Home
>
Yaesu Musen
>
Communications receiver
>
Yaesu Musen Yaesu Vr 5000 Communications Reciever Operating Manual
Yaesu Musen Yaesu Vr 5000 Communications Reciever Operating Manual
Have a look at the manual Yaesu Musen Yaesu Vr 5000 Communications Reciever Operating Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 54 Yaesu Musen manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 54
VR-5000 OPERATING MANUAL52
AUDIO WAV E METER
The VR-5000 can be set up to display the relative received audio wave-form on the LCD.
1. Press the [
F]
key momentarily, then press the [
4(
SPL)]
key.
2. Rotate the DIAL knob to set the cursor to the “AUDIO WAVE” menu option, then press
the [
ENT(
SET)]
key.
3. Display the current signal audio wave-form.
4. Press the [
(
)
/(
)]
keys to select the sam-
pling rate between 50 ms ~ 200 ms (in 10 ms
increments).
5. To cancel the Audio Wave Meter display,...](http://img.usermanuals.tech/thumb/5716/84713/w64_yaesu_vr-5000-comms-reciever_manual_d-53.png "Page 54
VR-5000 OPERATING MANUAL52
AUDIO WAV E METER
The VR-5000 can be set up to display the relative received audio wave-form on the LCD.
1. Press the [
F]
key momentarily, then press the [
4(
SPL)]
key.
2. Rotate the DIAL knob to set the cursor to the “AUDIO WAVE” menu option, then press
the [
ENT(
SET)]
key.
3. Display the current signal audio wave-form.
4. Press the [
(
)
/(
)]
keys to select the sam-
pling rate between 50 ms ~ 200 ms (in 10 ms
increments).
5. To cancel the Audio Wave Meter display,...")
![Page 55
VR-5000 OPERATING MANUAL53
The VR-5000 includes a convenient “Clone” feature, which allows the memory and con-
figuration data from one receiver to be transferred to another VR-5000. Here is the proce-
dure for Cloning one radio’s data to another:
1. Set both radio’s baud rate to the same rate, such as “”57,600 bps,” per the following
steps:
(1) Press the [
F]
key momentarily, then press the [
ENT(
SET)]
key.
(2) Rotate the DIAL knob to set the cursor to the “CAT RATE” menu option, then press
the [...](http://img.usermanuals.tech/thumb/5716/84713/w64_yaesu_vr-5000-comms-reciever_manual_d-54.png "Page 55
VR-5000 OPERATING MANUAL53
The VR-5000 includes a convenient “Clone” feature, which allows the memory and con-
figuration data from one receiver to be transferred to another VR-5000. Here is the proce-
dure for Cloning one radio’s data to another:
1. Set both radio’s baud rate to the same rate, such as “”57,600 bps,” per the following
steps:
(1) Press the [
F]
key momentarily, then press the [
ENT(
SET)]
key.
(2) Rotate the DIAL knob to set the cursor to the “CAT RATE” menu option, then press
the [...")
![Page 57
VR-5000 OPERATING MANUAL55
CAT Data Protocol
Serial data is passed via the CAT jack on the rear panel of the radio at 4800, 9600, or
57600 bits/sec. All commands sent from the computer to the receiver consist of five-byte\
blocks, with up to 200 ms between each byte. The last byte sent in each block is the instruc-
tion opcode, while the first four bytes of each block are arguments: either parameters for
that instruction, or dummy values (required to pad the block out to fiv\
e bytes):
Each byte sent...](http://img.usermanuals.tech/thumb/5716/84713/w64_yaesu_vr-5000-comms-reciever_manual_d-56.png "Page 57
VR-5000 OPERATING MANUAL55
CAT Data Protocol
Serial data is passed via the CAT jack on the rear panel of the radio at 4800, 9600, or
57600 bits/sec. All commands sent from the computer to the receiver consist of five-byte\
blocks, with up to 200 ms between each byte. The last byte sent in each block is the instruc-
tion opcode, while the first four bytes of each block are arguments: either parameters for
that instruction, or dummy values (required to pad the block out to fiv\
e bytes):
Each byte sent...")
![Page 58
VR-5000 OPERATING MANUAL56
MICROPROCESSOR RESETTING
1. Turn the Radio OFF.
2. Press and hold the [
CLR(
PRI CLR)] key while turing the Radio ON.
3. Press the [
ENT(
SET)] key to reset the all setting to their factory defaults (press the
[
CLR(
PRI CLR)] key to cancel the Reset procedure).
Reset](http://img.usermanuals.tech/thumb/5716/84713/w64_yaesu_vr-5000-comms-reciever_manual_d-57.png "Page 58
VR-5000 OPERATING MANUAL56
MICROPROCESSOR RESETTING
1. Turn the Radio OFF.
2. Press and hold the [
CLR(
PRI CLR)] key while turing the Radio ON.
3. Press the [
ENT(
SET)] key to reset the all setting to their factory defaults (press the
[
CLR(
PRI CLR)] key to cancel the Reset procedure).
Reset")
VR-5000 OPERATING MANUAL59 Frequency Range: 0.1 ~ 2599.99998 MHz (Cellular Blocked) Receiving Mode: CW/LSB/USB/AM/AM-N/WAM/FM-N/WFM Antenna Impedance: 50 Ω unbalanced, 450 Ω unbalanced Channel Step: Main Band LSB/USB/CW : 20 Hz/100 Hz/500 Hz/1 kHz/5 kHz AM-N/AM/WAM :1/5/9/10/20/25/50/100/500 kHz FM-N : 5/6.25/10/12.5/20/25/50/100/500 kHz WFM : 10/50/100/500 kHz Sub Band AM : 1/5/9/10/20/25/50/100/500 kHz FM-N : 5/6.25/10/12.5/20/25/50/100/500 kHz Memory Channel: Regular Memories: 2000 Channels PS “Preset” Memories: 5 Channel Operating Temp.: –10 °C ~ + 50 °C Sensitivity: 0.2 ~ 0.49998 MHz SSB/CW 4.8 µV (10 dB S/N) AM 10.8 µV (10 dB S/N) 0.5 ~ 1.79998 MHz SSB/CW 1.0 µV (10 dB S/N) AM 4.0 µV (10 dB S/N) 1.8 ~ 3.99998 MHz SSB/CW 0.6 µV (10 dB S/N) AM 2.5 µV (10 dB S/N) 4.0 ~ 29.99998 MHz SSB/CW 0.3 µV (10 dB S/N) AM 1.1 µV (10 dB S/N) 28.0 ~ 29.99998 MHz FM-N 0.35 µV (12 dB SINAD) 30.0 ~ 1999.99998 MHz SSB/CW 0.3 µV (10 dB S/N) AM 1.2 µV (10 dB S/N) FM-N 0.45 µV (12 dB SINAD) WFM 1.5 µV (12 dB SINAD) 2000.0 ~ 2599.99998 MHz SSB/CW 0.5 µV (10 dB S/N) AM 1.8 µV (10 dB S/N) FM-N 0.8 µV (12 dB SINAD) Conducted Sprious Emission: Less than –54 dBm Supply Voltage: DC 13.5V ±15 % Current Consumption: 0.7 A (@ audio output 1W) Audio Output: At least 1 W @ 8 Ω Audio Output Impedance:8 Ω Case Size: 180 x 70 x 203 mm (W x H x D) w/o knob Weight: Approx. 1.9 kg Specifications are subject to change without notice. Specifications
41 “This scanner receiver is not a digital scanner and it is incapable of being converted or modified to a digital scanner receiver by the user.” 1. Changes or modifications to this device not expressly approved by VERTEX STANDARD could void the user's authorization to operate this device. 2. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference including interference that may cause undesired operation. 3. The scanning receiver in this equipment is incapable of tuning, or readily being altered, by the User to operate within the frequency bands allocated to the Domestic public Cellular Telecommunications Service in Part 22. This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference, including interference that may cause undesirable operation of this device. This equipment has been tested and found to comply with the limits for a Class A Digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the User will be required to correct the interference at his own expense.
Printed in Japan 0303Y-EY Copyright 2003 VERTEX STANDARD CO., LTD. All rights reserved.No portion of this manual may be reproduced without the permission of VERTEX STANDARD CO., LTD. E13611002