply by selecting its Preset Number. TV CH CH POWERPOWER AUDIO /DTSSELECT NIGHTSW TV CHTV INPUTSLEEPPRESET PRESET A B C D E CENTERSURR SHIFT STEREO MATRIX 6.1A-BREPEAT ANGLESUBTITLE DVR-S120 WB56650 ON SCREEN MENU TESTRETURN STATUS TV VOLVOLUMEMUTE SET MENU ENTER A/B/C/D/E u PRESET PRESET d PRESET/TUNING u PRESET/BAND d PRESET/TUNING Selecting a Preset Station (Preset Tuning) Changing the Order of Preset Stations Press A/B/C/D/E repeatedly to select the station’s Preset Group. The Preset Group that appears in the CinemaStation Display changes each time you press A/B/C/D/E. Press PRESET u/d to select the Preset Number. The Preset Group and Number, broadcast band (FM or AM) and frequency appear in the CinemaStation Display with the TUNED indicator lit up. • You can also perform Preset Tuning by repeatedly pressing A/B/C/D/E and PRESET/TUNING u/d on CinemaStation. Advice You can also change the order of preset stations. Below is an example of the steps for switching the E1 and A5 radio stations. Tune in the radio station preset to E1. Review the procedure above, “Selecting a Preset Station (Preset Tuning)”. Press PRESET/BAND for about 3 seconds. E1 and the MEMORY indicator will blink in the CinemaStation Display. Tune in the radio station preset to A5 using A/B/ C/D/E and PRESET/TUNING u/d. A5 and the MEMORY indicator will blink in the CinemaStation Display. Press PRESET/BAND. “EDIT E1-A5” will appear in the CinemaStation Display and the preset stations will exchange places. 010DVX-S120-en03.8.5, 1:45 PM 43
44 Listening to the Radio TV CH CH POWERPOWER AUDIO /DTSSELECT NIGHTSW TV CHTV INPUTSLEEPPRESET PRESET A B C D E MODE STARTPTY SEEK FREQ/RDSCENTER SURR SHIFT STEREO MATRIX 6.1A-BREPEAT ANGLESUBTITLE DVR-S120RDS WB56660 ON SCREEN MENU TESTRETURN STATUS TV VOLVOLUME SET MENU ENTER u PRESET PTY SEEK START PRESET d FREQ/RDS PTY SEEK MODE Receiving RDS Stations (U.K. and Europe models only) RDS (Radio Data System) is a transmission system for FM stations used in many countries. RDS transmissions contain various types of information, including PS (Program Service), PTY (Program Type), RT (Radio Text), and CT (Clock Time). RDS works through cooperation among broadcasting stations. FREQ/RDS Press this button when receiving an RDS station to switch between frequency and RDS mode. The RDS mode display may include PS, PTY, RT and CT, depending on the information a radio station provides. PTY SEEK MODE Press this button to set the program type to search for. PTY SEEK START Once the program type has been selected in PTY SEEK mode, press this button to begin the search. PTY (Program Type) RDS Modes RDS supports four types of information: PS, PTY, RT and CT. PS (Program Service) Shows the name of the RDS station broadcasting. PTY (Program Type) Divides RDS broadcasts into the 15 genres shown at right. RT (Radio Text) Shows RDS broadcast information (including song title, artist name) using up to 64 letters and numbers plus the umlaut letter. If the radio text contains other characters, they will appear with an underbar. CT (Clock Time) Shows the current time updated once a minute. If data flow is interrupted, CT WAIT will appear.NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M M.O.R. M LIGHT M CLASSICS OTHER MNews Current Affairs General Information Sports Education Drama Culture Science Light Entertainment Pops Rock Middle-Of-the-Road Music (easy-listening) Light Classics Serious Classics Other Music U.K. and Europe models 011DVX-S120-en03.8.5, 1:46 PM 44
45 Listening to the Radio Listening to the Radio English Change RDS Mode There are four RDS display modes. When an RDS station is broadcasting, PS, PTY, RT or CT mode indicators corresponding to the services provided light up in the CinemaStation Display. Press FREQ/RDS repeatedly to change among the modes supported by the currently tuned RDS station.Note • When an RDS station is broadcasting, do not press FREQ/RDS until one or more mode indicators light up in the CinemaStation Display. If you press FREQ/RDS before the mode indicators light up, CinemaStation may not be able to change modes. • RDS information not provided by a station cannot be selected. • If the RDS station’s signal transmission is too weak, CinemaStation may not be able to use the service fully. In particular, radio text uses a lot of bandwidth, so it may not be available even when other modes are selectable. • RDS information may not transmit under poor conditions. In this case, press AUTO/MAN’L to set CinemaStation to Manual Tuning mode. This changes reception to monaural and may help RDS information reappear when you switch to RDS display mode. • If outside interference disrupts an RDS station broadcast, RDS information may suddenly disappear and “...WAIT ” appears in the CinemaStation Display. About PTY SEEK Press PTY SEEK MODE to set CinemaStation to PTY SEEK mode. The program type of the tuned in station or NEWS blinks in the CinemaStation Display. Press PTY SEEK START to start searching all preset RDS stations. The selected program type flashes and the PTY HOLD indicator lights up while the search is in progress. If the search finds a station that matches the program type you selected, CinemaStation will tune it in. If the station tuned in is not the one you want press PTY SEEK START again to continue the search for other stations broadcasting the program type you selected. Press PRESET u/d to select the program type you want. Your program type selection appears in the CinemaStation Display. When you select the program type, CinemaStation automatically searches through all preset stations currently broadcasting for that type. To cancel steps 1 or 2 Press PTY SEEK MODE twice. PS PTY RT CT RDS mode OFF 011DVX-S120-en03.8.5, 1:46 PM 45
46 Using Other Equipment Connecting Video Equipment Connect a VCR to CinemaStation to play or dub videos. You can also connect a game console or video camera. Connecting a Game Console or VCR •Always read the owner’s manual of any equipment you want to connect. DIGITAL AUDIO VIDEO S VIDEO IN VCR OUT AM ANTVCR OUT VCR IN VIDEO INY P B PRFM ANT GND MONITOR OUT MONITOR OUT (DVD ONLY) MONITOR OUT(DVD ONLY) VCR IN VIDEO INCOMPONENT VIDEOAUDIO RL 75 UNBALOUT OPTICAL VIDEO DIGITAL OPTICAL OUTPUT OUTPUT L RL R AUDIOVIDEO L RL R AUDIOVIDEO AUDIOVIDEO L RAUDIOVIDEO INPUT OUTPUT1 OUTPUT2 INPUT1 INPUT2 Please... TV Connection Cables VCR Game console or video camera OrCinemaStation Use a commercially available Audio/Video cable. Use the supplied Video Pin Cable. Audio/Video cable (commercially available) Video Pin Cable (supplied) When directly connecting the TV with the VCR, you can play video tape on the VCR even if you turn off CinemaStation. Use a commercially available optical cable Optical cable (commercially available) 011DVX-S120-en03.8.5, 1:46 PM 46