Xerox Phaser 8560N User Manual

Maintenance and Cleaning
Phaser® 8560 Color Printer 5-11
3.
Wipe the plastic paper release blade on the  lower paper guide with a pre-soaked alcohol 
cloth (using 90 percent isopropyl alcohol).
4. Lower the paper guide to  its original position.
5. Close the exit cover.
8560p-084
8560p-080
8560p-018
Downloaded From ManualsPrinter.com Manuals 

Maintenance and Cleaning
Phaser® 8560 Color Printer 5-12
Cleaning the Maintenan ce Kit Wiper Blade
The maintenance kit contains a wiper blade that  removes excess ink. To clean the maintenance 
kit wiper blade:
1. Open the side door.
2. Remove the maintenance kit (labeled  A) from the maintenance kit slot.
8560p-034
8560p-032
Downloaded From ManualsPrinter.com Manuals 

Maintenance and Cleaning
Phaser® 8560 Color Printer 5-13
3.
Use a lint-free cloth to clean the top and uppe r edges of the flexible plastic wiper blade 
located next to the roller.
4. Insert the maintenance kit and push it co mpletely into the maintenance kit slot.
5. Close the door.
8560p-070
8560p-033
8560p-038
Downloaded From ManualsPrinter.com Manuals 

Maintenance and Cleaning
Phaser® 8560 Color Printer 5-14
Cleaning the Outside of the Printer
To remove stains, clean the outside of the prin ter using a soft, damp, cloth moistened with a 
mild neutral detergent. Do not spray  detergent directly onto the printer.
Warning:  To prevent electric shock, turn the prin ter off and unplug the power cord from the 
electrical outlet before cleaning the printer.
Downloaded From ManualsPrinter.com Manuals 

Ordering Supplies
Phaser® 8560 Color Printer 5-15
Ordering Supplies
This section includes:
■Consumables  on page 5-15
■Routine Maintenance Items  on page 5-15
■When to Order Supplies on page 5-16
■Recycling Supplies on page 5-16
Certain consumables and routine  maintenance items need to be ordered occasionally. Each 
item includes installation in structions in the package.
Consumables
Solid ink is the only consumable for the Phaser 8560 printer.
Caution:  Use of ink other than Genuin e Xerox Solid Ink...

Ordering Supplies
Phaser® 8560 Color Printer 5-16
When to Order Supplies
The control panel displays a warning when the su pply nears its replacement time. Verify that 
you have replacements on hand. It is important  to order these supplies when the messages first 
appear to avoid interruptions to your printing.  The control panel displays an error message 
when the supply must be replaced.
To order supplies, contact your local reselle r or go to the Xerox Supplies website at...

Moving and Repacking the Printer
Phaser® 8560 Color Printer 5-17
Moving and Repacking the Printer
This section includes:
■Precautions for Moving the Printer  on page 5-17
■Moving the Printer Within the Office  on page 5-17
■Preparing the Printer for Shipment on page 5-19
Caution:  Parts of the printer are hot. To avoid person al injury or damage to the printer, allow 
the ink to solidify. Run the 
Shut Down for Moving Printer procedure on the control panel to 
cool the printer quickly.
Precautions for...

Moving and Repacking the Printer
Phaser® 8560 Color Printer 5-18
3.
Within  10 seconds  after turning off the printer, select 
Shut Down for Moving Printer on 
the control panel.
Note:  If you receive a 
Power Down Error-Head not Parked message at the control 
panel, the printer is not ready to be moved. If  the printhead is not locked, the printer can be 
damaged during shipment.
4. Verify that the flag in the exit tray is in  the raised position. When the flag is raised, the 
printhead is locked.
5....

Moving and Repacking the Printer
Phaser® 8560 Color Printer 5-19
Preparing the Printer for Shipment
Before shipping the printer:
1.Remove the maintenance kit and waste tray. See  Removing the Maintenance Kit and 
Wa s t e  Tr a y   on page 5-20.
2. Turn off the printer. See  Turning Off the Printer on page 5-22.
3. Pack the printer. See  Packing the Printer on page 5-24.
Repack the printer using the original packing material and boxes or a Xerox repackaging kit. 
Additional instructions for repack ing...

Moving and Repacking the Printer
Phaser® 8560 Color Printer 5-20
Removing the Maintenance Kit and Waste Tray
Before turning off the printer, remove  the maintenance kit and waste tray:
1. Open the door on the right side of the printer.
2. Remove the maintenance kit (labeled  A) and place it in a plastic bag for storage.
8560p-034
8560p-032
Downloaded From ManualsPrinter.com Manuals