Xerox Xm3 22w C Dvi Users Guide

10Xerox© LCD Monitor User’s Manual
Introduction

Make sure all of the following contents are included in the box.
If any items are missing, please return this product to the 
original place of purchase.
CAUTION:
Be sure to save original box and all packing material for future 
transport of monitor.
ACPower Cord
Package Contents
LCD Monitor 
Quick GuideWarranty CardCD-ROM(Driver/Manual)

D-SUB Cable
DVI Cable (Optional) AUDIO Cable
warranty card����22������������
Quick������
 

11Xerox© LCD Monitor User’s Manual
Introduction
ENGLISH
Front View and Controls

 ▼▲  
  In OSD (On-Screen Display) mode, press the ▲/▼ buttons
      to select the desired menu. Adjusts the speaker volume up
           and down.
  MENU
  Press once to display the OSD (On-Screen Display).  And 
press again to activate the desired setting.
   LED 
   The LED light indicates when the LCD monitor is activated 
(blue light indicates power on and amber light indicates 
power saving).
  
   Turns the LCD...

Installation
12Xerox© LCD Monitor User’s Manual

1 Turn off the computer and unplug the power cable.
2 Connect the signal cable to the D-SUB port on the back of 
the computer.

3 Connect the audio cable to the out port on the back of the 
computer.
Refer to the owner’s manual of the computer for connections.
In the process of connecting external equipment, do not connect 
any AC power cords to wall outlets until all other connections 
are completed.
2  Installation
Connecting Your LCD Monitor to a...

Installation
ENGLISH
13Xerox© LCD Monitor User’s Manual

4 Connect the power cord to the LCD monitor and wall outlet. 
 
5 Press the     button, located on the bottom side of the main 
unit to turn the monitor on, then turn the computer on. If the 
monitor displays an image, the monitor is successfully 
installed. If no image is displayed, check all connections.
NOTE:
Unplug the monitor before installation to avoid electric shock or 
damage.
NOTE:
The     button is used for switching the LCD monitor on...

Installation
14Xerox© LCD Monitor User’s Manual

Method 2: Digital (DVI) Connection 
1 Turn off the computer and unplug the power cable.

2 Connect the DVI signal cable to the DVI port on the back of 
the computer.
3 Connect the audio cable to the out port on the back of the 
computer.
4 Connect the power cord to the LCD monitor and wall outlet. 
  
5 Press the     button, located on the bottom side of the main 
unit to turn the monitor on, then turn the computer on. If the 
monitor displays an image,...

Installation
ENGLISH
15Xerox© LCD Monitor User’s Manual

NOTE:
Please note, some video cards and PCs with integrated video 
will not probably support the wide-screen resolutions; and you 
have to update the video chip/card driver or even purchase a 
new better video card to acquire the advantages of the wide-
screen.
HDCP has been implemented across the DVI interface. The HDCP 
specification provides  a cost-effective and transparent method
for receiving the highest quality digital entertainment...

Installation
16Xerox© LCD Monitor User’s Manual
Installing Your LCD Monitor
Follow the instructions below to set up and install the monitor.
1 The package contains:
  Display unit
  Stand

2 Cover an even, stable surface with a soft cloth. Place the unit 
face-down on the cloth. Fit the stand onto the bottom of the 
display unit as shown, then push until the two latches snap 
into their sockets.
LATCHES
LATCH SOCKETS
 

ENGLISH
17Xerox© LCD Monitor User’s Manual

To create the best picture, your XM3 series has been preset at 
the factory with the Preset Mode Timing shown on page 24.
The OSD (On-Screen Display) Menu allows the user to adjust
various settings and options by following the steps below.
1  Press the MENU button to display the OSD. The OSD main 
menu provides an overview of the selection of controls 
available.
2  Press the ▲ or ▼ button to highlight the desired icon.  Then, 
press the MENU button to...

18Xerox© LCD Monitor User’s Manual

The main menu includes the following options:

    picture  
 Adjusts picture settings such as brightness and contrast.
     advanced 
 Allows selection of the general color tint: CUSTOM COLOR, 
WARM, or COOL.
     audio
 Allows selection of the sound options and effects.
     options 
 Adjusts picture settings such as Horizontal/Vertical position, 
H size and phase.
     utilities 
 Adjusts the setting of the display time of the on-screen menu.
  Allows selection of...

ENGLISH
19Xerox© LCD Monitor User’s Manual

1 The picture menu provides access to the following menus:
The picture Menu

2  The picture menu includes the following options:ON  DESCRIPTION
    auto adjust  Automatically adjust the display settings to optimize monitorsperformance.
     brightness  Controls the overall brightness.
     contrast  Controls the difference between the brightest and darkest regions of the picture.
    h. position   Adjusts  the position of the picture left and right in the...