Xerox Workcentre 24 Pcl 6 Manual

2–87
USER GUIDE (PRINT)
Auto & High Speed
The possible feature combinations when Auto for Output Color 
and High Speed for Print Mode have been selected:
Graphics Options
Image 
Adjustment 
ModeRecommendedICM Adj. 
(System)CMS Adj. 
(Application)
Comple-
mentary 
Color 
Conversion
Image SettingsBrightnessAvailableNANAAvailable
ChromaAvailableNANAAvailable
ContrastAvailableNANAAvailable
Color BalanceBlackAvailableAvailableAvailableAvailable
CyanAvailableAvailableAvailableAvailable...

  
2–88
USER GUIDE (PRINT)
Auto & Standard
The possible feature combinations when Auto for Output Color 
and Standard for Print Mode have been selected:
Graphics Options
Image 
Adjustment 
ModeRecommendedICM Adj. 
(System)CMS Adj. 
(Application)
Comple-
mentary 
Color 
Conversion
Image SettingsBrightnessAvailableNANAAvailable
ChromaAvailableNANAAvailable
ContrastAvailableNANAAvailable
Color BalanceBlackAvailableAvailableAvailableAvailable
CyanAvailableAvailableAvailableAvailable...

2–89
USER GUIDE (PRINT)
Auto & High Quality
The possible feature combinations when Auto for Output Color 
and High Quality for Print Mode have been selected:
Graphics Options
Image 
Adjustment 
ModeRecommendedICM Adj. 
(System)CMS Adj. 
(Application)
Comple-
mentary 
Color 
Conversion
Image SettingsBrightnessAvailableNANAAvailable
ChromaAvailableNANAAvailable
ContrastAvailableNANAAvailable
Color BalanceBlackAvailableAvailableAvailableAvailable
CyanAvailableAvailableAvailableAvailable...

  
2–90
USER GUIDE (PRINT)
Printing with Auto
This section describes the possible feature combinations when 
Auto for Output Color and High Speed for Print Mode have been 
selected.
1Select Print from the File menu.
2Select the printer, and then select Properties.
3Select the Graphics tab.
4Select Auto from the Output Color drop-down list.
NOTE: You can also select from Output Color on the Paper/
Output tab. 
5Select the mode from the Print Mode drop-down list.
6Select the mode from the Image Adjustment...

2–91
USER GUIDE (PRINT)
Adjusting Color for Printing
This section explains how to configure detailed color settings for 
printing. These settings are configured on the Graphics tab. There 
are four tabs on the Graphics tab. The options are as follows:
OptionsContents
Image SettingsAdjusts the brightness, chroma, and 
contrast of the whole document or of 
each of the elements like text, graphic, 
and photos.
Color BalanceFine-tunes the toner density of black, 
cyan, magenta, and yellow. Can be 
set in...

  
2–92
USER GUIDE (PRINT)
Adjusting Image Settings (Brightness/Chroma/Contrast)
The brightness/chroma/contrast of the whole document or of each 
of the elements like text, graphic, and photos can be adjusted.
You can adjust the brightness/chroma/contrast within the range of 
-100 to 100 in units of 1. When adjusting for each of the elements 
within the page will be detected automatically and will be set to the 
appropriate value respectively.
Display the Image Settings tab to adjust these settings....

2–93
USER GUIDE (PRINT)
1Select Print from the File menu.
2Select the printer, and then select Properties.
3Select the Graphics tab and then Image Settings.
• The Graphics tab will be opened with the Image Setting tab 
displayed.
4Select either Apply to All Elements or Apply to Selected 
Element.
5When Apply to Selected Element has been selected, select the 
element from the list box on the right.
6Adjusts the settings of brightness, chroma, and contrast.
You can either enter the value or use the slider...

  
2–94
USER GUIDE (PRINT)
Adjusting Color Balance
You can adjust the toner density of Cyan, Magenta, Yellow, Black 
(CMYK) for printing. Each color can be adjusted to low/medium/
high density and in seven levels each within the range of -3 to 3.
Display the Color Balance tab to adjust these settings.
NOTE: When Output Color of the Graphics tab has been 
selected as Black, only black can be adjusted here.
1Select Print from the File menu.
2Select the printer, and then select Properties.
3Select the...

2–95
USER GUIDE (PRINT)
Adjusting Profile Settings
You can correct profile settings to match the characteristics of 
devices (like monitor and scanner) in order to reproduce graphic 
images consistently for printing. There are two types of profile 
settings:
• Color Temperature/Gamma Correction
• ICC Profile
For Color Temperature/Gamma Correction, you can specify the 
appropriate Color Temperature and Gamma Correction for all 
elements of a document.
OptionsContents
Color TemperatureChanges the color...

  
2–96
USER GUIDE (PRINT)
For Profile Settings, you can specify the ICC profile for Monitor 
and Input Image. ICC profile is a file that describes the 
characteristic about the device color. The selectable ICC profile 
applies only to the monitor and RBG scanner.
Browse... is displayed when ICC profile has been previously 
specified.
For both Monitor and Input Image, you can read the ICC profile 
from any folder. In the selection dialog box of ICC profile, only files 
with the ICC profile extension...