Home > Xerox > Printer > Xerox WorkCentre 3045 Service Manual

Xerox WorkCentre 3045 Service Manual

Here you can view all the pages of manual Xerox WorkCentre 3045 Service Manual. The Xerox manuals for Printer are available online for free. You can easily download all the documents as PDF.

Page 421

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only A-3Reference
CE Diags Menu Tree
ESS Diag
Digital Input
Digital Output
NVM Setting-Write
Print Info
Installation Set
Test Print
Parameter
Flash ROM Test
DRAM Test
IOT Test
Light Flash R/W Test
OP Panel Test
All Test
Config Page
Print Settings
Serial No.
Pixel Counter
Print Counter
Clear All NVM
Clear Job History
Test Pat ASIC [IOT]
Test Pattern LPH K [IOT]
Registration
Machine/Toner
Print Parameters
s3040-169 

Page 422

A-4 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  Reference
CE Diagnostics Screen
The CE Diags screen has four tabs.
• Printer Settings Report
Provides printer information, menu settings, information pages, and TCP/IP 
settings.
• Printer Maintenance
Provides access to printer settings such as paper type, altitude adjustment, 
and Fuser adjustments.
• Diagnosis
Outputs the test charts incorporated in the printer.
•CE Diag
Checks the operation of internal parts of the printer,...

Page 423

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only A-5Reference
ESS Diagnostics
ESS tests exercise major printer subsystems.
Digital Input Tests
Select the component from the drop down box. Click the Start button to begin the 
test. LOW or HIGH is displayed on the Result screen. The component operation is 
checked in such a way that the component status is changed from [LOW] to 
[HIGH] and vice versa by operating the actuator or opening/closing the door. To 
stop the operation, click Stop....

Page 424

A-6 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  Reference
NVM Operations
CS Diagnostics includes utilities for managing NVM.
Print Info
Installation Set
Displays values of the printer’s counters and sets service tags. To apply changes, 
click the Apply New Settings button, or the Restart printer to apply new settings 
button.
ScreenPurpose
NVM Settings - Write Used for changing the settings for internal 
data of the printer.
This operation is prohibited since it can 
damage the...

Page 425

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only A-7Reference
Te s t  P r i n t
Two test prints are available, Test pattern ASIC and LPH K. Select the pattern from 
the menu and click the print button.
Parameter
This function reads/writes the parameters in the table. Click Apply new settings or 
Restart printer to apply new settings button after the setting is completed to 
change the value in NVM.Print Counter Displays the respective counter values in the 
master NVM and backup NVM....

Page 426

A-8 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  Reference
Acronyms and Abbreviations
AcronymDescription
A3 Paper size 297 millimeters (11.69 inches) x 420 millimeters 
(16.54 inches).
A4 Paper size 210 millimeters (8.27 inches) x 297 millimeters (11.69 
inches).
A5 Paper size 148 millimeters (5.82 inches) x 210 millimeters (2.10 
inches).
AC Alternating Current is type of current available at power source 
for the printer.
ADC Automatic Density Control
AMPV Average Monthly Print...

Page 427

Phaser 3010/3040/WorkCentre 3045 Service Xerox Internal Use Only A-9Reference
ESD Electrostatic Discharge. A transfer of charge between bodies at 
different electrostactic potential.
ESS Image process controller
FCC Federal Communications Commission
FDR Feeder
FPOT First Print Output Time
FRU Field Replaceable Unit
GB Giga Byte
GDI Graphics Device Interface
GND Ground
HARN Harness
HCF High-Capacity Feeder
HDD Hard Disk Drive
HUM Humidity
HV High Voltage
HVPS High-Voltage Power Supply
Hz Hertz (cycles per...

Page 428

A-10 Xerox  Internal  Use  Only Phaser 3010/3040/WorkCentre 3045 Service  Reference
MM Millimeters
MOT Motor
MPT Multi-Purpose Tray
NCS Non-Contact Sensor
NVM Non-Volatile Memory
NVRAM Non-Volatile Random Access Memory
OHP Overhead Paper (Transparency)
OPT Optional
OS Operating System
PCB Printed Circuit Board
PCL Printer Command Language
PDL Page Description Language
P/J Plug Jack (electrical connections)
PJL Printer Job Language
PL Parts List
POP3 Post Office Protocol version 3
PPD PostScript Printer...

Page 429


				            

Page 430

Copyright © 2011, Xerox Corporation. 
All rights reserved. Unpublished 
rights reserved under the copyright 
laws of the United States.
Part#: 702P00125 
Start reading Xerox WorkCentre 3045 Service Manual

Related Manuals for Xerox WorkCentre 3045 Service Manual

All Xerox manuals