Xerox WorkCentre 5755 Manual

IP Configuration in a Mac Environment
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide91
At the Mac
At your Workstation
1. Load the Print and Fax Drivers CD-ROM into your CD drive.
2. Open the CD and select the required language, if necessary.
3. Double-click to open the [Drivers] folder.
4. Double-click to open the [Mac] folder.
5. Double-click to open the folder containing the drivers for your Mac OS version.
6. Double-click to open the [machine model.dmg] file.
7. The Xerox...

Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 92
Network Configuration
This section explains how to set up the device to operate in a Windows TCP/IP environment. The 
following information is provided:
•Configure Static IP Address using the Device on page 92
•Configure Dynamic Addressing on page 94
•Configure IP Settings using Internet Services on page 96
•IPv4 on page 96
•IPv6 on page 97
•Configure SLP on page 100
•Configure FTP on page 101
•SNMP (Simple...

Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide93
• Static IP Address for the device.
• Subnet Mask Address for the device.
• Gateway Address for the device.
• Host Name for the device.
• Ethernet Cable.
• Print and Fax Drivers CD (delivered with your device).
Enter a Static IP Address
Note:To configure this feature or these settings access the Tools pathway as a System 
Administrator. For details, refer to Access Tools Pathway as a System Administrator on...

Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 94
DNS/DDNS Configuration
1. From the To o l s  pathway, touch [Network Settings].
2. Touch [Network Setup].
3. Touch [TCP IP].
4. Touch [TCP/IP Settings].
5. Touch [DNS Configuration], the DNS Configuration screen displays.
Note:This feature will be inaccessible (grayed out) if TCP/IP protocol is not enabled.
a. Touch the [Domain Name] button.
b. Touch the bar under Domain Name.
c. Touch the [Clear Text]...

Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide95
Installation via DHCP (Dynamic Host Configuration Protocol)
DHCP is enabled on the device by default. If the device is connected to the network, the TCP/IP 
information will be configured when the device is powered on and no further configuration is required. 
Print a Configuration Report to verify that TCP/IP information is correct.
1. Press the  button on the device. 
2. Touch the [Machine Information]...

Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 96
Configure IP Settings using Internet Services
Note:TCP/IP and HTTP should have been initially configured, refer to Enable TCP/IP and HTTP at 
the Device on page 19 of this guide.
IPv4
Note:To configure TCP/IP Settings access the Properties tab as a System Administrator. For 
details, refer to Access Internet Services as System Administrator on page 24.
1. From the Properties tab, click on the [Connectivity]...

Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide97
h. For Dynamic DNS Registration, check the [Enabled] checkbox to enable Dynamic DNS 
Registration (DDNS).
Note:If your DNS Server does not support dynamic updates there is no need to enable DDNS.
6. In the DHCP/DDNS area:
a. For Release Registration, check the [Enabled] checkbox, ONLY if you wish to release this 
device's IP Address upon reboot. Default is unchecked.
7. In the Zero-Configuration...

Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 98
6. In the Stateless Addresses area: 
a. The Link-Local Address is automatically populated. 
This is a network address which is intended only for use in a local data link layer network, and 
not routed beyond that network. Link-local addresses are often used for network address 
auto-configuration where no external source of network addressing information is available. 
The printer's IPv6 Link-local...

Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide99
9. The Default Gateway will display the link-local address of the router (known in IPv4 as the default 
gateway).
10. The device can be configured with up to 4 manual IPv6 addresses, in the Manual Address 
Options area:
a. Check the [Enable Manual Address] checkbox to enable Router Prefix attachment.
b. The Router Prefix is derived from router advertisements. Select a router address prefix from 
the list...

Network Configuration
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
System Administrator Guide 100
Configure SLP 
Configure Service Location Protocol (SLP) if needed to support CUPS, Mac OS, and NetWare.
SLP is used to announce and look up services on a local network. When SLP is enabled, the device 
becomes a Service Agent (SA) and announces its services on the network to User Agents (UA), who 
search for services, using SLP.
Note:To configure this feature or these settings access the Properties tab as...