Xerox WorkCentre 5755 Manual
Here you can view all the pages of manual Xerox WorkCentre 5755 Manual. The Xerox manuals for All in One Printer are available online for free. You can easily download all the documents as PDF.
Page 111
![Page 111
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide111
6. Click on the [Apply] button to accept changes or [Undo] to return the settings to their previous
value.
7. Click on the [OK] button when you see the message “Properties have been successfully
modified”.](http://img.usermanuals.tech/thumb/82/58058/w300_d_1487672397-xerox_5755_d-110.png "Page 111
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide111
6. Click on the [Apply] button to accept changes or [Undo] to return the settings to their previous
value.
7. Click on the [OK] button when you see the message “Properties have been successfully
modified”.")
Network Configuration WorkCentre™ 5735/5740/5745/5755/5765/5775/5790 System Administrator Guide111 6. Click on the [Apply] button to accept changes or [Undo] to return the settings to their previous value. 7. Click on the [OK] button when you see the message “Properties have been successfully modified”.
Page 112
Network Configuration WorkCentre™ 5735/5740/5745/5755/5765/5775/5790 System Administrator Guide 112 Raw TCP/IP Printing Note:TCP/IP must be enabled before Raw TCP/IP Printing is enabled. Raw TCP/IP is a printing method used to open a TCP socket-level connection, over Port 9100, to stream a print-ready file to the printer's input buffer, and then to close the connection after sensing an End Of Job indicator in the Page Description Language, or after expiration of a preset timeout value. Port 9100...
Page 113
![Page 113
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide113
9. In the Job Boundary Determination area:
a. For End of Job Timeout, enter the required time between 0 and 1800, for the device to wait
for the data received through the port before terminating the job.
b. For Control D Marks End of PostScript Job, check the [Enabled] checkbox, when enabled,
the “Ctrl-d” character indicates the end of a PostScript print job.
10. In the Backchannel Data area:
a. For...](http://img.usermanuals.tech/thumb/82/58058/w300_d_1487672397-xerox_5755_d-112.png "Page 113
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide113
9. In the Job Boundary Determination area:
a. For End of Job Timeout, enter the required time between 0 and 1800, for the device to wait
for the data received through the port before terminating the job.
b. For Control D Marks End of PostScript Job, check the [Enabled] checkbox, when enabled,
the “Ctrl-d” character indicates the end of a PostScript print job.
10. In the Backchannel Data area:
a. For...")
Network Configuration WorkCentre™ 5735/5740/5745/5755/5765/5775/5790 System Administrator Guide113 9. In the Job Boundary Determination area: a. For End of Job Timeout, enter the required time between 0 and 1800, for the device to wait for the data received through the port before terminating the job. b. For Control D Marks End of PostScript Job, check the [Enabled] checkbox, when enabled, the “Ctrl-d” character indicates the end of a PostScript print job. 10. In the Backchannel Data area: a. For...
Page 114
![Page 114
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 114
2. Click on the [Protocols] link.
3. Select [SMTP Server] in the directory tree.
a. In the Required Information area, select one of the following:
•Use DNS (to identify SMTP Server) - Use this to allow the DNS to automatically find an
IP address of the mail server.
•Specify SMTP Server Manually - Select this option to map to a specific SMTP server.
a. If you select Specify SMTP Server Manually, select...](http://img.usermanuals.tech/thumb/82/58058/w300_d_1487672397-xerox_5755_d-113.png "Page 114
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 114
2. Click on the [Protocols] link.
3. Select [SMTP Server] in the directory tree.
a. In the Required Information area, select one of the following:
•Use DNS (to identify SMTP Server) - Use this to allow the DNS to automatically find an
IP address of the mail server.
•Specify SMTP Server Manually - Select this option to map to a specific SMTP server.
a. If you select Specify SMTP Server Manually, select...")
Network Configuration WorkCentre™ 5735/5740/5745/5755/5765/5775/5790 System Administrator Guide 114 2. Click on the [Protocols] link. 3. Select [SMTP Server] in the directory tree. a. In the Required Information area, select one of the following: •Use DNS (to identify SMTP Server) - Use this to allow the DNS to automatically find an IP address of the mail server. •Specify SMTP Server Manually - Select this option to map to a specific SMTP server. a. If you select Specify SMTP Server Manually, select...
Page 115
Network Configuration WorkCentre™ 5735/5740/5745/5755/5765/5775/5790 System Administrator Guide115 LDAP Note:LDAP support is only available on the device. Configuration of the LDAP directory settings requires the network to support LDAP services. LDAP (Lightweight Directory Access Protocol) is a popular protocol used by large accounts to access large quantities of data including corporate address books. The local system will need to know where the LDAP server is located on the network and may need a...
Page 116
![Page 116
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 116
d. Select the server type from the [LDAP Server] drop-down menu.
6. In the Optional Information area:
a. Enter the search directory location of the server where the LDAP information is stored in the
[Search Directory Root] field.
b. For Login Credentials to Access LDAP Server, select one of the following:
•None - If no login is required.
•Authenticated User - The device will use the login details entered...](http://img.usermanuals.tech/thumb/82/58058/w300_d_1487672397-xerox_5755_d-115.png "Page 116
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 116
d. Select the server type from the [LDAP Server] drop-down menu.
6. In the Optional Information area:
a. Enter the search directory location of the server where the LDAP information is stored in the
[Search Directory Root] field.
b. For Login Credentials to Access LDAP Server, select one of the following:
•None - If no login is required.
•Authenticated User - The device will use the login details entered...")
Network Configuration WorkCentre™ 5735/5740/5745/5755/5765/5775/5790 System Administrator Guide 116 d. Select the server type from the [LDAP Server] drop-down menu. 6. In the Optional Information area: a. Enter the search directory location of the server where the LDAP information is stored in the [Search Directory Root] field. b. For Login Credentials to Access LDAP Server, select one of the following: •None - If no login is required. •Authenticated User - The device will use the login details entered...
Page 117
![Page 117
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide117
2. Enter the default login information in the [Default Login Context] field, this is the first context
that will be searched.
Note:The word LDAP should appear in the login context, for example, cn=LDAP, o=xerox, c=us.
3. Click on the [Apply] button.
To D e f i n e U s e r M a p p i n g s
Fields contained within LDAP structures are not standardized. This section allows you to find out what
results you...](http://img.usermanuals.tech/thumb/82/58058/w300_d_1487672397-xerox_5755_d-116.png "Page 117
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide117
2. Enter the default login information in the [Default Login Context] field, this is the first context
that will be searched.
Note:The word LDAP should appear in the login context, for example, cn=LDAP, o=xerox, c=us.
3. Click on the [Apply] button.
To D e f i n e U s e r M a p p i n g s
Fields contained within LDAP structures are not standardized. This section allows you to find out what
results you...")
Network Configuration WorkCentre™ 5735/5740/5745/5755/5765/5775/5790 System Administrator Guide117 2. Enter the default login information in the [Default Login Context] field, this is the first context that will be searched. Note:The word LDAP should appear in the login context, for example, cn=LDAP, o=xerox, c=us. 3. Click on the [Apply] button. To D e f i n e U s e r M a p p i n g s Fields contained within LDAP structures are not standardized. This section allows you to find out what results you...
Page 118
Network Configuration WorkCentre™ 5735/5740/5745/5755/5765/5775/5790 System Administrator Guide 118 the device so that the members of that group will have administrator access to the device. When a user logs in at the device with their network authentication account, the device performs an LDAP look-up to determine if the user is a member of any groups, (LDAP server will find members nested down five levels of a group. For example, if LDAP searches for a user within the Admin Group, it may not find...
Page 119
![Page 119
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide119
c. To verify any of these groups, enter a name of one of the members of the LDAP server groups
in the [Enter User Name] field, then click on the [Test] button.
Under the Test Results column, it will display Access. If the test result displays No Access,
this will mean that the user name is not a member of the Access Group, or the Access Group
name was misspelled, or that the Access Group does not exist...](http://img.usermanuals.tech/thumb/82/58058/w300_d_1487672397-xerox_5755_d-118.png "Page 119
Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide119
c. To verify any of these groups, enter a name of one of the members of the LDAP server groups
in the [Enter User Name] field, then click on the [Test] button.
Under the Test Results column, it will display Access. If the test result displays No Access,
this will mean that the user name is not a member of the Access Group, or the Access Group
name was misspelled, or that the Access Group does not exist...")
Network Configuration WorkCentre™ 5735/5740/5745/5755/5765/5775/5790 System Administrator Guide119 c. To verify any of these groups, enter a name of one of the members of the LDAP server groups in the [Enter User Name] field, then click on the [Test] button. Under the Test Results column, it will display Access. If the test result displays No Access, this will mean that the user name is not a member of the Access Group, or the Access Group name was misspelled, or that the Access Group does not exist...
Page 120
Network Configuration WorkCentre™ 5735/5740/5745/5755/5765/5775/5790 System Administrator Guide 120 b. In the field provided, type in the LDAP search string (filter) that you wish to apply. The filter defines a series of conditions that the LDAP search must fulfill in order to return the information you seek. The form of the typed search string (filter) is LDAP objects placed inside parentheses. For example, to find all users that have an e-mail attribute (mail enabled), type (objectClass=user)...