Xerox Phaser 3155 User Manual
Here you can view all the pages of manual Xerox Phaser 3155 User Manual. The Xerox manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 151
8 Chapter Service Parts Disassembly In this chapter... •Overview • Maintenance Items and Consumables •Covers • Disassembly Procedures •Feeder •Electrical • Solenoids and Sensors Downloaded From ManualsPrinter.com Manuals
Page 152
8-2Phaser 3140/3155/3160 Printer Service Manual Service Parts Disassembly Overview This section contains the removal proced ures for field-replaceable parts of the printer listed in the Parts List. In most cases, the replacement procedure is simply the reverse of the removal procedure. In some instances, additional steps are necessary and are provided for replacement of the parts. For specific assemblies and parts, refer to “Parts Lists” on page 9-4. Note Always use the correct type and size screw...
Page 153
Phaser 3140/3155/3160 Printer Service Manual8-3 Service Parts Disassembly Preparation Before you begin any removal and replacement procedure: 1. Wear an Electrostatic Discharge wrist strap to help prevent damaging to the sensitive electronics of the print circuit boards. 2. Turn the printer power Off and disconnect the power cord from the wall outlet. 3. Disconnect all computer interface cables from the printer. 4. Remove the Paper Tray (page 8-7). 5. Open the Front Cover. 6. Remove the Print Cartridge...
Page 154
8-4Phaser 3140/3155/3160 Printer Service Manual Service Parts Disassembly Notations in the Disassembly Text • The notation “(item X)” points to a numbered callout in the illustration corresponding to the disassembly procedure being performed. •The notation “PL X.X.X” indicates that this component is listed in the Parts List. • Bold arrows in an illustration show direction of movement when removing or replacing a component. • The notation “(tap, plastic, 10 mm)” or “(metal, 6 mm)” refer to the type of...
Page 155
Phaser 3140/3155/3160 Printer Service Manual8-5 Service Parts Disassembly Fastener Types The following table lists the primary types of Posi-Drive screws used to assemble the printer. The procedures provide dime nsional specifications for screws being removed. Caution Use care when installing self-tapping sc rews in plastic. To properly start the screw in plastic, turn the screw counter-clockwise in the hole until you feel the screw engage the threads, then tighten as usual. Always use the correct...
Page 156
8-6Phaser 3140/3155/3160 Printer Service Manual Service Parts Disassembly Maintenance Items and Consumables Maintenance items include the Transfer Roller, Fuser, Pick Up Roller, and Tray. The Print Cartridge is the only consumable item. Print Cartridge PL1.0.12 Caution Do not touch the OPC drum or expose the Print Cartridge to light for more than 5 minutes. 1. Open the front cover. 2. Pull the Print Cartridge out. s3160-094 Downloaded From ManualsPrinter.com Manuals
Page 157
Phaser 3140/3155/3160 Printer Service Manual8-7 Service Parts Disassembly Paper Tray PL10.0 1. Pull the Tray out of the printer. s3160-014 Downloaded From ManualsPrinter.com Manuals
Page 158
8-8Phaser 3140/3155/3160 Printer Service Manual Service Parts Disassembly Transfer Roller PL1.0.8 Caution Do not touch the surface of the Transfer Roller. 1. Open the Front Cover. 2. Take out the Print Cartridge (page 8-6). 3. Remove the Laser Unit (page 8-30). 4. Take off the Transfer Roller by releasing the right side from the hook. Caution Use a screwdriver to gently push on the hook while using care to not break the hook. Replacement Note When replacing the Transfer Roller, wrap a sheet of paper...
Page 159
Phaser 3140/3155/3160 Printer Service Manual8-9 Service Parts Disassembly Pick Up Roller PL8.0 1. Remove the Paper Tray. 2. Turn the printer over. 3. Remove 1 screw (silver, 6 mm, plastic, tap). 4. Use a flat screwdriver to carefully lift the tab off of the Pick Up Roller. s3160-043 s3160-044 Downloaded From ManualsPrinter.com Manuals
Page 160
8-10Phaser 3140/3155/3160 Printer Service Manual Service Parts Disassembly 5. Rotate the Pick Up Roller and lift it off the shaft. Replacement Note The following illustration shows how the Pick Up Roller is attached to the Feed Roller Shaft. s3160-045 Feed Roller Clip Feed Roller Shaft Feed Roller s3160-046 Downloaded From ManualsPrinter.com Manuals