Xerox Phaser 4510DX User Manual

Printing on Specialty Media
Phaser® 4510 Laser Printer
3-45 7.If you selected 
New Custom Size, select the custom width and height:
a.For 
Short Edge, use the Up Arrow and Down Arrow buttons to specify the short 
edge, and then press the OKbutton.
b.For 
Long Edge, use the Up Arrow and Down Arrow buttons to specify the long 
edge, and then press the OK button.
c.If the control panel prompts you for the 
Paper Orientation, use the Up Arrow and 
Down Arrow buttons to select the direction you are feeding...

Phaser® 4510 Laser Printer
4-1 This chapter includes:
■Controlling the Quality of Your Prints on page 4-2
■Solving Print-Quality Problems on page 4-3
Print Quality
Downloaded From ManualsPrinter.com Manuals 

Controlling the Quality of Your Prints
Phaser® 4510 Laser Printer
4-2
Controlling the Quality of Your Prints
The print-quality mode directly controls the quality of your prints, and the paper type directly 
controls the print speed. You can change these settings in the printer driver or on the control 
panel.
Note:Driver settings override the control panel settings. 
See also: 
Advanced Features Guide at www.xerox.com/office/4510suppor
t
Selecting a Print-Quality Mode
There are two print-quality modes:...

Solving Print-Quality Problems
Phaser® 4510 Laser Printer
4-3
Solving Print-Quality Problems
Your printer is designed to produce consistently high-quality prints. If you observe print-
quality problems, use the information in this topic to diagnose the problem.
For best results, use only Xerox Printing Media. For information on supported paper types and 
weights, see Supported Paper and Media on page 3-3.
Caution:Damage caused by using unsupported paper, transparencies, and other specialty 
media is not...

Solving Print-Quality Problems
Phaser® 4510 Laser Printer
4-4
Light Prints
The overall image is lighter than normal.
Possible Causes Solutions
The paper may be damp. Replace the paper.
You may be using Draft mode. Turn off Draft mode.
The toner level may be low. If the print cartridge is low on toner, replace it.
Downloaded From ManualsPrinter.com Manuals 

Solving Print-Quality Problems
Phaser® 4510 Laser Printer
4-5
Blank Prints
The entire printed page is blank with no visible print.
Possible Causes Solutions
If you just installed a new print cartridge, the 
yellow sealing tape may still be in place.Remove the tape.
Multiple sheets may have been fed from the 
paper tray at the same time.Remove the paper from the paper tray and fan it. 
Also, ensure that the paper is correctly loaded in 
the tray.
Printable data may not have been received from 
the...

Solving Print-Quality Problems
Phaser® 4510 Laser Printer
4-6
Black Prints
The entire printed page is black.
Possible Causes Solutions
The print cartridge may be defective. Replace the print cartridge.
Printable data from the computer may be 
corrupted.Print a Configuration page. 
■If the Configuration page prints correctly, 
check the interface cable between the 
computer and the printer, and the application 
software. 
■If the connections appear normal, contact 
your Customer Support Center.
Downloaded...

Solving Print-Quality Problems
Phaser® 4510 Laser Printer
4-7
Horizontal Line Deletions
There are areas of print deletions that appear across the paper. 
Possible Causes Solutions
The print cartridge may not be installed correctly. Remove and re-install the print cartridge.
The print cartridge may be defective or at the end 
of its life.Replace the print cartridge.
The transfer roller may be defective. Replace the transfer roller (in the maintenance 
kit).
Downloaded From ManualsPrinter.com Manuals 

Solving Print-Quality Problems
Phaser® 4510 Laser Printer
4-8
Vertical Line Deletions
There are areas of print deletions that form narrow lines. 
Possible Causes Solutions
The paper may be defective with creases, folds, 
etc.Replace the paper.
The print cartridge may be defective or at the end 
of its life.Replace the print cartridge.
The transfer roller may be defective. Replace the transfer roller (in the maintenance 
kit).
Downloaded From ManualsPrinter.com Manuals 

Solving Print-Quality Problems
Phaser® 4510 Laser Printer
4-9
Horizontal Dark Streaks
There are black lines that appear horizontally on the page. 
Possible Causes Solutions
The print cartridge may be defective or at the end 
of its life.Replace the print cartridge.
The paper path may be contaminated with toner. Print several blank sheets of paper to remove the 
toner accumulations.
The fuser may be defective. Replace the fuser (in the maintenance kit).
Downloaded From ManualsPrinter.com Manuals