Xerox Xm3 22w C Dvi Users Guide

							
10Xerox© LCD Monitor User’s Manual
Introduction

Make sure all of the following contents are included in the box.
If any items are missing, please return this product to the 
original place of purchase.
CAUTION:
Be sure to save original box and all packing material for future 
transport of monitor.
ACPower Cord
Package Contents
LCD Monitor 
Quick GuideWarranty CardCD-ROM(Driver/Manual)

D-SUB Cable
DVI Cable (Optional) AUDIO Cable
warranty card����22������������
Quick������
 
						

							
11Xerox© LCD Monitor User’s Manual
Introduction
ENGLISH
Front View and Controls

 ▼▲  
  In OSD (On-Screen Display) mode, press the ▲/▼ buttons
      to select the desired menu. Adjusts the speaker volume up
           and down.
  MENU
  Press once to display the OSD (On-Screen Display).  And 
press again to activate the desired setting.
   LED 
   The LED light indicates when the LCD monitor is activated 
(blue light indicates power on and amber light indicates 
power saving).
  
   Turns the LCD monitor on and off.
 AUTO
  Press to automatically adjust the display settings to optimize 
monitors performance.
1
2
3
4
5
1
2
3
4
5
 
						

							
Installation
12Xerox© LCD Monitor User’s Manual

1 Turn off the computer and unplug the power cable.
2 Connect the signal cable to the D-SUB port on the back of 
the computer.

3 Connect the audio cable to the out port on the back of the 
computer.
Refer to the owner’s manual of the computer for connections.
In the process of connecting external equipment, do not connect 
any AC power cords to wall outlets until all other connections 
are completed.
2  Installation
Connecting Your LCD Monitor to a Computer 
Method 1 : Analog (D-SUB) Connection
Connect to power source
Connect to the D-SUB port 2
4
Connect to the out port3
2 D-SUB 
2 D-SUB+1 DVI 
 
						

							
Installation
ENGLISH
13Xerox© LCD Monitor User’s Manual

4 Connect the power cord to the LCD monitor and wall outlet. 
 
5 Press the     button, located on the bottom side of the main 
unit to turn the monitor on, then turn the computer on. If the 
monitor displays an image, the monitor is successfully 
installed. If no image is displayed, check all connections.
NOTE:
Unplug the monitor before installation to avoid electric shock or 
damage.
NOTE:
The     button is used for switching the LCD monitor on and 
off, it does not disconnect the device from the main voltage. 
To completely disconnect the main voltage, please remove the 
power plug from the socket. 
NOTE:
The LED indicator is blue when the monitor operates normally 
and will turn to amber when in power saving mode.  When the 
monitor is off, the LED turns dark.
 
						

							
Installation
14Xerox© LCD Monitor User’s Manual

Method 2: Digital (DVI) Connection 
1 Turn off the computer and unplug the power cable.

2 Connect the DVI signal cable to the DVI port on the back of 
the computer.
3 Connect the audio cable to the out port on the back of the 
computer.
4 Connect the power cord to the LCD monitor and wall outlet. 
  
5 Press the     button, located on the bottom side of the main 
unit to turn the monitor on, then turn the computer on. If the 
monitor displays an image, the monitor is successfully 
installed. If no image is displayed, check all connections.
6 When the DVI and VGA input ports are connected at the 
same time, press down the AUTO button for 3 seconds to 
switch between the VGA mode and DVI mode.
Connect to power source4
2Connect to the DVI port 
Connect to the out 
port3
2 D-SUB
2 D-SUB+1 DVI 
 
						

							
Installation
ENGLISH
15Xerox© LCD Monitor User’s Manual

NOTE:
Please note, some video cards and PCs with integrated video 
will not probably support the wide-screen resolutions; and you 
have to update the video chip/card driver or even purchase a 
new better video card to acquire the advantages of the wide-
screen.
HDCP has been implemented across the DVI interface. The HDCP 
specification provides  a cost-effective and transparent method
for receiving the highest quality digital entertainment  content
from HDMI compliant video sources.  
(Specified for HDCP models)  
The wide-screen display enables you to view your content in a brand new way. The next 
generation of the computing environments and game consoles are starting to support 
wide-screen resolutions.
■  Multitask  -  view applications side by side and reduce toggling between them.
■  Enrich  -  view DVD films in their native wide format for an enhanced multimedia  experience.
■  Experience -  enjoy gaming action at full frame rates and higher wide-screen resolution.
However, to enable wide resolution ( XM3-22w is WSXGA+, 1680x1050), you need to
select the correct setting in your Control Panel>Display>Settings Dialog box in Windows  . 
Please note, some video cards and PCs with integrated video may not support the 
wide-screen resolutions. Y ou may have to update the video chip/card driver or even 
purchase a new video card to utilize the advantages of  the wide-screen.
For your PC, refer to the available drivers and downloads from the PC manufacturer's
web site. For upgraded video card, refer to the video card manufacturer's web site: 
nVIDIA® (www.nvidia.com), ATI® (www.ati.com), S3® (www.s3graphics.com), HOW TO GET SUPPORT FOR YOUR WIDE SCREEN
®
 Intel® (www .intel.com), and so on.
 
						

							
Installation
16Xerox© LCD Monitor User’s Manual
Installing Your LCD Monitor
Follow the instructions below to set up and install the monitor.
1 The package contains:
  Display unit
  Stand

2 Cover an even, stable surface with a soft cloth. Place the unit 
face-down on the cloth. Fit the stand onto the bottom of the 
display unit as shown, then push until the two latches snap 
into their sockets.
LATCHES
LATCH SOCKETS
 
						

							
ENGLISH
17Xerox© LCD Monitor User’s Manual

To create the best picture, your XM3 series has been preset at 
the factory with the Preset Mode Timing shown on page 24.
The OSD (On-Screen Display) Menu allows the user to adjust
various settings and options by following the steps below.
1  Press the MENU button to display the OSD. The OSD main 
menu provides an overview of the selection of controls 
available.
2  Press the ▲ or ▼ button to highlight the desired icon.  Then, 
press the MENU button to activate the highlighted icon.
3  Press the ▲ or ▼ button to select the desired adjustment 
icon. Then, press the MENU button.
4  Press the ▲ or ▼ button to change the value of the selected 
item.
5  Select the exit icon to exit the OSD.
6  Repeat steps 1 through 4 to make further adjustments. All 
changes are stored immediately. 
Using the OSD Menu
3  On-Screen Display (OSD) Menu
picture
advanced
audio
options
utilities
reset auto adjust 
to select
brightness
contrast
h position
v position
phase
clock
exit
exit
source
On-Screen Display (OSD) Menu
 
						

							
18Xerox© LCD Monitor User’s Manual

The main menu includes the following options:

    picture  
 Adjusts picture settings such as brightness and contrast.
     advanced 
 Allows selection of the general color tint: CUSTOM COLOR, 
WARM, or COOL.
     audio
 Allows selection of the sound options and effects.
     options 
 Adjusts picture settings such as Horizontal/Vertical position, 
H size and phase.
     utilities 
 Adjusts the setting of the display time of the on-screen menu.
  Allows selection of the language used on all the on-screen 
menus.
  reset
 Restores the factory settings.
  exit
 Exits the on-screen menus.
The OSD Options
picture
advanced
audio
options
utilities
reset auto adjust 
to select
brightness
contrast
h position
v position
phase
clock
exit
exit
source
On-Screen Display (OSD) Menu
 
						

							
ENGLISH
19Xerox© LCD Monitor User’s Manual

1 The picture menu provides access to the following menus:
The picture Menu

2  The picture menu includes the following options:ON  DESCRIPTION
    auto adjust  Automatically adjust the display settings to optimize monitorsperformance.
     brightness  Controls the overall brightness.
     contrast  Controls the difference between the brightest and darkest regions of the picture.
    h. position   Adjusts  the position of the picture left and right in the window.
     v. position  Adjusts the position of the picture up and down in the window.
  phase  Adjusts signal phase, which can improve focus clarity and image stability.
    clock  Adjusts the width of the picture.
    exit   Exits the picture menu.
picture
advanced
audio
options
utilities
reset auto adjust 
to select
brightness
contrast
h position
v position
phase
clock
exit
exit
source
On-Screen Display (OSD) Menu