Xerox WorkCentre 3045 Service Manual

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 1-19General Information
Specifications
Printing Specifications
CharacteristicSpecification
Printing TechnologyRecording System: LED electro-photographic system 
using OPC Drum and direct transfer to the media.
Exposure System: LED printhead
Transfer System: Finished image is transferred onto the 
media
Fusing System: Thermal fusing system by belt
Print Volume Average 250 PV/month
Maximum 20,000 PV/month
Median 300 PV/month
Color Medium...

1-20 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  General Information
Scanning Specifications
CharacteristicSpecifications
Scanning Mode
■Platen Mode: Scan document using the document glass
■Constant Velocity Transport (CVT) Mode: Scan 
document via the Automatic Document Feeder (ADF)
Maximum Scan Size
■Platen Mode: 215.9 mm x 297 mm (8.5 in. x 11.7 in.)
■ADF; 215.9 mm x 355.6 mm (8.5 in. x 14 in.)
Media Size
Minimum
■Fast Scan Direction: 148 mm (5.8 in.)
■Slow Scan Direction; 210...

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 1-21General Information
Copy Specifications
Scan Performance 
FunctionDocumentBlack & WhiteColor
USB Scan to 
Computer (TWAIN/
WIA)Document Glass, 300 dpi, 
24-bit color, letter size

1-22 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  General Information
Fax Specifications
Fax Specifications
CharacteristicSpecifications
Communication 
Mode
■Priority 1: ITU-T Super G3
■Priority 2: ITU-T G3 ECM
■Priority 3: ITU-T G3
Resolution
Lines:
PixelsB&W (Fast Scan x Slow Scan)
■8 pixels x 3.85 line / mm
■8 pixels x 7.7 line / mm
■8 pixels x 15.4 line / mm 
■16 pixels x 15.4 line /mm
■400 x 400 ppi / 25mm
■300 x 300 ppi / 25mm
■200 x 200 ppi / 25mm
■100 x 100 ppi / 25mm...

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 1-23General Information
Memory Specifications
Electrical Specifications
Auto Reduction/
Enlarge (Auto Fit)On/Off (same as printer driver)
Rotation On/Off (same as printer driver)
N-Up 1/ 2/ 4/ 8/ 16/ 32 (same as printer driver)
Watermark Supported (same as printer driver)
Phone Book Up to 500 Speed Dial numbers and up to 500 Group Dial.
Local phone book stored on PC not linked device.
CharacteristicSpecifications
Memory 3010/3040 64 MB on...

1-24 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  General Information
Environmental Specifications
Note
Image quality is guaranteed in the optimum ranges for temperature and 
humidity, which represent a general office environment.
Operating Mode
CharacteristicSpecification
Te m p e r a t u r e
Optimum 15 to 28° C (59 to 82° F)
Operating 10 to 32° C (50 to 90° F)
Standby -20 to 40° C (-4 to 104° F)
Humidity (% RH)
Optimum 20 to 70% RH
Operating 15 to 85% RH
Standby 5 to 85% RH...

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 1-25General Information
First Print Output Time
First Print Output Time (FPOT) is defined as a time from when the engine receives 
a Start signal in Ready state, until a single page is delivered to the output tray.
The following conditions are applied:
• The Controller does not keep the print engine waiting
• The printer is at Ready mode 
• Paper is A size Short Edge Feed (SEF)
• Process control time is not included
First Copy Output Time...

1-26 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  General Information
Physical Dimensions and Clearances
3010/3040 Dimensions
3045B Dimensions
3045N Dimensions
CharacteristicMeasurement
Height 208 mm ( 8.2 in.)
Width 358 mm ( 14.1 in.)
Depth 197 mm ( 7.8 in.) 
Weight (base printer with consumables) 4.6 kg (10.0 lb.)
CharacteristicMeasurement
Height 584 mm (23 in)
Height with 250-Sheet Feeder 690 mm (27.1 in.)
Width 430 mm (16.9 in.)
Depth 544 mm (21.4 in.) 
Weight (base printer...

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only 1-27General Information
Minimum Clearances
10 cm
(3.9 in.)
26.50 cm
(10.4 in.)10 cm
(3.9 in.)26.95 cm
(10.6 in.)
s3040-117
10 cm
(3.9 in.)
10 cm
(3.9 in.)10 cm
(3.9 in.)
20 cm
(7.9 in.)
67 cm
(26.4 in.)90.5 cm
(35.6 in.)
61 cm
(24 in.)
s3040-118 

1-28 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  General Information
Mounting Surface Specifications
Mounting surface flatness must be within the specified range. The printer must 
not be tipped or tilted more than 7 mm.
Failure to adhere to the mounting specifications void all guarantees of print-
quality and/or performance.
10 cm
(3.9 in.)
10 cm
(3.9 in.)10 cm
(3.9 in.)
20 cm
(7.9 in.)
67 cm
(26.4 in.)90.5 cm
(35.6 in.)
61 cm
(24 in.)
s3040-119
s3040-120
10° or 7mm
10° or 7mm