Xerox Phaser 4510N User Manual

IPv6
Phaser® 4510 Laser Printer
2-14
IPv6
This section includes:
■Enabling IPv6 on page 2-14
■Setting the Interface ID on page 2-15
■Automatic Address Assignment on page 2-16
■DHCPv6 on page 2-17
■Manual Address Assignment on page 2-18
■Address Precedence on page 2-19
Enabling IPv6
IPv6 can be enabled or disabled independently of IPv4.
Note:If you disable both IPv4 and IPv6, you will lose your connection to the printer. For 
information on restoring the default TCP/IP settings, see Resetting the TCP/IP...

IPv6
Phaser® 4510 Laser Printer
2-15
Resetting the TCP/IP Configuration
Use the following procedure at the control panel to reset the TCP/IP configuration to the 
default settings:
1.Select 
Printer Setup, and then press the OK button.
2.Select 
Connection Setup, and then press the OK button.
3.Select 
Reset Connection Setup, and then press the OK button.
Setting the Interface ID
Your IPv6-enabled printer has one interface with multiple addresses. The Interface ID appears 
after the prefix. The printer...

IPv6
Phaser® 4510 Laser Printer
2-16
Automatic Address Assignment
Addresses are assigned automatically when a router is found that offers one or more prefixes. 
Automatically assigned addresses are routeable. Each router-supplied prefix is combined with 
the Interface ID to create an address. The use of router-supplied prefixes is enabled by default.
To enable/disable automatic address assignment, use one of the following options:
■The printer’s control panel
■CentreWare IS
Enabling/Disabling Automatic...

IPv6
Phaser® 4510 Laser Printer
2-17
DHCPv6
DHCPv6 is used to acquire TCP/IP information.
The following DHCPv6 options are available in CentreWare IS:
■As directed by the router - DHCPv6 is performed according to values in a router 
advertisement. This is the default setting.
■Always, for all configuration options (stateful) - Stateful DHCPv6 is always attempted, 
and router flags related to how to perform DHCP are ignored. Configuration options and 
an IPv6 address are accepted if DHCPv6 is successful....

IPv6
Phaser® 4510 Laser Printer
2-18
Manual Address Assignment
Enter an IPv6 address manually to add it to any other IPv6 addresses. To create a manual 
address, enter the IPv6 address and prefix length in the fields provided in CentreWare IS. The 
default prefix length is 64.
To manually set the IPv6 address, use one of the following options:
■The printer’s control panel
■CentreWare IS
Setting the IPv6 Address with the Control Panel
To set the IPv6 address on the control panel:
1.Select 
Printer Setup,...

IPv6
Phaser® 4510 Laser Printer
2-19
Address Precedence
Address precedence can be set to either an IPv6 or IPv4 address when both types are available. 
IPv6 is the default setting. Address Precedence can only be set in CentreWare IS.
Using CentreWare IS
To set address precedence using CentreWare IS:
1.Launch your web browser.
2.Enter your printer’s IP address in the browser’s Address field.
3.Click Properties.
4.Select the Protocols folder on the left navigation panel, and then click TCP/IP.
5.Click the...

Phaser® 4510 Laser Printer
3-1 This chapter includes:
■Overview of Basic Steps on page 3-2
■Supported Paper and Media on page 3-3
■Loading Paper on page 3-7
■Selecting Printing Options on page 3-18
■Printing on Both Sides of the Paper on page 3-23
■Printing on Specialty Media on page 3-25
Printing Basics
Downloaded From ManualsPrinter.com Manuals 

Overview of Basic Steps
Phaser® 4510 Laser Printer
3-2
Overview of Basic Steps
1.Load paper in the tray.
2.Adjust the width and length guides to fit the paper.
3.If you are prompted by the control panel, either confirm the paper type and size or change 
it as required.
4.From the software application, access the Print dialog box, and then select printing 
options in the printer driver. 
5.Send the job to the printer from the software application’s Print dialog box.
See also: 
Loading Paper on page 3-7...

Supported Paper and Media
Phaser® 4510 Laser Printer
3-3
Supported Paper and Media
This section includes:
■Paper Usage Guidelines on page 3-3
■Paper That Can Damage Your Printer on page 3-4
■Paper Storage Guidelines on page 3-5
■Supported Paper Sizes and Weights on page 3-5
Your printer is designed to be used with a variety of paper types. Follow the guidelines in this 
section to ensure the best print quality and to avoid jams.
For best results, use Xerox printing media specified for your Phaser 4510...

Supported Paper and Media
Phaser® 4510 Laser Printer
3-4
■Adjust the paper guides to fit the paper size. For Trays 2–4, the paper guides click into 
place when they are adjusted correctly.
■If excessive jams occur, use paper or other media from a new package.
Note:Printer reliability specifications may be affected by increased use of transparency, card 
stock, and labels. In addition, printer reliability may vary due to extended use of some media 
types.
See also: 
Printing Transparencies on page 3-25...