Xerox Phaser 4510N User Manual

Choosing a Connection Method
Phaser® 4510 Laser Printer
2-4
Connecting via USB
If you are connecting to one computer, a USB connection offers fast data speeds. However, a 
USB connection is not as fast as an Ethernet connection. To use USB, PC users must have 
Windows 2000/XP/Server 2003 or newer. Macintosh users must use Mac OS X, version 10.2 
and higher.
USB Connection
A USB connection requires a standard A/B USB cable. This cable is not included with your 
printer and must be purchased separately....

Configuring the Network Address
Phaser® 4510 Laser Printer
2-5
Configuring the Network Address
This section includes:
■TCP/IP and IP Addresses on page 2-5
■Automatically Setting the Printer’s IP Address on page 2-5
■Dynamic Methods of Setting the Printer’s IP Address on page 2-6
■Manually Setting the Printer’s IP Address on page 2-7
TCP/IP and IP Addresses
If your computer is on a large network, contact your network administrator for the appropriate 
TCP/IP addresses and additional configuration...

Configuring the Network Address
Phaser® 4510 Laser Printer
2-6
Dynamic Methods of Setting the Printer’s IP Address
There are two protocols available for dynamically setting the printer’s IP address: 
■DHCP  (enabled by default on all Phaser printers)
■AutoIP
You can turn on/off both protocols using the control panel, or use CentreWare IS to turn on/off 
DHCP.
Note:You can view the printer’s IP address at any time. On the control panel, select 
Information, press the OK button, select Printer...

Configuring the Network Address
Phaser® 4510 Laser Printer
2-7
Manually Setting the Printer’s IP Address
Note:Verify that your computer has a properly configured IP address for your network. 
Contact your network administrator for more information.
If you are on a network without a DHCP server, or in an environment where the network 
administrator assigns printer IP addresses, you can use this method to manually set the IP 
address. Manually setting the IP address overrides DHCP and AutoIP....

Configuring the Network Address
Phaser® 4510 Laser Printer
2-8
Changing or Modifying the IP Address Using CentreWare IS
CentreWare IS provides a simple interface that enables you to manage, configure, and monitor 
networked printers from your desktop using an embedded web server. For complete 
information about CentreWare IS, click the Help button in CentreWare IS to go to the 
CentreWare IS Online Help.
After setting the printer’s IP address, you can modify TCP/IP settings using CentreWare IS. 
1.Launch...

Installing the Printer Drivers
Phaser® 4510 Laser Printer
2-9
Installing the Printer Drivers
This section includes:
■Available Drivers on page 2-9
■Windows 2000 or Later on page 2-10
■Macintosh OS X, Version 10.3 and Higher on page 2-10
Available Drivers
To access special printing options, use a Xerox printer driver.
Xerox provides drivers for a variety of page description languages and operating systems. The 
following printer drivers are available:
* Go to www.xerox.com/drivers
 for the latest printer...

Installing the Printer Drivers
Phaser® 4510 Laser Printer
2-10
Windows 2000 or Later
To install the printer driver from the Software and Documentation CD-ROM:
1.Insert the CD-ROM into the computer’s CD-ROM drive. If the installer does not launch, 
do the following:
a.Click Start, and then click Run.
b.In the Run window, type: :\INSTALL.EXE.
2.Select your desired language from the list.
3.Select Install Printer Driver.
4.Select the installation method you want to use, and then follow the onscreen...

Installing the Printer Drivers
Phaser® 4510 Laser Printer
2-11
USB Connection
To install the printer driver from the Software and Documentation CD-ROM:
1.Insert the CD-ROM into the CD-ROM drive. Open the Printer Setup Utility for 
Mac OS X, version 10.3.x. 
Note:To locate utilities on the Macintosh hard drive, open the Applications folder, and 
then open the Utilities folder. 
2.Click the Add button.
3.Select USB from the drop-down menu.
4.Select the printer in the window.
5.Select Xerox from the...

Installing the Printer Drivers
Phaser® 4510 Laser Printer
2-12
Macintosh OS X, Version 10.4
Bonjour Connection
To install the printer driver from the Software and Documentation CD-ROM:
1.Insert the CD-ROM into the CD-ROM drive. 
2.Open the Printer Setup Utility.
Note:To locate utilities on the Macintosh hard drive, open the Applications folder, and 
then open the Utilities folder. 
3.Click the Add button.
4.Select the Default Browser in the Printer Browser.
5.Select the Bonjour printer in the list of...

Installing the Printer Drivers
Phaser® 4510 Laser Printer
2-13
LPD Connection
To install the printer driver from the Software and Documentation CD-ROM:
1.Insert the CD-ROM into the CD-ROM drive and select the VISE installer to install the 
printer software.
2.Once installation is complete, open the Printer Setup Utility. 
Note:To locate utilities on the Macintosh hard drive, open the Applications folder, and 
then open the Utilities folder. 
3.Click the Add button.
4.Select IP Printer from the upper left...