Yamaha Dpx 1 User Manual

E-15
English
MENU
MENU
Menu structure
It is necessary to make various settings on the menu so that this unit can achieve the best performance. The menu has a three-level hierarchy;
menu group, menu item, and submenu for some menu items. Listed below are the four menu groups.
1 To adjust the image quality. Available items depend on the type of input signal.
2 To make settings for the connected input signal. Available items depend on the type of input signal.
3 To make your own initial setting for several...

E-16
Menu structure
Input signal
Video/Component/RGB
Video/Component
Video/Component
Video
Video/Component
Video
Video/Component
RGB
RGB
RGB
RGB
RGB

2 ......... Adjustment cannot be made without any input signal.
Menu item
ASPECT SSets the aspect ratio of displaying the image on the screen. “AUTO” automatically switches
to the most appropriate mode. “NORMAL” (THROUGH) projects the image as the input
signal is sent. “SQUEEZE” desqueezes the squeezed image. “ZOOM” projects the image
scaled up with a...

E-17
English
MENU
Menu structure

4 
Menu item
INSTALLATION SThere are four methods to install this unit; tabletop or on-ceiling for front or rear projection. The image can
be inverted or rotated according to the setting for the installation method.
SCREEN ASPECT
Selects 4:3 or 16:9 depending on the screen to be used. If 16:9 is selected, vertical adjustment of the image
can be made by changing the value of the item “DIGITAL LENS SHIFT”. And automatically makes an
adjustment to project the 4:3 input...

E-18 
Menu screen and operating buttons
This section provides you with general information about the menu screen and operating buttons on the remote control and this unit’s control
panel for easier operation. Please read it carefully before starting to operate the menu.
Menu operation
MOVE MENU WINDOW
IMAGESIGNALINITIALSETUP
COLOR SYSTEMAUTO
COMPONENT
RGB PC
ENGLISH
2H.
INPUT A SIGNAL
INPUT B SIGNAL
LANGUAGE
POWER SAVING
LAMP RUNNING TIME
RESET
ESCAPE: EXIT MEMORY1 VIDEO
OFFONLANGUAGE
ESPAÑOL
FRANÇAIS...

E-19
English
MENU
Menu operation
AUTO
ESCAPE
SELECT
ASPECT
RESET STILL HIDE
INPUT MENU
PAT TPATTERNSTANDBY/ON
5
3, 5
41, 6
2, 4STANDBY/ONPATTERNMENUINPUTLAMP/COVERTEMP/FA N
24PESCAPESELECT
2, 4
5 3, 5 1, 6

Basic menu operation
To ensure proper projection, start with setting and adjustment for the menu group “SETUP”.
1.Press the MENU button to open the menu.
The previous menu screen opens if menu operation has already
been performed.
2.Press the + or – button to select a menu group.
MENU
MENU
Remote...

E-20
Menu operation
Some items are adjusted by increasing or decreasing the value on
the scale, and others by selecting a number or a word.
Press the RESET button to reset the parameter to the factory
setting. (Items without a factory setting cannot be reset.)
5.Press the h or g button to move the cursor to the
next item.
First return to the menu group by pressing the ESCAPE or h
button if the next item belongs to the another menu group.
Then follow the previous steps 2—4 to continue menu setting....

E-21
English
MENU
Menu operation

Basic submenu operation
[Operation groups A and B]
1.Select the menu item to be adjusted by following
steps 1—3 in “Basic menu operation”.
The submenu mark “
” appears on the right side of the item.
2.Press the SELECT or + button to open the submenu.
IMAGESIGNALINITIALSETUP
COLOR SYSTEMAUTO
COMPONENT
RGB PC
ENGLISH
2H.
INPUT A SIGNAL
INPUT B SIGNAL
LANGUAGE
POWER SAVING
LAMP RUNNING TIME
RESET
MEMORY1 VIDEO
OFFON
SELECT
SELECT
Remote controlor
Control panel...

E-22
IMAGESIGNALINITIALSETUP
COLOR SYSTEMAUTO
COMPONENT
RGB PC
ENGLISH
2H.
INPUT A SIGNAL
INPUT B SIGNAL
LANGUAGE
POWER SAVING
LAMP RUNNING TIME
RESET
MEMORY1 VIDEO
OFFON
IMAGESIGNALINITIALSETUP
PRESS ”SELECT” TO RESET 
LAMP RUNNING TIME ON 
”YES”.
ESCAPE: EXIT MEMORY1 VIDEO
LAMP RUNNING TIME 2H.NO
YES
Menu operation
Submenu operation—“WHITE BALANCE”
[Operation group C]
1.Select the menu item “WHITE BALANCE” in the menu
group “IMAGE” by following steps 1—3 in “Basic
menu operation”.
The submenu mark “
”...

E-23
English
MENU
3.Select the submenu item to be reset by pressing the
h or g button.
4.Press the SELECT or + button to open the confirma-
tion message screen.
5.Press the SELECT button to reset to the factory
setting.
The menu closes after the parameters have been reset to the
factory settings.
Menu operation
IMAGESIGNALINITIALSETUP
ESCAPE: EXIT MEMORY1 VIDEO
LAMP RUNNING TIME 2H.NO
YES PRESS ”SELECT” TO RESET 
LAMP RUNNING TIME ON 
”YES”.
3.Select “YES” by pressing the h or g button, and then
press...

E-24
Menu operation

One-touch image menu
1.
Press the SELECT button to open the one-touch
image menu when the menu has not been opened.
The image menu items appear at the bottom of the screen one
after another. The previous parameter appears once menu
operation has been performed.
The displayed item turns off if no operation is performed
within five seconds.
2.Select the item to be adjusted by pressing the h and
g button.
3.Select the value by pressing the + or – button.
Press the RESET button to reset...